Using different pedals on single bike.
#1
Newbie
Thread Starter
Using different pedals on single bike.
Has anybody used different pedals on single bike? Currently, I have Look Keo Blade, but I can buy just one Garmin Vector 3 pedal with powermeter. In result my setup will be Garmin on non-drive side and Look Keo on a drive side.
Likes For rublow:
#3
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
Having two different pedal/cleat systems means that stack height will be different between right and left.
Stack height is distance from center of pedal spindle to bottom surface of shoe.
Saddle height is usually adjusted if stack height increases or decreases. Saddle height won't be correct for either or both legs if stack height is different between right and left.
Stack height is distance from center of pedal spindle to bottom surface of shoe.
Saddle height is usually adjusted if stack height increases or decreases. Saddle height won't be correct for either or both legs if stack height is different between right and left.
#4
Junior Member
Bad idea. Wait till you can afford an actual pair of pedals. While you might be able to correct leg length with shims if you really were meticulous about it, clipping in and out will be different on both sides, which Is an accident waiting to happen. A jury-rigged setup kinda defeats the whole purpose of training with a power meter, don’t you think !?!
But, it’s your bike...
But, it’s your bike...
#6
Banned
You mean right one is different, from a different company on a road bike ..
Not a road bike, not a Garmin high tech data gathering dependent cyclist,
but my Brompton came with only a left folding pedal , the right one does not fold, so they are different..
....
Not a road bike, not a Garmin high tech data gathering dependent cyclist,
but my Brompton came with only a left folding pedal , the right one does not fold, so they are different..
....
#7
Senior Member
Join Date: Oct 2013
Location: Oahu, HI
Posts: 1,396
Bikes: 89 Paramount OS 84 Fuji Touring Series III New! 2013 Focus Izalco Ergoride
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 285 Post(s)
Likes: 0
Liked 74 Times
in
54 Posts
Garmin sells the single-side power meter so I would assume people are using them with Look Keos on the drive side.
scott s.
.
scott s.
.
#8
Senior Member
Join Date: Jan 2011
Location: Pinehurst, NC, US
Posts: 1,716
Bikes: 2020 Trek Emonda SL6, 90's Vintage EL-OS Steel Bianchi with 2014 Campy Chorus Upgrade
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 452 Post(s)
Liked 162 Times
in
110 Posts
Garmin single sided vector pedals are sold as a pair of pedals, but power is measured on one side only.
dave
dave