How do I remove the headset?
#1
Senior Member
Thread Starter
Join Date: Jul 2007
Location: Toronto
Posts: 203
Bikes: The Grocery Getter.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 39 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
How do I remove the headset?
Looks like friction fit (if that’s the correct term) and Sheldon Brown says I can tap it out but it’s pretty tight and I don’t want to break anything.
Any tips? Or just tap?
#2
Senior Member
Join Date: Apr 2011
Posts: 7,063
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 4407 Post(s)
Liked 1,560 Times
in
1,023 Posts
You tap it out. I use the edge of a copper pipe, but nearly anything will work. It is an press fit, so it is going to take a few sharp wacks. Alternate sides as you go.
#3
rebmeM roineS
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,216
Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 653 Post(s)
Liked 347 Times
in
226 Posts
Less chance of damage to the lugged steel frame than an aluminum frame. You working on the blue frame?
I got a headset cup removal tool to remove cups from a steel frame a couple of years ago and it did the job.
Like this but a cheaper brand. https://www.jensonusa.com/Park-Tool-RT-1-Headset-Cup-Remover-Park-Tool-RT-1-Headset-Cup-Remover?pt_source=googleads&pt_medium=cpc&pt_campaign=shopping_us&pt_keyword=&gclid=Cj0KCQjwpcLZBRCn ARIsAMPBgF20I9YhNimMzUVZ4gW6Rfd9W372hFtGmcPZnEDZ04-QSmt9slsaBiQaAlbnEALw_wcB
I got a headset cup removal tool to remove cups from a steel frame a couple of years ago and it did the job.
Like this but a cheaper brand. https://www.jensonusa.com/Park-Tool-RT-1-Headset-Cup-Remover-Park-Tool-RT-1-Headset-Cup-Remover?pt_source=googleads&pt_medium=cpc&pt_campaign=shopping_us&pt_keyword=&gclid=Cj0KCQjwpcLZBRCn ARIsAMPBgF20I9YhNimMzUVZ4gW6Rfd9W372hFtGmcPZnEDZ04-QSmt9slsaBiQaAlbnEALw_wcB
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Last edited by JanMM; 06-26-18 at 08:20 PM.
#4
Junior Member
Join Date: Jun 2010
Location: San Diego
Posts: 108
Bikes: 84 John Howard, 85 Raleigh Kodiak, 84 Ross Mt whitney, 74 Masi, 82 Allez
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Likes: 0
Liked 7 Times
in
3 Posts
I use a 3/4" wood dowel that works fine and wont damage anything. Just keep working it back and forth. The key is having the frame stable.
#5
Senior Member
Thread Starter
Join Date: Jul 2007
Location: Toronto
Posts: 203
Bikes: The Grocery Getter.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 39 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Less chance of damage to the lugged steel frame than an aluminum frame. You working on the blue frame?
I got a headset cup removal tool last to remove cups from a steel frame a couple of years ago and it did the job.
Like this but a cheaper brand. https://www.jensonusa.com/Park-Tool-...QaAlbnEALw_wcB
I got a headset cup removal tool last to remove cups from a steel frame a couple of years ago and it did the job.
Like this but a cheaper brand. https://www.jensonusa.com/Park-Tool-...QaAlbnEALw_wcB
#6
Senior Member
Join Date: Jul 2008
Location: Minas Ithil
Posts: 9,173
Mentioned: 66 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 638 Times
in
395 Posts
You can buy a 10 foot piece of 3/4 inch electrical conduit at Lowes and make your own for less than $10. That's what I did. I don't think the guy in the video did this, but I also put in a spare bar end plug on the side that I hammer. It fits perfect.
#7
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
Headset Cup Remover.
Less than $20 if you shop around.
Less than $20 if you shop around.
#8
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,395 Times
in
2,056 Posts
If you know any carpenter or electrician you can probably get a short cutoff for free that would be tossed anyway.
#9
Senior Member
Join Date: Apr 2011
Posts: 7,063
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 4407 Post(s)
Liked 1,560 Times
in
1,023 Posts
That's a lot of work for no real benefit. Either buy the tool, or just use something simple. You don't need a splined tool to safely and easily knock a cup out.
#10
Senior Member
Join Date: Oct 2013
Location: Oahu, HI
Posts: 1,396
Bikes: 89 Paramount OS 84 Fuji Touring Series III New! 2013 Focus Izalco Ergoride
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 285 Post(s)
Likes: 0
Liked 74 Times
in
54 Posts
scott s.
.
#11
Banned
Kids these days...
before the internet outsourced problem solving .. removing initiative to think things thru logically.. for one's self..
I used a long screwdriver and lightly tapped it out going around the Insert edge from the inside out..
I used a long screwdriver and lightly tapped it out going around the Insert edge from the inside out..
#12
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,905
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,928 Times
in
2,553 Posts
Ben
#13
Senior Member
In the past I've used a screw driver, brass drift, steel rod, wood dowel, PVC pipe, copper pipe(with and without an end cap), a home made headset removal tool made out of copper pipe, and an official Park Headset Removal Tool.
The removal tool is the easiest to use, and you can hit it hard enough to get out the most stubborn cups with ease.
For the other methods, where you can only hit one side of the cup at a time, tap, tap, tap gently, working around the cup. It takes a little longer, but be as gentle and even as possible.
The removal tool is the easiest to use, and you can hit it hard enough to get out the most stubborn cups with ease.
For the other methods, where you can only hit one side of the cup at a time, tap, tap, tap gently, working around the cup. It takes a little longer, but be as gentle and even as possible.
#14
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,786
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3588 Post(s)
Liked 3,400 Times
in
1,934 Posts
#15
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
+1 I've tapped out more than a few with old screwdrivers. Take your time and it isn't a big deal. Recently I treated myself to the Park remover. The press was a lot more than I wanted to spend so I went to Home Depot and bought 1/2" threaded rod, washers and nuts. Some pipe to act as a guide. $15?
Ben
Ben
In the past I've used a screw driver, brass drift, steel rod, wood dowel, PVC pipe, copper pipe(with and without an end cap), a home made headset removal tool made out of copper pipe, and an official Park Headset Removal Tool.
The removal tool is the easiest to use, and you can hit it hard enough to get out the most stubborn cups with ease.
For the other methods, where you can only hit one side of the cup at a time, tap, tap, tap gently, working around the cup. It takes a little longer, but be as gentle and even as possible.
The removal tool is the easiest to use, and you can hit it hard enough to get out the most stubborn cups with ease.
For the other methods, where you can only hit one side of the cup at a time, tap, tap, tap gently, working around the cup. It takes a little longer, but be as gentle and even as possible.
That's me too. I used to have a crummy screwdriver that I reserved for doing jobs like that. Never damaged anything that I'm aware of. The "right" tool is definitely faster and easier.
And I chuckle when I think about how I used to compress the little fingers to slide the tool into the head tube. It's so much faster and easier to just slide it up from the wrong end.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.