1984 Trek 720 frame & fork with issues
#1
Senior Member
Thread Starter
1984 Trek 720 frame & fork with issues
Seat tube 58 c-t.
Top tube 56 c-c.
The bad: The right side seat stay is bent. Two water bottle cage bolts are broken off and frozen. Both bolts on the seat stays for mounting a rack are frozen and the allen heads are rounded. The non-drive side dropout screw is frozen and sheared off. There's surface rust inside the frame.
The good: The frame is straight, the dropouts are aligned. There are no dents, dings, kinks, or creases in the seat stay, or anywhere on the frame. Except for a short, but kinda deep scrape on the seat tube next to the upper water cage bolt. There are chips and scratches, but overall the paint is pretty nice.
$95 and shipping.
Top tube 56 c-c.
The bad: The right side seat stay is bent. Two water bottle cage bolts are broken off and frozen. Both bolts on the seat stays for mounting a rack are frozen and the allen heads are rounded. The non-drive side dropout screw is frozen and sheared off. There's surface rust inside the frame.
The good: The frame is straight, the dropouts are aligned. There are no dents, dings, kinks, or creases in the seat stay, or anywhere on the frame. Except for a short, but kinda deep scrape on the seat tube next to the upper water cage bolt. There are chips and scratches, but overall the paint is pretty nice.
$95 and shipping.
Thread
Thread Starter
Forum
Replies
Last Post
realestvin7
Classic & Vintage
11
02-20-13 11:44 AM
peugeot mongrel
Classic & Vintage
1
03-09-11 10:23 AM