Go Back  Bike Forums > Bike Forums > Training & Nutrition
Reload this Page >

Gearing on a dedicated trainer bike

Notices
Training & Nutrition Learn how to develop a training schedule that's good for you. What should you eat and drink on your ride? Learn everything you need to know about training and nutrition here.

Gearing on a dedicated trainer bike

Old 07-16-19, 08:34 AM
  #1  
Mr_Crankypants
Junior Member
Thread Starter
 
Join Date: Jul 2018
Posts: 20
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Gearing on a dedicated trainer bike

I'm considering picking up an inexpensive bike to leave on the trainer. I currently have an 11-speed cassette on the trainer because my TCR currently does double duty as an indoor and outdoor bike.

What I'm wondering is whether it would be worth it to upgrade the cheap bike drivetrain to 11-speed or just deal with 8- or 9-speed, depending on whether I get a bike with Claris or Sora. For those of you who have dedicated trainer bikes: is the gearing the same as your outdoor bike(s)? If not, how much does it bother you on the trainer to have bigger gaps between sprockets than what you're used to outdoors?
Mr_Crankypants is offline  
Old 07-16-19, 11:40 AM
  #2  
rubiksoval
Senior Member
 
Join Date: Nov 2015
Location: Music City, USA
Posts: 4,444

Bikes: bikes

Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 2622 Post(s)
Liked 1,429 Times in 711 Posts
What is there to deal with? I've never gone through my entire cassette range on the trainer (nor do I hardly ever do that outdoors, either).

Makes no difference if I'm on 8 or 11 speed inside. Get a tighter spaced cassette if there are issues with gaps in gears. It's a trainer, after all. Not like you're going to run out of gears and fall over.
rubiksoval is offline  
Likes For rubiksoval:
Old 07-16-19, 01:53 PM
  #3  
SpinClassSara
Senior Member
 
SpinClassSara's Avatar
 
Join Date: Jun 2019
Location: NYC
Posts: 122
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 24 Times in 17 Posts
I take spin class. Is that what you mean?
SpinClassSara is offline  
Old 07-16-19, 02:01 PM
  #4  
gregf83 
Senior Member
 
Join Date: Jun 2008
Location: Vancouver, BC
Posts: 9,201
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 1186 Post(s)
Liked 289 Times in 177 Posts
I just do 20 min intervals on a KK trainer so only ever use 2 to 3 gears, a couple for the interval on the big ring and the little ring for recovery.

If you have a smart trainer and do swift you might need a few more gears but 8 seems like plenty.

Last edited by gregf83; 07-18-19 at 09:16 AM. Reason: typo
gregf83 is offline  
Old 07-16-19, 02:11 PM
  #5  
caloso
Senior Member
 
caloso's Avatar
 
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865

Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur

Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times in 1,417 Posts
I doubt I use more than 3 or 4 cogs of the cassette when I'm on the trainer. In fact, I had to get a cheap cassette because I was wearing out the middle cogs.
caloso is offline  
Old 07-16-19, 02:35 PM
  #6  
MinnMan
Senior Member
 
MinnMan's Avatar
 
Join Date: Aug 2009
Location: Minneapolis
Posts: 5,735

Bikes: 2022 Salsa Beargrease Carbon Deore 11, 2020 Salsa Warbird GRX 600, 2020 Canyon Ultimate CF SLX disc 9.0 Di2, 2020 Catrike Eola, 2016 Masi cxgr, 2011, Felt F3 Ltd, 2010 Trek 2.1, 2009 KHS Flite 220

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 4266 Post(s)
Liked 2,938 Times in 1,812 Posts
no
MinnMan is offline  
Old 07-16-19, 04:04 PM
  #7  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,625

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,560 Times in 1,574 Posts
Originally Posted by Mr_Crankypants
how much does it bother you on the trainer to have bigger gaps between sprockets than what you're used to outdoors?
Sounds like a good problem to have while "training."
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Old 07-16-19, 06:36 PM
  #8  
jadocs
Senior Member
 
jadocs's Avatar
 
Join Date: Jul 2018
Location: USA
Posts: 2,192

Bikes: Ti, Mn Cr Ni Mo Nb, Al, C

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 942 Post(s)
Liked 526 Times in 349 Posts
I primarily use my 9 speed on my smart rollers and ZWIFT. My other bike is an 11 speed. It doesn’t affect me at all because I am focused on my effort and power. I have been out of gears a few times on some long climbs but that is a good thing because it forced me to suck it up and continue to push...it was either that or tip over.
jadocs is offline  
Old 07-17-19, 08:03 AM
  #9  
TimothyH
- Soli Deo Gloria -
 
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,782

Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix

Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times in 469 Posts
Originally Posted by jadocs
I primarily use my 9 speed on my smart rollers and ZWIFT. My other bike is an 11 speed. It doesn’t affect me at all because I am focused on my effort and power. I have been out of gears a few times on some long climbs but that is a good thing because it forced me to suck it up and continue to push...it was either that or tip over.
Bold/Red is why "Gaps between gears" is a problem which is often overstated.

When a wide(er) range cassette was installed on my gravel bike I hunted for the correct gear but after a couple of weeks I got used to it. Over the next few months I got stronger, was able to push through on the gear I had and it wasn't a big deal.


-Tim-
TimothyH is offline  
Old 07-17-19, 08:38 AM
  #10  
base2 
I am potato.
 
base2's Avatar
 
Join Date: Jun 2015
Location: Pacific Northwest
Posts: 3,073

Bikes: Only precision built, custom high performance elitist machines of the highest caliber. 🍆

Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1764 Post(s)
Liked 1,577 Times in 910 Posts
On a trainer bike, I would select the tightest ratio cassette I could find. The idea is being able to dial in a desired cadence at whatever powerlevel/speed I see fit.

Wide range cassettes would make that more the cadence jumps larger & thus less desirable. IMO

I'm sure others may suggest something different under an alternate rationale. And that is ok too.
base2 is offline  
Old 07-17-19, 09:14 AM
  #11  
TimothyH
- Soli Deo Gloria -
 
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,782

Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix

Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times in 469 Posts
Originally Posted by base2
On a trainer bike, I would select the tightest ratio cassette I could find. The idea is being able to dial in a desired cadence at whatever powerlevel/speed I see fit.

Wide range cassettes would make that more the cadence jumps larger & thus less desirable. IMO

I'm sure others may suggest something different under an alternate rationale. And that is ok too.
In spite of my post, I can see the point in this on a trainer.


-Tim-
TimothyH is offline  
Old 07-17-19, 11:30 AM
  #12  
jadocs
Senior Member
 
jadocs's Avatar
 
Join Date: Jul 2018
Location: USA
Posts: 2,192

Bikes: Ti, Mn Cr Ni Mo Nb, Al, C

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 942 Post(s)
Liked 526 Times in 349 Posts
Originally Posted by TimothyH
Bold/Red is why "Gaps between gears" is a problem which is often overstated.

When a wide(er) range cassette was installed on my gravel bike I hunted for the correct gear but after a couple of weeks I got used to it. Over the next few months I got stronger, was able to push through on the gear I had and it wasn't a big deal.


-Tim-
Yep it’s a non issue for me now. When an indoor session is harder than outdoors, I see it as a good thing.
jadocs is offline  
Old 07-17-19, 11:45 AM
  #13  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,625

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,560 Times in 1,574 Posts
Originally Posted by TimothyH
Bold/Red is why "Gaps between gears" is a problem which is often overstated.

When a wide(er) range cassette was installed on my gravel bike I hunted for the correct gear but after a couple of weeks I got used to it. Over the next few months I got stronger, was able to push through on the gear I had and it wasn't a big deal.


-Tim-
I feel like riding a FG/SS takes that to an extreme. Every gear on a derailleur bike feels super-wide after I've been on my FG.
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Old 07-17-19, 01:33 PM
  #14  
TimothyH
- Soli Deo Gloria -
 
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,782

Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix

Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times in 469 Posts
Originally Posted by ThermionicScott
I feel like riding a FG/SS takes that to an extreme. Every gear on a derailleur bike feels super-wide after I've been on my FG.
Preaching to the choir...



Resistance rollers with this setup is a killer workout.


-Tim-
TimothyH is offline  
Likes For TimothyH:
Old 07-18-19, 08:47 AM
  #15  
Mr_Crankypants
Junior Member
Thread Starter
 
Join Date: Jul 2018
Posts: 20
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Whoa, fixed gear on rollers - now that is hard core. Much more hard core than I am.

I'm feeling like a bit of a weenie now for finding my lowest trainer gear (34-26 - I have an 11-26 cassette on the trainer right now) pretty brutal on some Zwift climbs. Hmm. I'm still keeping my eye out for the right used bike within my "dedicated trainer bike budget" to pop up on craigslist/ebay/nextdoor, etc etc. Most of what I've seen in my price range has had Claris or Sora, but we'll see - maybe I'll get lucky and someone will sell a Tiagra or even 105 bike for a good price.
Mr_Crankypants is offline  
Old 07-18-19, 08:50 AM
  #16  
jadocs
Senior Member
 
jadocs's Avatar
 
Join Date: Jul 2018
Location: USA
Posts: 2,192

Bikes: Ti, Mn Cr Ni Mo Nb, Al, C

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 942 Post(s)
Liked 526 Times in 349 Posts
Originally Posted by TimothyH
Preaching to the choir...



Resistance rollers with this setup is a killer workout.


-Tim-
You storing the rollers there or riding there? Need to get it away from that wall for added motivation when you start to get really tired
jadocs is offline  
Old 07-18-19, 12:40 PM
  #17  
TimothyH
- Soli Deo Gloria -
 
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,782

Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix

Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times in 469 Posts
Originally Posted by jadocs
You storing the rollers there or riding there? Need to get it away from that wall for added motivation when you start to get really tired
The wall was a crutch until I got proficient.

48x15 (84.5 GI) by the way.

When using the Sportcrafter inertia (free spinning) drum, intensity of the workout is limited by my ability to pedal at high cadence.

Wen using the Sportcrafter resistance drum, intensity is no problem. The rear sprocket sometimes has to be changed from 15 tooth to 16 tooth just to be able to maintain high enough cadence over a 1/2 hour or 1 hour session.


-Tim-

Last edited by TimothyH; 07-18-19 at 01:38 PM.
TimothyH is offline  
Likes For TimothyH:
Old 07-18-19, 07:43 PM
  #18  
Carbonfiberboy 
just another gosling
 
Carbonfiberboy's Avatar
 
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,501

Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004

Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 3872 Post(s)
Liked 1,920 Times in 1,369 Posts
I use my "good bike" on my rollers, same road bike I use for my main outdoor single. Main thing is to have the fit and saddle exactly the same. Rollers solves that right now. I like a wide range of gears on my resistance rollers, though not so wide that I have to use the granny ring on my triple. I use big/small and middle/big and everything in between. Different intervals need different gears since my rollers don't have a resistance control.
__________________
Results matter
Carbonfiberboy is offline  
Old 07-22-19, 09:13 AM
  #19  
colombo357
Senior Member
 
colombo357's Avatar
 
Join Date: Oct 2007
Location: Murica
Posts: 2,284
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 120 Post(s)
Liked 30 Times in 12 Posts
Spend the money on a smart trainer instead. A smart trainer used religiously with a good app like TrainerRoad will boost your FTP like nothing other.

You only need one gear on a smart trainer.

You also want to make sure your training body position is nearly identical to your actual riding position, as aggressive as you can get away with. Best way to do this is to use the same bike. I made the mistake of making my trainer bike too comfortable (upright) during my first year of indoor training, and was unable to deliver the same power on the road in a more aero position.
colombo357 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
VACaver
Training & Nutrition
0
12-23-13 12:39 PM
WonderMonkey
Clydesdales/Athenas (200+ lb / 91+ kg)
1
09-16-13 09:06 PM
sgrifth13
Road Cycling
0
10-19-11 07:17 PM
Yaniel
Road Cycling
25
05-25-10 10:33 AM
jinbok2
Road Cycling
1
12-07-09 11:47 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.