How long should rim brake carbon wheel sets last?
#1
Full Member
Thread Starter
How long should rim brake carbon wheel sets last?
For the weekend warrior type, non competitive rider. How long should these wheels be expected to last as long as they are reputable?
__________________
www.mp-aviation.com
www.mp-aviation.com
#2
Full Member
Join Date: Jul 2007
Location: SF Bay Area
Posts: 242
Bikes: 2020 Pinarello Dogma F12 Disc (Enve SES 3.4), 2021 S-Works Aethos (Roval Alpinist CLX II), 2024 Topstone Lab71 (Terra CLX II), 2006 Cervelo Soloist (10 speed Ultegra), 2021 S-Works Epic
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 74 Post(s)
Liked 74 Times
in
34 Posts
A very long time, particularly if you don’t do a ton of miles. I had 7,000 miles on my Zipp 303 rim brake Firecrests before I donated that bike to a kid on my high school MTB team. The brake track showed no signs of wear. I chose Zipp at that time (2014) because they had much more stopping power than the Rovals I tried. I believe at this point pretty much every big maker makes a reliable and sturdy brake track. Fear not!
I do have to be a little careful not to let my wheels drop into ruts in the road. That can mar the edge of the rim.
I do have to be a little careful not to let my wheels drop into ruts in the road. That can mar the edge of the rim.
#3
Senior Member
Just like with aluminum wheels, brake track longevity is determined by the hardness of the brake pads and how clean you keep the brake track/pads. If you stay on top of this maintenance, the brake track will last a very, very long time. Also, assuming the wheel has been built correctly, the rim integrity should hold up for a lifetime.
#4
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,433 Times
in
1,187 Posts
Likes For GlennR:
#5
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,052
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22598 Post(s)
Liked 8,925 Times
in
4,158 Posts
Agree they should last a long time. That said, I have a lovely Williams 38 front wheel that hit a stray rock and the crabon cracked. So stuff happens, but if you don't hit something like a rock they should last plenty.
Which ones are you getting???
Which ones are you getting???
Likes For noodle soup:
#7
Senior Member
Not worlds apart from using aluminum. If you're riding in clean conditions, its typically basically forever. If you're doing a lot of wet riding and your regional roads are covered in a particularly abrasive grime, it may be relatively short.
#8
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,433 Times
in
1,187 Posts
#9
I eat carbide.
Join Date: Jan 2006
Location: Elgin, IL
Posts: 21,627
Bikes: Lots. Van Dessel and Squid Dealer
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1325 Post(s)
Liked 1,306 Times
in
560 Posts
They should last forever - If you never ride them.
All rim brake rims are a wear component. Use and conditions can reduce or accelerate wear.
They last long enough otherwise there'd be 10,000 threads on here about how no one would ever buy them as they always wear out.
I have seen them wear out in customer's hands. Some. Those customers were ....well....riding. A lot usually. More than most people and/or in all conditions and with lots of long descents. Most that I have seen wear out were rim brake cyclocross use carbon with sand and mud braking conditions.
Regular casual road riders like 90% of this forum....never wear out.
Just make sure you have the right pads (ask manufacturer), and keep the system clean-ish between uses. In other words if you ride in a ton of slop them wash off the bike and brakes when you're done. Inspect the pads every few months and see if there is debris in them. Don't use the same pads for you aluminum and carbon. Yes you can sometimes but the alloy will get caught in the pad material and eat the shiz out of the rims.
All rim brake rims are a wear component. Use and conditions can reduce or accelerate wear.
They last long enough otherwise there'd be 10,000 threads on here about how no one would ever buy them as they always wear out.
I have seen them wear out in customer's hands. Some. Those customers were ....well....riding. A lot usually. More than most people and/or in all conditions and with lots of long descents. Most that I have seen wear out were rim brake cyclocross use carbon with sand and mud braking conditions.
Regular casual road riders like 90% of this forum....never wear out.
Just make sure you have the right pads (ask manufacturer), and keep the system clean-ish between uses. In other words if you ride in a ton of slop them wash off the bike and brakes when you're done. Inspect the pads every few months and see if there is debris in them. Don't use the same pads for you aluminum and carbon. Yes you can sometimes but the alloy will get caught in the pad material and eat the shiz out of the rims.
__________________
PSIMET Wheels, PSIMET Racing, PSIMET Neutral Race Support, and 11 Jackson Coffee
Podcast - YouTube Channel
Video about PSIMET Wheels
Podcast - YouTube Channel
Video about PSIMET Wheels
Likes For Psimet2001:
#10
Senior Member
Join Date: Mar 2010
Location: Seattle, WA
Posts: 23,208
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 18883 Post(s)
Liked 10,646 Times
in
6,054 Posts
Two or three rides.
Likes For Seattle Forrest:
#11
Senior Member
In my experience, if you're using the right brake pads, keeping them dedicated to carbon rims, and not constantly riding through muck and grit, the life of a carbon rim depends on how long you can go until you crash it into a curb or something like that.
Tubular rims suffer bangs and collisions better than clinchers, in my experience.
#12
Full Member
Thread Starter
#13
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,052
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22598 Post(s)
Liked 8,925 Times
in
4,158 Posts
#14
Full Member
Thread Starter
Yessir! Came with them.
__________________
www.mp-aviation.com
www.mp-aviation.com