Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

Should You Buy a New Helmet Every 3-4 Years?

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Should You Buy a New Helmet Every 3-4 Years?

Old 12-04-19, 11:13 AM
  #1  
RandomlyWest
Member
Thread Starter
 
Join Date: Dec 2016
Posts: 28
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
Should You Buy a New Helmet Every 3-4 Years?

I just read an article that states:

"Conventional wisdom and manufacturers’ guidelines state one should get a new helmet every three to four years, even if you have not had an accident or dropped your helmet."

Do you think this is
a) a good rule to observe
b) something the bicycle industry puts out there to boost helmet sales
RandomlyWest is offline  
Old 12-04-19, 11:28 AM
  #2  
79pmooney
A Roadie Forever
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 7,439

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 97 Post(s)
Tagged: 0 Thread(s)
Quoted: 1870 Post(s)
Likes: 0
Liked 255 Times in 187 Posts
That's like telling people they should drink X glasses of water a day. The construction workers in 100 degree heat will end up in the ER and Joe Blow who does nothing in an air conditioned building will be flushing valuable electrolytes from his system.

What has that helmet seen? A lot of miles? A few drop? Ozone? Sat in the sun? Spent 10 years in a cool, dark closet?
79pmooney is offline  
Likes For 79pmooney:
Old 12-04-19, 11:43 AM
  #3  
tcs
Palmer
 
tcs's Avatar
 
Join Date: Mar 2007
Location: Parts Unknown
Posts: 6,146

Bikes: 1980 Mike Melton, 1982 Stumpjumper, 1982 Santana, 1984 Alex Moulton AM, 2008 BikeFriday tikit T-11, 2010 Dawes Briercliffe, 2017 Dahon Curl i5, 2019 Surly ½DT14

Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 663 Post(s)
Liked 149 Times in 100 Posts
I had a fella at the LBS tell me the helmet age 'rule'. I pointed out that the helmet I was holding had been manufactured eight months prior and requested a prorated price. He further explained that helmets age differently before and after they're sold.

I might have been born at night, but it wasn't last night.
tcs is offline  
Old 12-04-19, 11:45 AM
  #4  
jadocs
Senior Member
 
jadocs's Avatar
 
Join Date: Jul 2018
Location: USA
Posts: 1,188

Bikes: Litespeed T2 Disc, Fondirest P4 Carbon, Fuji Cross 2.0, Specialized Fatboy

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 493 Post(s)
Liked 183 Times in 132 Posts
Originally Posted by tcs View Post
I had a fella at the LBS tell me the helmet age 'rule'. I pointed out that the helmet I was holding had been manufactured eight months prior and requested a prorated price. He further explained that helmets age differently before and after they're sold.

I might have been born at night, but it wasn't last night.
That's funny!
jadocs is offline  
Likes For jadocs:
Old 12-04-19, 11:46 AM
  #5  
tcs
Palmer
 
tcs's Avatar
 
Join Date: Mar 2007
Location: Parts Unknown
Posts: 6,146

Bikes: 1980 Mike Melton, 1982 Stumpjumper, 1982 Santana, 1984 Alex Moulton AM, 2008 BikeFriday tikit T-11, 2010 Dawes Briercliffe, 2017 Dahon Curl i5, 2019 Surly ½DT14

Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 663 Post(s)
Liked 149 Times in 100 Posts
Ever wonder why the styrofoam that lasts thousands of years in the landfill (or wetlands) breaks down in a few years in a bike helmet?

Helmet age testing:
https://helmets.org/helmetlineraging.htm
tcs is offline  
Old 12-04-19, 12:19 PM
  #6  
livedarklions
Cyclesomatic
 
livedarklions's Avatar
 
Join Date: Jun 2018
Location: New England
Posts: 5,650

Bikes: Trek FX 3; 1994 Specialized Allez Pro; Motobecane Fantom CX; Giant OCR A1

Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2912 Post(s)
Liked 1,333 Times in 805 Posts
Originally Posted by tcs View Post
Ever wonder why the styrofoam that lasts thousands of years in the landfill (or wetlands) breaks down in a few years in a bike helmet?

Helmet age testing:
https://helmets.org/helmetlineraging.htm

That link is definitive--a 3-4 year rule is absurd.
livedarklions is offline  
Old 12-04-19, 01:23 PM
  #7  
freeranger
Senior Member
 
freeranger's Avatar
 
Join Date: Jun 2005
Location: Kentucky
Posts: 1,399

Bikes: 06 Lemond Reno, 96 GT Timberline mtn.bike

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 71 Post(s)
Liked 65 Times in 53 Posts
Definitely a sales boost. Or maybe they meant decades instead of years? (but don't think I'd have a helmet around for 30 years!)
freeranger is offline  
Old 12-04-19, 03:55 PM
  #8  
tcs
Palmer
 
tcs's Avatar
 
Join Date: Mar 2007
Location: Parts Unknown
Posts: 6,146

Bikes: 1980 Mike Melton, 1982 Stumpjumper, 1982 Santana, 1984 Alex Moulton AM, 2008 BikeFriday tikit T-11, 2010 Dawes Briercliffe, 2017 Dahon Curl i5, 2019 Surly ½DT14

Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 663 Post(s)
Liked 149 Times in 100 Posts
Originally Posted by freeranger View Post
don't think I'd have a helmet around for 30 years!)
My Bell Biker just turned 40. I dug it out and wore it on a tweed ride (admittedly the first time it's been out of the closet in years).

Note: Modern helmets are far lighter, have better ventilation, are more comfortable and can offer better protection.
tcs is offline  
Old 12-04-19, 05:07 PM
  #9  
Koyote
Senior Member
 
Join Date: Sep 2017
Posts: 1,054
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 546 Post(s)
Liked 247 Times in 146 Posts
And actual safety improvements seem to come only very occasionally… And they are difficult to prove empirically, at that. See for example the MIPS technology.
Koyote is offline  
Likes For Koyote:
Old 12-04-19, 07:27 PM
  #10  
jadocs
Senior Member
 
jadocs's Avatar
 
Join Date: Jul 2018
Location: USA
Posts: 1,188

Bikes: Litespeed T2 Disc, Fondirest P4 Carbon, Fuji Cross 2.0, Specialized Fatboy

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 493 Post(s)
Liked 183 Times in 132 Posts
Poor man’s MIPS


jadocs is offline  
Likes For jadocs:
Old 12-04-19, 07:37 PM
  #11  
bikeaddiction1
Senior Member
 
bikeaddiction1's Avatar
 
Join Date: Jan 2015
Location: Calgary Alberta
Posts: 152

Bikes: Many

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked 7 Times in 7 Posts
I had a Giro helmet that was probably 10 years old and had not been crashed and the foam started cracking all over like it was drying out. I am sure the foam does break down with age but I also think the "best before date" is likely artificially early both for increased sales, and for liability issues by the manufacturer.
bikeaddiction1 is offline  
Old 12-04-19, 07:39 PM
  #12  
wolfchild
Senior Member
 
wolfchild's Avatar
 
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 5,806

Bikes: I have 3 singlespeed/fixed gear bikes

Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 1526 Post(s)
Likes: 0
Liked 188 Times in 109 Posts
No you don't have to replace your helmet every 3-4 years. I am still using a helmet which I purchased back in 2007, that's almost 13 years....
wolfchild is offline  
Old 12-04-19, 08:01 PM
  #13  
delbiker1 
Senior Member
 
delbiker1's Avatar
 
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 1,179

Bikes: 2003 Lemond Poprad, 1991 Ochsner steel frame, 2002 Airborne Zeppelin titanium, Schwinn DBX SS aluminum, Orbea MD 40 carbon fiber

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 317 Post(s)
Liked 158 Times in 107 Posts
I am one that never bought into that idea. As stated above, why would styrofoam and plastic break down that quickly on a helmet when it takes forever in a landfill. I have a Giro, still in use, that is at least 15 years old. Other than a few scrapes and some fading, it is still in great shape.
delbiker1 is offline  
Old 12-04-19, 08:05 PM
  #14  
Sojodave
Senior Member
 
Sojodave's Avatar
 
Join Date: Apr 2015
Location: Utah
Posts: 441

Bikes: Fezzari Fore CR3 Di2

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 43 Times in 20 Posts
I tell my wife you're supposed to change your helmet every year...
Sojodave is offline  
Likes For Sojodave:
Old 12-04-19, 08:09 PM
  #15  
zjrog
Senior Member
 
Join Date: Jul 2009
Posts: 1,364

Bikes: 1986 KHS Fiero, 1989 Trek 950, 1990 Trek 7000, 1992 Trek 1400, 1998 Cannondale R200, 2010 Performance Access XCL9R

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 179 Post(s)
Liked 112 Times in 84 Posts
I crashed 8 years ago, and destroyed a 12 year old helmet in the process. As far as I'm concerned, it saved my life. Yes, I was out cold for over 5 minutes, and have some memory loss. But I'm alive... People on here certainly were split on this topic back then...
zjrog is offline  
Old 12-04-19, 08:30 PM
  #16  
DrIsotope
Non omnino gravis
 
DrIsotope's Avatar
 
Join Date: Feb 2015
Location: SoCal, USA!
Posts: 7,497

Bikes: Nekobasu, Pandicorn

Mentioned: 113 Post(s)
Tagged: 0 Thread(s)
Quoted: 4140 Post(s)
Liked 619 Times in 384 Posts
I'll be sure to update with any findings if I get a helmet to last 3-4 years. I've only been riding for five years and I'm on my third helmet.
__________________
DrIsotope is offline  
Old 12-04-19, 08:37 PM
  #17  
jon c. 
Senior Member
 
Join Date: Mar 2012
Location: Tallahassee, FL
Posts: 3,820
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1036 Post(s)
Likes: 0
Liked 90 Times in 57 Posts
I'd go with b
jon c. is offline  
Old 12-04-19, 10:41 PM
  #18  
bpcyclist
Senior Member
 
Join Date: Sep 2019
Location: Portland
Posts: 798

Bikes: 56 cm BMC SLR02 w/105

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 297 Post(s)
Liked 200 Times in 136 Posts
It's marketing.
bpcyclist is offline  
Likes For bpcyclist:
Old 12-04-19, 11:46 PM
  #19  
NoWhammies
Senior Member
 
NoWhammies's Avatar
 
Join Date: Jul 2017
Location: Vancouver, BC
Posts: 1,082

Bikes: Argon 18 Gallium, BH G7, Rocky Mountain Instinct C70

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 463 Post(s)
Liked 89 Times in 60 Posts
3-4? Nope. That's a little too often. Every 10 years? Yeah, I could be in agreement with that.
NoWhammies is offline  
Likes For NoWhammies:
Old 12-05-19, 03:52 AM
  #20  
Ghazmh
Senior Member
 
Ghazmh's Avatar
 
Join Date: Jan 2014
Location: The banks of the River Charles
Posts: 1,124

Bikes: 2019 Honey Allroads Ti, 2018 Seven Redsky XX, 2017 Trek Boon 7, 2016 Soma Smoothie, 2014 Trek 520, 2006 Gary Fisher Montare

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 334 Post(s)
Liked 58 Times in 43 Posts
I’ve found the head retention thing on my Giro helmets breaks first.
Ghazmh is offline  
Likes For Ghazmh:
Old 12-05-19, 06:09 AM
  #21  
tgenec86
Rouleur
 
tgenec86's Avatar
 
Join Date: Oct 2019
Location: Central NY
Posts: 107

Bikes: Felt FC (SRAM Red), Nashbar Carbon (SRAM Red), Felt BR2 (SRAM Red), Salsa El Mariachi 29'er - solid steel, Peugeot PX-10 1972

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 52 Post(s)
Liked 80 Times in 37 Posts
Just like anything used for safety - inspect it once in a while. If you see cracks, delamination, breakdown in the structure, throw it out. If it's only funky helmet pads, just replace them. And wash that helmet once in a while with mild detergent. I have 10yr old helmets in near perfect condition which I don't hesitate to wear.

The only cardinal rule I follow is if I find damage to a helmet or have crashed and the helmet took a hit - I destroy it before tossing it in the trash.
tgenec86 is offline  
Old 12-05-19, 06:13 AM
  #22  
mrt2you
Senior Member
 
Join Date: Mar 2010
Location: new berlin wi
Posts: 235

Bikes: trek 720 multitrack hybred, 92 trek 2300, 2010 specialized roubaix, 2014 specialized roubaix

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Likes: 0
Liked 15 Times in 12 Posts
Originally Posted by delbiker1 View Post
I am one that never bought into that idea. As stated above, why would styrofoam and plastic break down that quickly on a helmet when it takes forever in a landfill. .

because the UV rays help break down the plastic and stryofoam. there are no UV rays buried in a landfill.
do a test for yourself. take a piece of old styrofoam cooler. cover 1/2 of it so the sunlight can't hit it. them leave it out in the sun for a month or so. you will easily see damage in the exposed area over the non exposed area.

i don't replace my helmet every 3-4 years. i give my helmet a good visual inspection every month or so. once i see the plastic starting to crack, dry out i replace the helmet.i usually have to do this about the 6th or 7th year.
mrt2you is offline  
Likes For mrt2you:
Old 12-05-19, 06:22 AM
  #23  
Sy Reene
Advocatus Diaboli
 
Sy Reene's Avatar
 
Join Date: Feb 2015
Location: Wherever I am
Posts: 5,208

Bikes: Merlin Cyrene, Nashbar steel CX

Mentioned: 11 Post(s)
Tagged: 1 Thread(s)
Quoted: 2529 Post(s)
Liked 149 Times in 120 Posts
Then again.. was MIPS really around 4 years ago? Ie. spending about the same money, if you were to buy a new helmet today, would it likely be markedly safer than the one you bought 4 years ago?
Sy Reene is offline  
Old 12-05-19, 06:28 AM
  #24  
Trsnrtr
Super Moderator
 
Trsnrtr's Avatar
 
Join Date: Jun 2002
Location: Central Illinois
Posts: 17,500

Bikes: Giant Propel, Gianni Motta, Co-Motion Supremo, ICE VTX

Mentioned: 100 Post(s)
Tagged: 1 Thread(s)
Quoted: 6672 Post(s)
Liked 239 Times in 144 Posts
Originally Posted by tcs View Post
I pointed out that the helmet I was holding had been manufactured eight months prior and requested a prorated price.
I’m going to remember that tactic.
__________________
Dennis T

Save The Rim Brake
Trsnrtr is offline  
Old 12-05-19, 07:05 AM
  #25  
MoAlpha
• —
 
MoAlpha's Avatar
 
Join Date: Jun 2015
Location: Land of Pleasant Living
Posts: 3,951

Bikes: Shmikes

Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 2409 Post(s)
Liked 448 Times in 281 Posts
If you eat a healthy, non-processed, locally sourced, GMO-free diet, you should never have to replace your helmet.
MoAlpha is offline  
Likes For MoAlpha:

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information

Copyright © 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.