1983 Bianchi Rallye f/f 56cm w/Campagnolo parts $250
#1
Full Member
Thread Starter
1983 Bianchi Rallye f/f 56cm w/Campagnolo parts $250
Columbus Tretubi 56cm frame with 70mm BB Italian thread, no dings or dents, has some paint chips/flaking down rear seat stays.
Campagnolo headset, Campagnolo BB for triple and Campagnolo hubs with 27” alloy wheels are included.
Rear Blackburn rack has some deep skuffs.. I’ll toss it in Free..
$250 plus bikeflights home delivery shipping fee
#2
Senior Member
Join Date: Aug 2013
Location: San Francisco
Posts: 833
Bikes: '68 Raleigh Suberbe, '92 (German) Centurion Equipe, '85 Schwinn Peloton, 1983ish Zunow Road Racer project, '69 Squanch Super Tourer, 1980 Bianchi Super Corsa, '82 Austro-Daimler Vent Noir, '89 Miyata 914 project, 1982ish Bianchi Rallye
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 294 Post(s)
Liked 9 Times
in
9 Posts
So tempting! Any idea if brakes other than Mafac will fit?
#6
Senior Member
I was building that one up as I looked at the pic. That will make someone a versatile machine!
#7
Full Member
Thread Starter
Cleaned up the brown grease on the seat clamp area that made it look like it had rust.
#8
Senior Member
Join Date: Aug 2013
Location: San Francisco
Posts: 833
Bikes: '68 Raleigh Suberbe, '92 (German) Centurion Equipe, '85 Schwinn Peloton, 1983ish Zunow Road Racer project, '69 Squanch Super Tourer, 1980 Bianchi Super Corsa, '82 Austro-Daimler Vent Noir, '89 Miyata 914 project, 1982ish Bianchi Rallye
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 294 Post(s)
Liked 9 Times
in
9 Posts
#10
Senior Member
Join Date: Aug 2013
Location: San Francisco
Posts: 833
Bikes: '68 Raleigh Suberbe, '92 (German) Centurion Equipe, '85 Schwinn Peloton, 1983ish Zunow Road Racer project, '69 Squanch Super Tourer, 1980 Bianchi Super Corsa, '82 Austro-Daimler Vent Noir, '89 Miyata 914 project, 1982ish Bianchi Rallye
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 294 Post(s)
Liked 9 Times
in
9 Posts
#11
Full Member
Thread Starter
I can’t find any stress cracks on any of the brazings. This bike had one of those long hand pumps installed under the top tube that ended up chipping paint on the seat cluster but no cracks to brazing.
I removed the BB to inspect and found very little surface rust and dried out brown grease. Photo included:
I removed the BB to inspect and found very little surface rust and dried out brown grease. Photo included:
#12
Full Member
Thread Starter
Mafac Cantilever brakes not included. I did try some generic plastic housing cantilever brakes on the post and they fit. Post on the frame must be a standard size.
#13
Full Member
Thread Starter
Price Drop- $135 f/f only
frame & fork only.... no other parts are included, this means no headset or BB.
$135 plus shipping.
this frame has an Italian threaded 70mm wide BB. 100mm fork spacing and 126mm rear drop spacing. Yes the stock rear wheel came with a 5 cog rear but was 126mm.
Structure condition of frame is good with no cracks, dings or dents. It can really use a respray & new decals to look sharp again.
$135 plus shipping.
this frame has an Italian threaded 70mm wide BB. 100mm fork spacing and 126mm rear drop spacing. Yes the stock rear wheel came with a 5 cog rear but was 126mm.
Structure condition of frame is good with no cracks, dings or dents. It can really use a respray & new decals to look sharp again.
#14
Senior Member
Join Date: Aug 2013
Location: San Francisco
Posts: 833
Bikes: '68 Raleigh Suberbe, '92 (German) Centurion Equipe, '85 Schwinn Peloton, 1983ish Zunow Road Racer project, '69 Squanch Super Tourer, 1980 Bianchi Super Corsa, '82 Austro-Daimler Vent Noir, '89 Miyata 914 project, 1982ish Bianchi Rallye
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 294 Post(s)
Liked 9 Times
in
9 Posts
frame & fork only.... no other parts are included, this means no headset or BB.
$135 plus shipping.
this frame has an Italian threaded 70mm wide BB. 100mm fork spacing and 126mm rear drop spacing. Yes the stock rear wheel came with a 5 cog rear but was 126mm.
Structure condition of frame is good with no cracks, dings or dents. It can really use a respray & new decals to look sharp again.
$135 plus shipping.
this frame has an Italian threaded 70mm wide BB. 100mm fork spacing and 126mm rear drop spacing. Yes the stock rear wheel came with a 5 cog rear but was 126mm.
Structure condition of frame is good with no cracks, dings or dents. It can really use a respray & new decals to look sharp again.
#16
bike rider
Join Date: Feb 2005
Location: Seattle
Posts: 288
Bikes: 83 Trek 500, 2x 90s Novara Randonee, Zion 737, Specialized Rockhopper, Nishiki Colorado, Univega Specialissima
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Liked 0 Times
in
0 Posts
2nd dibs! Just saw this, kicking myself for not checking this thread earlier.
#18
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,271
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3814 Post(s)
Liked 3,345 Times
in
2,182 Posts
-----
Great item.
Thanks for posting.
Enjoyed very much seeing it.
Hope artclone makes a build thread on the project so we can all enjoy it some more!
-----
Great item.
Thanks for posting.
Enjoyed very much seeing it.
Hope artclone makes a build thread on the project so we can all enjoy it some more!
-----
#19
Senior Member
Join Date: Aug 2013
Location: San Francisco
Posts: 833
Bikes: '68 Raleigh Suberbe, '92 (German) Centurion Equipe, '85 Schwinn Peloton, 1983ish Zunow Road Racer project, '69 Squanch Super Tourer, 1980 Bianchi Super Corsa, '82 Austro-Daimler Vent Noir, '89 Miyata 914 project, 1982ish Bianchi Rallye
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 294 Post(s)
Liked 9 Times
in
9 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Chriscraft760
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
4
08-01-18 01:22 PM