Will thicker brake pads mean a firmer feel at lever ?
#1
Senior Member
Thread Starter
Will thicker brake pads mean a firmer feel at lever ?
Hi all ,
I have an Avid juicy Turbo SL mountain bike disc brake .
Its lever is a bit soggy.
pads have medium amount of wear .
I know of a company that make replacement pads that are a good deal thicker than the stock set .
So just wondering , If I replace the pads with thicker ones will it firm up the lever some so that I can avoid the cost and hassle of a bleed kit ?
Thanks ,
J
I have an Avid juicy Turbo SL mountain bike disc brake .
Its lever is a bit soggy.
pads have medium amount of wear .
I know of a company that make replacement pads that are a good deal thicker than the stock set .
So just wondering , If I replace the pads with thicker ones will it firm up the lever some so that I can avoid the cost and hassle of a bleed kit ?
Thanks ,
J
#2
Really Old Senior Member
How would it do this?
#3
Banned
you complaining your hydraulic disc brakes feel too smooth?
Do the thing you don't want to do..
have you bled any air bubbles out of the system?, you have to do that occasionally, as normal maintenance..
you can get the bleed kit or just pay a bike shop to do it for you, that solves the 'Hassle' issue.
not thicker, but I like the compound Kool Stop used on the replacement pads , I bought for my BB7.. Organic compound my choice,
though they offer a metallic sintered compound pad as well.. https://www.koolstop.com/english/disc_pads.html
(And its DOT brake Fluid, so it can absorb moisture , maybe part of the problem? and damage paint, if not wiped off soon)
wear disposable gloves.. safety glasses...
....
Do the thing you don't want to do..
have you bled any air bubbles out of the system?, you have to do that occasionally, as normal maintenance..
you can get the bleed kit or just pay a bike shop to do it for you, that solves the 'Hassle' issue.
not thicker, but I like the compound Kool Stop used on the replacement pads , I bought for my BB7.. Organic compound my choice,
though they offer a metallic sintered compound pad as well.. https://www.koolstop.com/english/disc_pads.html
(And its DOT brake Fluid, so it can absorb moisture , maybe part of the problem? and damage paint, if not wiped off soon)
wear disposable gloves.. safety glasses...
....
Last edited by fietsbob; 01-13-18 at 05:51 PM.
#4
Senior Member
If you're pads are very worn, new pads can sometimes firm up the feel. If the pads are basically the designed stock thickness, then the problem is a bleed not the pads.
#5
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,725
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5793 Post(s)
Liked 2,585 Times
in
1,433 Posts
No. Pad material isn't elastic enough to make a difference.
Divide your system into elements based on flex or compressibility. Once you do so, you'll see that the biggest cause of sponginess is air in the lines, which is why nothing can do more than properly bleeding the system.
Divide your system into elements based on flex or compressibility. Once you do so, you'll see that the biggest cause of sponginess is air in the lines, which is why nothing can do more than properly bleeding the system.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#6
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,096
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4210 Post(s)
Liked 3,878 Times
in
2,315 Posts
I'd be curious if the OP is talking about the feel of the brake lever AFTER pad/rotor contact is made or is really meaning the amount of lever pull to start braking action. I have customers who confuse these two separate but related aspects. Andy
#8
Senior Member
Join Date: May 2014
Location: Singapore
Posts: 470
Bikes: Voodoo Hoodoo, Linus Libertine
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 106 Post(s)
Likes: 0
Liked 15 Times
in
9 Posts
No. It just means there is less clearance from each braking surface, and what you would feel is less range of motion before the biting point.
Thread
Thread Starter
Forum
Replies
Last Post
megalowmatt
Bicycle Mechanics
14
11-09-13 01:21 PM
epnnf
Bicycle Mechanics
6
11-22-10 11:01 AM