Miche track crank with a 3/32 chainring?
#1
Junior Member
Thread Starter
Join Date: Mar 2007
Posts: 20
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Miche track crank with a 3/32 chainring?
Hi,
I am currently running a Miche track crank with a stock 1/8 chainring, but I have a 3/32 white industries freewheel at the rear. I was wondering if there are any potential issues/problems (compatibility/chainline etc?) with replacing the 'track' chainring with a narrower (3/32) road ring (Campy?) so I can match the freewheel and run a narrower chain.
Thanks in advance for your help.
I am currently running a Miche track crank with a stock 1/8 chainring, but I have a 3/32 white industries freewheel at the rear. I was wondering if there are any potential issues/problems (compatibility/chainline etc?) with replacing the 'track' chainring with a narrower (3/32) road ring (Campy?) so I can match the freewheel and run a narrower chain.
Thanks in advance for your help.
#4
roll'em high
Join Date: Feb 2005
Location: columbus, ohio
Posts: 2,391
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#6
aka mattio
of course, the poster could be referring to Miche cranks which use a 135 bcd. it's the very recent Miche Advanced cranks that have 144.
#8
Junior Member
Thread Starter
Join Date: Mar 2007
Posts: 20
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Anyway, thank you for reply/help, I really appreciate it.