Why is this sound happening in my rear wheel?
#1
Junior Member
Thread Starter
Join Date: Apr 2021
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Why is this sound happening in my rear wheel?
youtu . be/wcDseFuvZFk
youtu . be/ljoLdVD43Ec
I also noticed the chain starts moving slightly when the wheel starts slowing down.
youtu . be/ljoLdVD43Ec
I also noticed the chain starts moving slightly when the wheel starts slowing down.
#2
Senior Member
Join Date: Jul 2005
Location: Boulder County, CO
Posts: 4,393
Bikes: '80 Masi Gran Criterium, '12 Trek Madone, early '60s Frejus track
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 513 Post(s)
Liked 448 Times
in
337 Posts
Please post a valid URL. Preferably, one that links to the correct video.
#3
Junior Member
Thread Starter
Join Date: Apr 2021
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#4
Senior Member
Join Date: Feb 2020
Posts: 1,060
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 529 Post(s)
Likes: 0
Liked 255 Times
in
185 Posts
It seems like the freewheel. It seems unusual. I can't say for sure.
I would start by running oil into the freewheel, and see what happens.
Does it function 100% while riding, apart from the noise. If it does, and oil doesn't fix it, you could pull apart the freewheel and have a look, or replace the freewheel, or just ride it as is.
I would start by running oil into the freewheel, and see what happens.
Does it function 100% while riding, apart from the noise. If it does, and oil doesn't fix it, you could pull apart the freewheel and have a look, or replace the freewheel, or just ride it as is.
#5
Senior Member
Join Date: Jul 2005
Location: Boulder County, CO
Posts: 4,393
Bikes: '80 Masi Gran Criterium, '12 Trek Madone, early '60s Frejus track
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 513 Post(s)
Liked 448 Times
in
337 Posts
Is this a new freewheel? What alo said, run some light oil into the freewheel. Also remember that freewheels, freewheel cogs, and chainrings are not perfectly round, especially at lower price points. Try running a slightly looser chain just to see if that reduces noise.
#7
Junior Member
Thread Starter
Join Date: Apr 2021
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Is this a new freewheel? What alo said, run some light oil into the freewheel. Also remember that freewheels, freewheel cogs, and chainrings are not perfectly round, especially at lower price points. Try running a slightly looser chain just to see if that reduces noise.
#8
Junior Member
Thread Starter
Join Date: Apr 2021
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#10
Senior Member
Join Date: Jul 2005
Location: Boulder County, CO
Posts: 4,393
Bikes: '80 Masi Gran Criterium, '12 Trek Madone, early '60s Frejus track
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 513 Post(s)
Liked 448 Times
in
337 Posts
Explains the twitching transferred to the cranks. Cheap freewheels work fine with a spring-loaded chain tensioner like a rear derailleur, which, of course, is unnecessary with a single speed. But chain tension binds against the out-of-roundness. I worked in a shop that sold tons of these. Apparently customers knew they were getting cheap bikes so they didn't notice. Loosen the chain or get a better freewheel.
#11
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,380
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,966 Times
in
1,915 Posts
Time to take it apart & look for a bad bearing race.
__________________
-Oh Hey!
-Oh Hey!
#12
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
#13
Junior Member
Thread Starter
Join Date: Apr 2021
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#14
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,835
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 802 Post(s)
Liked 703 Times
in
376 Posts
Perfectly normal for a cheap freewheel. The bearings aren't the best quality but then they don't have to be- when you're coasting there's no load on the bearings.
Put the chain back on, make sure it's not too tight (a little variation is normal when pedaling) and ride the bike. It should quiet down as parts wear in.
Put the chain back on, make sure it's not too tight (a little variation is normal when pedaling) and ride the bike. It should quiet down as parts wear in.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
Likes For Jeff Wills:
#15
Junior Member
Join Date: Sep 2011
Location: San Juan, PR
Posts: 160
Bikes: 1980's Royce Union "fixed wheel", 1995 Trek 370, 406 -wheeled " shopper/minivelo"for running errands, SS Raleigh M60
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 58 Times
in
46 Posts
Lube the freewheel by oiling through the gap between freewheel cover and teeth ring, "run it backwards" with finger to help coating everything inside ( I would continue oiling 'til it runs from the backside gap, but you may stop when/if the sound diminishes; it will not be muted as it being a cheap frrewheel) and test. While you're at it, check the hub for grease; there is this sound like "dry" ball bearings falling onto each other and I'm not sure if it comes from the freewheel or hub.
Likes For Juan el Boricua: