Upgrading the vintage Trek
#1
Junior Member
Thread Starter
Upgrading the vintage Trek
I have a '83 Trek 620 for a side project. I plan to build it up as my commuting/light touring bicycle. I got it striped down to the frame and want to add some nicer components, but the cost of everything I want gets pretty high. I'd be spending nearly $800 after I exercise my options. Is this bike worth putting all that money into, or should get a LHT for that same money instead?
#2
Senior Member
Join Date: Aug 2011
Location: Queens NYC
Posts: 3,175
Bikes: Colnago Super, Basso Gap, Pogliaghi, Fabio Barecci, Torelli Pista, Miyata 1400A
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 316 Post(s)
Likes: 0
Liked 13 Times
in
13 Posts
Wow, $800 is a lot, especially for a commuter!
What are you looking to put on this bike? You should be able to upgrade for less I think. Do you have pics?
What are you looking to put on this bike? You should be able to upgrade for less I think. Do you have pics?
__________________
It never gets easier, you just go faster. ~ Greg LeMond
#3
Senior Member
For commuting and light touring, I'd stick with the trek. One option is to buy a bike on craigslist for the parts and then sell the frame. I have the same frame as you have, built with mostly shimano 600 7-speed parts from another bike, and I can't imagine wanting anything fancier. It's a great frame for your purpose, IMO.
#4
Junior Member
Thread Starter
Fancy stuff like Nitto parts, phil wood hubs, Schmidt dynohub, brooks. The shop where I brought it from sold it to me for $375, which is kinda expensive. But it was an impulse buy because I wasn't much knowledgeable about Treks at the time of purchase. I couldn't run fenders with the 27 inch wheels, and that wheelbuild was expensive. I plan to use it as a beater bike, so. . .it I shouldn't invest all the money in it?
Pics: https://www.flickr.com/photos/6489757...7631825013219/
Pics: https://www.flickr.com/photos/6489757...7631825013219/
#5
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,908
Bikes: Too many to list here check my signature.
Mentioned: 194 Post(s)
Tagged: 2 Thread(s)
Quoted: 2949 Post(s)
Liked 2,970 Times
in
1,515 Posts
Are you using it as commuter ot beater? Some of the members here have some pretty nice commuters.
I agree 800 sounds like alot to rebuild a midlevel bike you already own. If you really want Phil hubs look for used ones on ebay, same with the dynohub.
I agree 800 sounds like alot to rebuild a midlevel bike you already own. If you really want Phil hubs look for used ones on ebay, same with the dynohub.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#6
自転車整備士
Join Date: Apr 2012
Location: Denver, Colorado USA
Posts: 885
Bikes: '86 Moots Mountaineer, '94 Salsa Ala Carte, '94 S-Works FSR, 1983 Trek 600 & 620
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
It all comes down to this: do you like the way the Trek rides, and does it fit you comfortably?
If it does, then there's your answer... keep it, and build it up the way you want it.
Personally, I'd take the 620 over an LHT any day of the week. I have an '83 620 also, built up with an 8 speed Shimano drive train.
Old school Deore XT, friction shifting and it rides like a dream. Of course, on your frame the crown jewel is that Sugino AT crank set.
If it does, then there's your answer... keep it, and build it up the way you want it.
Personally, I'd take the 620 over an LHT any day of the week. I have an '83 620 also, built up with an 8 speed Shimano drive train.
Old school Deore XT, friction shifting and it rides like a dream. Of course, on your frame the crown jewel is that Sugino AT crank set.
#7
Senior Member
Join Date: Jul 2011
Location: San Francisco
Posts: 360
Bikes: koga miyata road gentleman, raleigh crested butte, raleigh comp 650b
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
why would you put phil stuff and a dyno hub on a beater?
#8
Senior Member
Join Date: Apr 2004
Location: SPS, Texas
Posts: 478
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I don't think $800 is particularly expensive for a commuter. Build it the way you want. And I'd put Phil stuff on a commuter in a heartbeat. That Sugino AT crankset is a keeper also. That Trek has more class than others are giving it credit for. It should ride like a dream and has all the necessary eyelets for racks fore and aft. Can you tell I like the bike?
Scott
Scott
__________________
'84 Trek 850--spinbackle-built, '85 Trek 670 Campy Nuovo Record--project, '87 Trek 560 SS/Fixed--project, '87 Specialized Stumpjumper Comp w/ Deore XT--Specialized-built, '87 Rossin Record, '03 LeMond Wayzata--commuter,
'?? TST Mtn Bike frame--project, '07 Tsunami Tandem--home-built
'84 Trek 850--spinbackle-built, '85 Trek 670 Campy Nuovo Record--project, '87 Trek 560 SS/Fixed--project, '87 Specialized Stumpjumper Comp w/ Deore XT--Specialized-built, '87 Rossin Record, '03 LeMond Wayzata--commuter,
'?? TST Mtn Bike frame--project, '07 Tsunami Tandem--home-built
#9
Senior Member
Join Date: Aug 2011
Location: Queens NYC
Posts: 3,175
Bikes: Colnago Super, Basso Gap, Pogliaghi, Fabio Barecci, Torelli Pista, Miyata 1400A
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 316 Post(s)
Likes: 0
Liked 13 Times
in
13 Posts
I don't think $800 is particularly expensive for a commuter. Build it the way you want. And I'd put Phil stuff on a commuter in a heartbeat. That Sugino AT crankset is a keeper also. That Trek has more class than others are giving it credit for. It should ride like a dream and has all the necessary eyelets for racks fore and aft. Can you tell I like the bike?
Scott
Scott
It actually looks pretty darn nice. But when somebody say's it's going to be a commuter/beater, than no, I wouldn't dump $800 into it just to lock it up to a pole or do errands. I'd actually only dump that much into a bike if it's truly something special. But hey, it's the OP's bike and he can certainly do it if he likes, but he did ask.
What part's came with the bike anyway?
__________________
It never gets easier, you just go faster. ~ Greg LeMond
#10
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,537
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1242 Post(s)
Liked 985 Times
in
635 Posts
$800 is over my limit for sure. I would probably rob the parts bin, put 700cs, dual pivot brakes, aero levers, and barcons on it.
I put aerolevers and 700c on my 1984 620. The 1984 came with canti brakes, so I did not upgrade the brakes.
Of course, I have never put $800 into a bike, including the purchase price. So I am probably the wrong guy to ask.
I put aerolevers and 700c on my 1984 620. The 1984 came with canti brakes, so I did not upgrade the brakes.
Of course, I have never put $800 into a bike, including the purchase price. So I am probably the wrong guy to ask.
#11
Senior Member
Join Date: Oct 2009
Location: Minneapolis
Posts: 2,470
Bikes: -1973 Motobecane Mirage -197? Velosolex L'Etoile -'71 Raleigh Super Course
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Commuter=/= beater. I'd submit that you want the good stuff on your commuter, because that's what you're going to be riding day in, day out. Over the course of a year, you will spend weeks in that saddle. Make sure you enjoy the ride.
#12
Senior Member
Join Date: Jul 2011
Location: San Francisco
Posts: 360
Bikes: koga miyata road gentleman, raleigh crested butte, raleigh comp 650b
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
i guess i don't consider a commuter to be equal to a beater. the op said it was going to be his beater... i don't know how a trek 620 with the parts listed could possibly be a beater. if you're commuting on it and not locking it up and leaving it then sure go ahead those are great bikes and they are worth it.
#13
Certifiable
Join Date: Jun 2009
Location: Frostbike Falls, Minnesota, USA
Posts: 124
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'd much rather have your 620 than a LHT.
#14
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,816
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1397 Post(s)
Liked 1,339 Times
in
845 Posts
My commuter is my beater -- 1970 Peugeot UO-8 w/ SunTour barcons, Sugino aero crank, Cyclone rear derailleur, Shimano Titlist front, KoolStop pads, junky Avocet saddle which needs to be replaced, period correct Pletscher mousetrap (best rear rack ever), small cylindrical Bellwether front bag (again, best ever). Total investment was maybe $100, thanks to used parts on eBay and a $10 yard sale donor bike. It has a delightful faded glory look -- those 1970 Peugeot decals were classic -- and is far more fun to ride than any bike this cheap has a right to be.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#15
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,908
Bikes: Too many to list here check my signature.
Mentioned: 194 Post(s)
Tagged: 2 Thread(s)
Quoted: 2949 Post(s)
Liked 2,970 Times
in
1,515 Posts
I have been thinking about this a bit. I don't know where the OP lives but if I was going to build a nice commuter I would go with a IGH like a Shimano Alfine and their Dyno front hub. The IGH would eliminate the need for a RD and depending on terrain the FD as well, then a chain case/guard could be fitted. I think the cost for a pair of prebuilt wheels may be less than just the fancy Phil and Schmidt dyno hubs.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Thread
Thread Starter
Forum
Replies
Last Post
Jonathan.RossWC
Singlespeed & Fixed Gear
4
08-05-12 08:06 AM
monsterpile
Commuting
17
03-08-11 07:05 PM