What has your bicycle mechanic wrecked today???
#1
Member
Thread Starter
Join Date: Jul 2013
Location: ulverstone tasmania
Posts: 37
Bikes: 1984 repco nishiki cresta
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What has your bicycle mechanic wrecked today???
Hey guys,
needed to remove the suntour freewheel from my hub and didn't have the proper 2-notch tool for the job. Thought a simple job like this could be handled by a LBS so dropped the rear wheel off and left them to it. Later that day picked up the parts and to my horror found they had taken to removing it with a hammer and punch.
Man....i could have made that mess with my own tools and saved myself the effort!! That was one nice condition original freewheel up until then.
So i was wondering, who else has trusted their bike to a "professional" only to be slightly disappointed with the results?
By the way, if anyone local reads this....it was NOT the LBS here in Ulverstone but rather from a nearby town.
needed to remove the suntour freewheel from my hub and didn't have the proper 2-notch tool for the job. Thought a simple job like this could be handled by a LBS so dropped the rear wheel off and left them to it. Later that day picked up the parts and to my horror found they had taken to removing it with a hammer and punch.
Man....i could have made that mess with my own tools and saved myself the effort!! That was one nice condition original freewheel up until then.
So i was wondering, who else has trusted their bike to a "professional" only to be slightly disappointed with the results?
By the way, if anyone local reads this....it was NOT the LBS here in Ulverstone but rather from a nearby town.
#2
Senior Member
Join Date: Sep 2012
Location: San Diego
Posts: 96
Bikes: Unknown 531 resto-mod
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What a hack job. Bummer on the freewheel.
Problem with a lot of LBS Mechs any more, is they only know how to throw a bunch of new stuff on a frame to sell. Just a kid making minimum and not caring otherwise. Time to go buy the tool yourself.
Problem with a lot of LBS Mechs any more, is they only know how to throw a bunch of new stuff on a frame to sell. Just a kid making minimum and not caring otherwise. Time to go buy the tool yourself.
#3
Stuck in the '80s.
Join Date: Nov 2012
Location: Columbus, OH
Posts: 38
Bikes: 1986 Takara Elitist, 2002 Jade AL-C (frameset), early '70s Atala Grand Prix (For Sale), 70s Frejus mod. Tour de France (resto in progress), 1971 Bob Jackson (resto in progress), 70s Speedway (ss converted), 2002 Bianchi Eros frameset
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Time to ask said LBS politely (at first, anyways) to acknowledge their destruction and replace your freewheel.
#6
Still learning
The 2 notcher is a PITA. I just chipped a corner on the notch with the tool. Need to anchor it with a bolt or QR so it doesn't pop out.
#7
Member
Thread Starter
Join Date: Jul 2013
Location: ulverstone tasmania
Posts: 37
Bikes: 1984 repco nishiki cresta
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
...and a dashing looking fellow he is too, if i do say so myself.
#8
Senior Member
Join Date: May 2010
Location: Hurricane Alley , Florida
Posts: 3,903
Bikes: Treks (USA), Schwinn Paramount, Schwinn letour,Raleigh Team Professional, Gazelle GoldLine Racing, 2 Super Mondias, Carlton Professional.
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 78 Post(s)
Liked 30 Times
in
22 Posts
I once saw a LBS mechanic drive a stuck seat post or what was left of it down into the seat tube and call it "Fixed". Terrible......
#9
Member
Thread Starter
Join Date: Jul 2013
Location: ulverstone tasmania
Posts: 37
Bikes: 1984 repco nishiki cresta
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#10
Senior Member
That's why I always work on my own bikes. No one is going to take care of your bike like you do. I've spent a lot on tools over the years, but I bet I've saved more by not going to a bike shop mechanic. I've bought new bikes before and I still take them apart and redo them when I get em home. Just don't trust them with my saftey.
__________________
Semper fi
Semper fi
#11
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
Like many, I'm my own mechanic. I do very thorough work generally. But last year, I stripped out the removal threads on the non-drive arm of a set of Sugino AS road cranks. The drive side came right off, and I failed to pay attention to the non-drive side, which had galvanically bonded itself onto the spindle, I guess. The tool backed out, taking the threads with it. Disappointing...
#12
Senior Member
Join Date: Apr 2009
Location: Detroit
Posts: 10,303
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 42 Times
in
33 Posts
Like many, I'm my own mechanic. I do very thorough work generally. But last year, I stripped out the removal threads on the non-drive arm of a set of Sugino AS road cranks. The drive side came right off, and I failed to pay attention to the non-drive side, which had galvanically bonded itself onto the spindle, I guess. The tool backed out, taking the threads with it. Disappointing...
-Don't ask me how I know that!
__________________
- Auchen
- Auchen
#13
Senior Member
Join Date: Apr 2009
Location: Detroit
Posts: 10,303
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 42 Times
in
33 Posts
I think some of the "bonehead moves" we typically ascribe to previous owners are actually the work of bike shop mechanics.
-Especially when it comes to things like inverted bearing retainers, mis-built wheels, misrouted cables, etc.
-Especially when it comes to things like inverted bearing retainers, mis-built wheels, misrouted cables, etc.
__________________
- Auchen
- Auchen
#14
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,808
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
Agreed. And in another century, when I was one of those mechanics, I was responsible for my share.
#15
Still learning
Even so-called certified bike shop mechanics won't tell you this, but it's good practice to apply a little PB-Blaster to any crank arm first, then, if you still encounter any resistance, heat it slightly before going further. (It's also good practice to remove the washer if there is one.)
-Don't ask me how I know that!
-Don't ask me how I know that!
While certain members near Hootersville have bubbling baths of OA awaiting their new finds, I spritz PB Blaster on the crank bolts, bb cups, braze on allen bolts, headset, quill, seat post, seat post bolt, and QR skewers, as soon as the bike comes off the rack. Then whenever I am ready to overhaul, everything is loosy goosy.
#16
Senior Member
Join Date: Nov 2011
Location: Rochester, NY
Posts: 1,337
Bikes: 1962 Carlton Franco-Suisse Custom,1968 Raleigh DL-1/Tourist, 1971 Holdsworth Professional, 1973 Holdsworth Mistral,1973 Raleigh Gran Sport,1974 Raleigh Grand Prix, 1993 Trek 2200 Composite, 2011 Trek 7.3FX
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 67 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
i just got my frame painted , and was in the process of rebuilding, i needed to have the headset installed , so i had a mechanic do it for me (didn't have headset press), got the bike back and the paint was all chipped around the headset, you can see where the tool slipped and hit the unicrown on my forks... that one hurt... luckily it was inconspicous enough where you don't notice the chips
#17
one life on two wheels
Join Date: Jul 2008
Location: St. Petersburg, FL
Posts: 2,552
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 18 Times
in
15 Posts
I'm not fortunate enough to have a great LBS around me....even with 6 bike shops within a 5 mile radius. One shop owner is just rude & condescending every time I go in there, probably jaded after all these years. Sadly he's the "vintage" guy in my area. Three shops are corporate & have about as much to offer me as a car dealership does. One does mainly BMX. The last hope is a decent shop that caters to the everyday cyclist, and they have great customer service, decent prices, etc... but when they tell you that a SRAM PC-870 is a 8 speed only chain, and won't work with a 6 speed freewheel "it's made for indexed 8 speed systems", I have to wonder. This is the same guy that swore up & down there is no such thing as a French threaded pedal when I brought him a TA crankset that I wanted tapped to English threads..."oh the threads must just be messed up, there's no such thing as French threaded pedals, only bottom brackets." ..."what about headsets?"..."no just bottom brackets"...sigh and this was the shop owner
#18
one life on two wheels
Join Date: Jul 2008
Location: St. Petersburg, FL
Posts: 2,552
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 18 Times
in
15 Posts
i just got my frame painted , and was in the process of rebuilding, i needed to have the headset installed , so i had a mechanic do it for me (didn't have headset press), got the bike back and the paint was all chipped around the headset, you can see where the tool slipped and hit the unicrown on my forks... that one hurt... luckily it was inconspicous enough where you don't notice the chips
#19
Senior Member
Join Date: Nov 2011
Location: Rochester, NY
Posts: 1,337
Bikes: 1962 Carlton Franco-Suisse Custom,1968 Raleigh DL-1/Tourist, 1971 Holdsworth Professional, 1973 Holdsworth Mistral,1973 Raleigh Gran Sport,1974 Raleigh Grand Prix, 1993 Trek 2200 Composite, 2011 Trek 7.3FX
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 67 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
it was powdercoated 3 months prior,, i think it was done in october, and the frame wasn't finished being built up till around march/april, so i think it had ample time to cure...
#20
Senior Member
Join Date: Apr 2005
Location: Wherever
Posts: 16,748
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 556 Post(s)
Likes: 0
Liked 132 Times
in
78 Posts
This thread is kind of making me sad. Like many other "state-of-the-country" examples I can think of.
I try to resist being nostalgic but, remember when many bike shops could really work on this old stuff without screwing it up?
But, I guess the stuff wasn't old stuff back then .....
I try to resist being nostalgic but, remember when many bike shops could really work on this old stuff without screwing it up?
But, I guess the stuff wasn't old stuff back then .....
#21
Senior Member
That's why I always work on my own bikes. No one is going to take care of your bike like you do. I've spent a lot on tools over the years, but I bet I've saved more by not going to a bike shop mechanic. I've bought new bikes before and I still take them apart and redo them when I get em home. Just don't trust them with my saftey.
SP
OC, OR
ps - and to answer the original query, I haven't wrecked anything today, thanks.
#23
Senior Member
Join Date: Apr 2005
Location: Wherever
Posts: 16,748
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 556 Post(s)
Likes: 0
Liked 132 Times
in
78 Posts
And I agree. That shop owes you a new freewheel. That thing will forever be impossible to remove now.But you'll have to tread lightly. And try to be diplomatic. The sad thing is, it won't be another Suntour freewheel. Unless the owner/manager has a line on them somehow.
#24
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
The mechanic (me) just snapped another brake cable bolt on my girlfriend's bike. For some reason, finding the right torque where the cable doesn't slip but also doesn't shear off the bolt is elusive to me.
#25
Senior Member
Agreed. And a replacement freewheel, if not a Suntour, should be commensurate with the quality of the original. I don't think the current Shimanos would qualify... more like an IRD.