Numb fingers / change grip?
#1
Newbie
Thread Starter
Join Date: Jun 2019
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Numb fingers / change grip?
Hi,
I am not an avid bike rider but I want to do it every so often. I did an 18 mile for the first time in a LONG time on a friends bike that was a little too tall for me. By the end of it both hands were completely numb. The next day it was just my pinky, ring finger and palm on both hands. 2.5 weeks later and they are STILL numb. I assume I need to go to the DR for that so my question to you all is... Can I change my grip if my bike is a GripShift? The ones I see on Amazon seem to be longer, so maybe I just need to cut them? I am in the process of getting a new bike and the ones I am coming across in my price range of mostly Gripshifts BUT if I can't change the grip then I need to look into ones with different shifts.
Also, does it matter if it dual suspension? I was told that since I am not doing crazy trails and stuff that I should stick with single b/c it will be easier to ride.
Thanks.
I am not an avid bike rider but I want to do it every so often. I did an 18 mile for the first time in a LONG time on a friends bike that was a little too tall for me. By the end of it both hands were completely numb. The next day it was just my pinky, ring finger and palm on both hands. 2.5 weeks later and they are STILL numb. I assume I need to go to the DR for that so my question to you all is... Can I change my grip if my bike is a GripShift? The ones I see on Amazon seem to be longer, so maybe I just need to cut them? I am in the process of getting a new bike and the ones I am coming across in my price range of mostly Gripshifts BUT if I can't change the grip then I need to look into ones with different shifts.
Also, does it matter if it dual suspension? I was told that since I am not doing crazy trails and stuff that I should stick with single b/c it will be easier to ride.
Thanks.
#2
Señor Member
Join Date: Feb 2013
Posts: 5,066
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 649 Post(s)
Liked 293 Times
in
216 Posts
Often when experiencing excessive pressure in your hands, the root of the problem is not the bars or grips, but elsewhere in the way the bike fits. We know the bike you were riding is not a good fit in general, but there may be simple adjustments that can make it better.
The first thing I look for when someone complains of hand pressure is the saddle position - if the saddle is nose-down, your weight slides forward and your hands are then responsible for pushing you back, almost subconsciously.
The first thing I look for when someone complains of hand pressure is the saddle position - if the saddle is nose-down, your weight slides forward and your hands are then responsible for pushing you back, almost subconsciously.
#3
Newbie
Thread Starter
Join Date: Jun 2019
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Ok. So isn't going to make much of a difference with what type of bike I get and I want to make sure the seat is flat and not tilted down? Do you know if gripshift grips can be changed though?
#4
Senior Member
Join Date: Aug 2017
Location: Mid Atlantic / USA
Posts: 2,115
Bikes: 2017 Specialized Crosstrail / 2013 Trek Crossrip Elite
Mentioned: 43 Post(s)
Tagged: 0 Thread(s)
Quoted: 1002 Post(s)
Liked 237 Times
in
155 Posts
You can find short grips that are meant to be used with grip shifters.
You can also use a locking full size grip (as long as it's got a hard rigid core) that just hangs off the end of the bar. It will make the bar 2 inches longer but it'll work.
#5
Señor Member
Join Date: Feb 2013
Posts: 5,066
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 649 Post(s)
Liked 293 Times
in
216 Posts
While this may seem possible, I believe it is a bad idea. If the grip is not fully on the bar you are essentially using the inner plastic tube of the grip as a structural part. I assure you it was not meant to be used this way. A friend of mine's city bike has an arrangement like this, and luckily he only uses that bike for ~10 rides per year of less than 2 km. Handlebars are made of steel, aluminum or carbon fibre and are designed to hold the weight of the rider. The plastic tubes inside grips are not made for this.
#6
Banned
Grip, ..your hands, .. relaxed or tight? take 1 hand off the bars and let them relax , occasionally?
gloved hand with a padding gap in the palm si nerves not compressed..
Im a JRA type now , not s mountain bike guy , bit I fit the Ergon grip bar end for grip shifters , on my folding bike..
Is it a 1 to 2 thousand dollar plus dual suspension bike bought at a specialist bike shop ?
or was it a sub $400 one bought at a mass merchant / sporting goods Big Box store ?
...
gloved hand with a padding gap in the palm si nerves not compressed..
Im a JRA type now , not s mountain bike guy , bit I fit the Ergon grip bar end for grip shifters , on my folding bike..
Also, does it matter if it dual suspension?
or was it a sub $400 one bought at a mass merchant / sporting goods Big Box store ?
...
#7
Newbie
Thread Starter
Join Date: Jun 2019
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I know my hands were tight b/c I was leaning forward since it wasn't the correct fit for me.
I was trying to get away from wearing gloves b/c of the heat but if I need to to prevent this from happening again then I will. I know once I get a bike that fits me better it shouldn't happen BUT I am leary since I am still numb 2.5 weeks later.
I will look into the Ergon grips!
I am looking for a used and/or one from mass merchant.
I was trying to get away from wearing gloves b/c of the heat but if I need to to prevent this from happening again then I will. I know once I get a bike that fits me better it shouldn't happen BUT I am leary since I am still numb 2.5 weeks later.
I will look into the Ergon grips!
I am looking for a used and/or one from mass merchant.
#8
Senior Member
Join Date: Feb 2006
Location: Sin City, Nevada
Posts: 2,886
Bikes: Catrike 700, Greenspeed GTO trike, , Linear LWB recumbent, Haluzak Horizon SWB recumbent, Balance 450 MTB, Cannondale SM800 Beast of the East
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 523 Post(s)
Likes: 0
Liked 230 Times
in
182 Posts
It is called "bicyclist palsy" a form of carpal tunnel syndrome. Look it up. Don't ignore the symptoms. I go to the orthopedic doctor today to have the stitches taken out after carpal tunnel release surgery. It only gets worse. If you are still experiencing the symptoms after 2.5 weeks you need to see a doctor. I long ago switched to recumbents that don't put any pressure on your hands but it still got worse over the years until I could no longer ignore it.
#9
Senior Member
Join Date: Aug 2017
Location: Mid Atlantic / USA
Posts: 2,115
Bikes: 2017 Specialized Crosstrail / 2013 Trek Crossrip Elite
Mentioned: 43 Post(s)
Tagged: 0 Thread(s)
Quoted: 1002 Post(s)
Liked 237 Times
in
155 Posts
While this may seem possible, I believe it is a bad idea. If the grip is not fully on the bar you are essentially using the inner plastic tube of the grip as a structural part. I assure you it was not meant to be used this way. A friend of mine's city bike has an arrangement like this, and luckily he only uses that bike for ~10 rides per year of less than 2 km. Handlebars are made of steel, aluminum or carbon fibre and are designed to hold the weight of the rider. The plastic tubes inside grips are not made for this.
You certainly wouldn't want an ergonomic grip for this reason as your hand would be out of position if it's far to the interior. You'd want a uniformly round one.
For sure though....this is not an ideal solution. At best this is a stop gap until you can come up with something better.
Or just get trigger shifters and go to normal hand grips that have thousands upon thousands of options for every size and shape hand.
#10
Senior Member
Join Date: Aug 2017
Location: Mid Atlantic / USA
Posts: 2,115
Bikes: 2017 Specialized Crosstrail / 2013 Trek Crossrip Elite
Mentioned: 43 Post(s)
Tagged: 0 Thread(s)
Quoted: 1002 Post(s)
Liked 237 Times
in
155 Posts
I know my hands were tight b/c I was leaning forward since it wasn't the correct fit for me.
I was trying to get away from wearing gloves b/c of the heat but if I need to to prevent this from happening again then I will. I know once I get a bike that fits me better it shouldn't happen BUT I am leary since I am still numb 2.5 weeks later.
I will look into the Ergon grips!
I am looking for a used and/or one from mass merchant.
I was trying to get away from wearing gloves b/c of the heat but if I need to to prevent this from happening again then I will. I know once I get a bike that fits me better it shouldn't happen BUT I am leary since I am still numb 2.5 weeks later.
I will look into the Ergon grips!
I am looking for a used and/or one from mass merchant.
Make those stronger (those muscles grow pretty quick) and you'll be amazing how much less you are leaning on the bars as your core and get you more up right.
#11
Senior Member
https://www.bikeforums.net/hybrid-bi...-shifters.html
I just switched to a microSHIFT thumb shifter. I was having issues dealing with the two parts & extra room a grip shifter requires too. I have a SRAM Eagle, 12 speed, 1X group-set, which typically comes with either a grip or trigger shifter. The microSHIFT showed up on Amazon when I searched “12 speed shifters”.
The thread I ran explores the many benefits of this shifting system. They last longer, shift easier, can be used in indexed or friction modes....They take up the least space on handlebars too.
I just switched to a microSHIFT thumb shifter. I was having issues dealing with the two parts & extra room a grip shifter requires too. I have a SRAM Eagle, 12 speed, 1X group-set, which typically comes with either a grip or trigger shifter. The microSHIFT showed up on Amazon when I searched “12 speed shifters”.
The thread I ran explores the many benefits of this shifting system. They last longer, shift easier, can be used in indexed or friction modes....They take up the least space on handlebars too.
#12
Senior Member
This post from BF has helped me tremendously with numb hands.
https://www.bikeforums.net/12953035-post7.html
https://www.bikeforums.net/12953035-post7.html
#13
Banned
Join Date: Mar 2018
Location: Providence
Posts: 732
Bikes: Specialized tarmac sl2 giant tcx zero
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 319 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
yeah , id say you just have to tough up , or you have a serious medical issue , you can pad and adjust but if you road once and had numbies for weeks thats not normal !!!
#14
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
I've ridden several centuries with a grip shifter, and I'm of the opinion that they generally suck for distance riding because a) you really have to keep your hands at the ready in a numbing position to use them on the fly and b) the actual repetitive twisting motion of shifting very quickly gets uncomfortable on the wrists. For me, at least, it just really isn't a technology suitable for endurance.
Ignore @Teamprovicycle . This is a case where the bad fit of the bike probably caused the problem, and it's not necessarily a matter of "tough up" or "serious medical issue". Numbness is telling you not to do what you did again, but it's not unusual for it to take weeks to go away. There wouldn't be any harm in talking to a doctor, but I'll bet the doctor won't tell you anything you don't already know, and if it's like most doctors these days, you'll wait so long for the appointment that the problem will probably be gone once you get there.
Ignore @Teamprovicycle . This is a case where the bad fit of the bike probably caused the problem, and it's not necessarily a matter of "tough up" or "serious medical issue". Numbness is telling you not to do what you did again, but it's not unusual for it to take weeks to go away. There wouldn't be any harm in talking to a doctor, but I'll bet the doctor won't tell you anything you don't already know, and if it's like most doctors these days, you'll wait so long for the appointment that the problem will probably be gone once you get there.
#15
Junior Member
Join Date: May 2013
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
you can try Ergon grips, they may help.... I have them -and they make them for Gripshift compatibility. They may or may not help you, they are good for me... YMMV.
#16
Senior Member
Join Date: Jun 2007
Location: Wisconsin
Posts: 6,319
Bikes: 2012 Salsa Casseroll, 2009 Kona Blast
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked 208 Times
in
146 Posts
I know my hands were tight b/c I was leaning forward since it wasn't the correct fit for me.
I was trying to get away from wearing gloves b/c of the heat but if I need to to prevent this from happening again then I will. I know once I get a bike that fits me better it shouldn't happen BUT I am leary since I am still numb 2.5 weeks later.
I will look into the Ergon grips!
I am looking for a used and/or one from mass merchant.
I was trying to get away from wearing gloves b/c of the heat but if I need to to prevent this from happening again then I will. I know once I get a bike that fits me better it shouldn't happen BUT I am leary since I am still numb 2.5 weeks later.
I will look into the Ergon grips!
I am looking for a used and/or one from mass merchant.
#18
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts