Bike grease vs. marine grease
#1
Senior Member
Thread Starter
Join Date: Oct 2015
Location: San Diego, California
Posts: 4,077
Bikes: Velo Orange Piolet
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 2228 Post(s)
Liked 2,011 Times
in
972 Posts
Bike grease vs. marine grease
Does it matter much? Harbor Freight has marine grease 9 oz. for $8, which is less than half the cost of Park Tool grease (and 1/6 the cost of Phil Wood grease).
#2
Senior Member
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624
Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times
in
640 Posts
I use marine grease on my bikes now and have for some time. If I happen to get some marine grease on my hands it takes vigourous scrubbing with Sunlight brand dishwashing liquid to get it off. Sunlight is excellent at cutting other types of grease.
I figure if marine grease is good enough for stuf that'll be submerged in water then it's good enough for my bike.
Cheers
I figure if marine grease is good enough for stuf that'll be submerged in water then it's good enough for my bike.
Cheers
Likes For Miele Man:
#3
Really Old Senior Member
I used to use boat trailer bearing grease.
Then I thought, I NEVER ride in the rain.
I switched to synthetic. I think a 1lb. tub was <$10-15??? It's been awhile.
Then I thought, I NEVER ride in the rain.
I switched to synthetic. I think a 1lb. tub was <$10-15??? It's been awhile.
Likes For Bill Kapaun:
#4
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,685
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 841 Post(s)
Liked 1,066 Times
in
748 Posts
It doesn't matter much in my experience. Have used too many types to recall. I just use the cheap marine grease and no issues. Bikes are mostly low demand on greases. But even if you buy the most expensive stuff for occasional maintenance it doesn't cost much in the grand scheme of things. Also, if you have lots of free time to research you'll find that there are greases not labeled as MARINE that have just as good or better water resistance.
Last edited by Crankycrank; 05-09-20 at 03:41 PM.
Likes For Crankycrank:
#5
Senior Member
It's fine. I'd expect it to do a pretty good job of protecting bearings, and maybe run very slightly slower than greases more commonly used in the bike industry. Given the remarkable lack of real information on greases in the bike industry, I like White Lightning Crystal grease simply because it cleans off my hands easier and makes contamination more visable.
Likes For cpach:
#6
Full Member
Join Date: Jul 2010
Location: Worcester, MA, USA
Posts: 411
Bikes: Dawes Lightning DLX, 1988 Klein Performance, 1991 Peugeot Safari, 1985 Raleigh Alyeska, Carrera Phantom, 1973 Raleigh Record
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 282 Post(s)
Liked 129 Times
in
92 Posts
Speedplay recommends marine grease for my Frog pedals. They sell their own grease, too, but they don't say it's any better than generic marine grease.
Likes For RichSPK:
#7
Senior Member
Join Date: Oct 2016
Location: San Mateo,Ca.
Posts: 3,988
Bikes: TRIMMED DOWN THE HERD
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1092 Post(s)
Liked 936 Times
in
601 Posts
Have been using marine grease for some years now. Specially since I ride in the rain/wet/damp. PITA to clean but hey, I don't have to worry about water!
Likes For 2cam16:
#8
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,922
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4813 Post(s)
Liked 3,942 Times
in
2,564 Posts
A manager/mechanic for a local bike chain turned me on to marine grease years ago. Ride year 'round and have a hub or BB with less than perfect seal? Stuff so much of that stuff in the bearings that it oozes out the next few rides. Wipe carefully, being sure not to force any road grit in. Ignore for two solid winters of commuting through everything. Then clean and repack. And guess what? That hub will be pristine. Exactly the thick blue it was when you packed it except a tiny ring of black right at the bearings.
I also use it to grease threads, especially spoke threads. Years later when it is time to unscrew - never an issue.
But it isn't merely waterproof. It is nearly cleanser proof. Probably the major reason it is not popular in bike shops.
If you think about it, bike duty is child's play for the stuff. Spends 6 hours at highway speed supporting a boat. 10 minutes later, it is being sunk 4' in salt water.. Next day, sunk again, then driven on the highway soaking wet.
Ben
I also use it to grease threads, especially spoke threads. Years later when it is time to unscrew - never an issue.
But it isn't merely waterproof. It is nearly cleanser proof. Probably the major reason it is not popular in bike shops.
If you think about it, bike duty is child's play for the stuff. Spends 6 hours at highway speed supporting a boat. 10 minutes later, it is being sunk 4' in salt water.. Next day, sunk again, then driven on the highway soaking wet.
Ben
Likes For 79pmooney:
#9
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,378
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6225 Post(s)
Liked 4,228 Times
in
2,372 Posts
There’s nothing wrong with Harbor Freight for cheap tools that you might use infrequently but you wouldn’t want to depend on that tool for daily use.
On the other hand, if you convert everything over to cartridge bearings, a tube of Park lube will last 15 or 20 years. I only use the stuff now to grease threads.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#10
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,922
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4813 Post(s)
Liked 3,942 Times
in
2,564 Posts
I’d be dubious of anything that comes from Harbor Freight. Grease from Harbor Freight is a bit like tootpast from the Dollar Store. It might contain something grease...like tootpast...but it might contain things you might not want...like Coalgate tootpast.
There’s nothing wrong with Harbor Freight for cheap tools that you might use infrequently but you wouldn’t want to depend on that tool for daily use.
On the other hand, if you convert everything over to cartridge bearings, a tube of Park lube will last 15 or 20 years. I only use the stuff now to grease threads.
There’s nothing wrong with Harbor Freight for cheap tools that you might use infrequently but you wouldn’t want to depend on that tool for daily use.
On the other hand, if you convert everything over to cartridge bearings, a tube of Park lube will last 15 or 20 years. I only use the stuff now to grease threads.
#11
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,526
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 965 Times
in
629 Posts
Forget $8 for 9 ounces. Buy a 1 pound tub from the auto parts store of your choice for ~$5. I just checked O'Reilly Auto Parts, $4.99 for a 1 pound tub of marine grease. Typical home gamer a one pound tub will last a long time.
#12
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,610
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4392 Post(s)
Liked 4,029 Times
in
2,690 Posts
I’d be dubious of anything that comes from Harbor Freight. Grease from Harbor Freight is a bit like tootpast from the Dollar Store. It might contain something grease...like tootpast...but it might contain things you might not want...like Coalgate tootpast.
There’s nothing wrong with Harbor Freight for cheap tools that you might use infrequently but you wouldn’t want to depend on that tool for daily use.
On the other hand, if you convert everything over to cartridge bearings, a tube of Park lube will last 15 or 20 years. I only use the stuff now to grease threads.
There’s nothing wrong with Harbor Freight for cheap tools that you might use infrequently but you wouldn’t want to depend on that tool for daily use.
On the other hand, if you convert everything over to cartridge bearings, a tube of Park lube will last 15 or 20 years. I only use the stuff now to grease threads.
Likes For veganbikes:
#13
Senior Member
Join Date: May 2003
Location: Mountain Brook. AL
Posts: 4,002
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 303 Post(s)
Likes: 0
Liked 136 Times
in
104 Posts
8 or 16 oz of any grease in bike use is a lifetime supply. I am about 1/4th the way through an 8oz tub of white lubriplate
bought in the '70s and half way through a tube of lithium grease in a grease gun bought in the '60s. Price is thus
not relevant, 'name brand' more pertinent. Better to use an auto supply store as a source than HF.
bought in the '70s and half way through a tube of lithium grease in a grease gun bought in the '60s. Price is thus
not relevant, 'name brand' more pertinent. Better to use an auto supply store as a source than HF.
#14
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4560 Post(s)
Liked 2,803 Times
in
1,801 Posts
I've used Phil's and marine grease and they seem to be the same thing. Good but I get the impression that whatever Shimano uses in its premium grease for its better loose bearing hubs has better shear characteristics. Marine grease seems to shear more easily and bearings don't feel quite as buttery as with the grease Shimano has used in their 600 and Dura Ace hubs.
#15
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,738
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2156 Post(s)
Liked 3,417 Times
in
1,210 Posts
I actually ran a bunch of tests using different greases a number of years ago on wheelsets. (As a side note, did a similar test regimen back in the 90's on lubricants for radio control cars when I was writing test stuff for the industry, so I know how to run a test schedule). Was only interested in the run down time from a set speed to zero.
Phil won hands down.
That's what I use.
If you've ever descended with me, now you know my secret.
Phil won hands down.
That's what I use.
If you've ever descended with me, now you know my secret.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#17
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,651
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4750 Post(s)
Liked 1,536 Times
in
1,006 Posts
You mean I can stop paying $18 for a 2oz tube of Slick Honey?
But as a serious question, grease like Slick Wax is indicated as safe for O-rings and elastomers, etc.. are there some greases that aren't?
But as a serious question, grease like Slick Wax is indicated as safe for O-rings and elastomers, etc.. are there some greases that aren't?
Last edited by Sy Reene; 05-10-20 at 12:38 PM.
#18
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,852
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 2341 Post(s)
Liked 2,836 Times
in
1,546 Posts
how much grease do you need? a tube of phils will last for years and is known good quality, why bother unless you have some sort of huge high volume need?
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#19
Senior Member
Hmmmm...Nit pickers. Grease is grease. All bicycle bearings are very low speed, low load, no heat. Use any grease you want, but I just use the cheapest grease around. A tub will last for at least 2 generations.
__________________
Il faut de l'audace, encore de l'audace, toujours de l'audace
1980 3Rensho-- 1975 Raleigh Sprite 3spd
1990s Raleigh M20 MTB--2007 Windsor Hour (track)
1988 Ducati 750 F1
Il faut de l'audace, encore de l'audace, toujours de l'audace
1980 3Rensho-- 1975 Raleigh Sprite 3spd
1990s Raleigh M20 MTB--2007 Windsor Hour (track)
1988 Ducati 750 F1
Likes For San Rensho:
#20
Senior Member
Grease for low speed applications should have high base oil viscosity, unlike most greases. Motorex grease 2000 has adequate high base oil viscosity, and is surprisingly similar to shimano premium grease, - the bright yellow stuff.
#21
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,398
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2496 Post(s)
Liked 2,975 Times
in
1,687 Posts
#22
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,610
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4392 Post(s)
Liked 4,029 Times
in
2,690 Posts
I only use Krytox AZ grease with the handy applicator syringe: . Why use peasant grease? I am not grease wrestling and for that I can get a 5 gallon bucket.
#23
Senior Member
Join Date: Aug 2005
Location: Las Vegas, NV
Posts: 932
Bikes: '04 LeMond Buenos Aires, '82 Bianchi Nuova Racing, De Rosa SLX, Bridgestone MB-1, Guerciotti TSX, Torpado Aelle, LeMond Tourmalet 853, Bridgestone Radac
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 101 Post(s)
Liked 46 Times
in
36 Posts
I've paid the premium price for Phil Wood for years - a nice, compact usable container for the few times I need it. I recently bought a big tub of Lucas Red 'n Tacky for $7.
The main thing with bicycle grease is that it is present.
The main thing with bicycle grease is that it is present.
#25
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,524
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2750 Post(s)
Liked 3,406 Times
in
2,061 Posts
Yes. Generally silicone greases are recommended for elastomer applications. I typically have sil glide and molykote 55 in stock for those applications.