Aluminium Hybrid Bike From Brazil
Hi guys, my name is Giuliano and i am from Rio de Janeiro, Brazil, and I come here to share with you my hybrid.
Frame: 17" Triple Butted, conformed, mono seatstay (Same than Schwinn Super Sport) Fork: Sense Activ Alumínium, post mont invisible Weld FH: TX505 RH: MT500 cup/cone Rims Sentec Pneus Chaoyang Kestrel 700x38 (Bontrager LT2 38C Kevlar reserved for trips) Anti-pucture tape Tectire Brakes MT200 Crown SunRace NW stell 36D (Sunrace 36D 7075 coming, 100g less) Crank Mt300 175mm BB Shimano Chain KMC X12 Silver K7 SLX 10-51 RD M6100 Shifter M6100 Stem Sentec 90mm 7º (UNO advanced project same size coming 50g less) Steatpost UNO SP700 advanced project Handbar Aluminium generic (UNO advanced project coming 50g less) Saddle Sele Italia trans am ldy magnesium trails Pedals Absolute Nero alumínium assimetrical face for better turns About geometry: 1005,75 wheelbase 27,2 cm BB height from floor to center BB drop 80mm like enduro geometry. Weight: 11,64Kg Without new parts or tires... W8ing opinions! |
Why would you go 700x38c when you could go 27.5x2.00?
|
Originally Posted by hybridbkrdr
(Post 22285494)
Why would you go 700x38c when you could go 27.5x2.00?
AND.... the fork don't have clearence to 2.0 |
|
Thanks hokiefyd
In my dreams the frame will be dark purple and the fork orange copper... Maybe in the future... |
Project finished. It only remains to paint.
Frame: 17" Triple Butted, conformed, mono seatstay (Same than Schwinn Super Sport) Fork: Sense Activ Alumínium, post mont invisible Weld FH: TX505 RH: MT500 cup/cone Rims Sentec Pneus MAXXIS refuse 60TPI dualcompound 700x40c Brakes MT200 Crown Sunrace 36D 7075 Crank Mt300 175mm BB Shimano Chain KMC X12 Silver K7 SLX 10-51 RD M6100 Shifter M6100 Stem UNO advanced project 90mm 7º Steatpost UNO SP700 advanced project Handbar Aluminium UNO advanced project Saddle Sele Italia trans am ldy magnesium trails Pedals Absolute Nero alumínium assimetrical face for better turns 10.640g without pedals. |
More pics bellow:
|
|
One think i love is a very aligned frames, before i change the custom parts, i verify if all stays line up and after too. I use my smartphone camera to do this test. The frame and all the set still perfect. This bike have 3 aligned points: seatstay, seattube cut (with bandnew tires), and headtube. But only with 2 of them yu can check your bike too.
https://cimg8.ibsrv.net/gimg/bikefor...19665c06ce.jpg https://cimg6.ibsrv.net/gimg/bikefor...dfd4f9682.jpeg Second pov alignment |
In Action
49Km Roundtrip in 4 hours with waterfall shower. https://cimg3.ibsrv.net/gimg/bikefor...a6b48998aa.jpg https://cimg0.ibsrv.net/gimg/bikefor...eef5a7bbaf.jpg https://cimg5.ibsrv.net/gimg/bikefor...ba0637bf8c.jpg Whith 2017 Qick 7 cromo fork https://cimg6.ibsrv.net/gimg/bikefor...b7bda466db.jpg https://cimg7.ibsrv.net/gimg/bikefor...97719b3582.jpg |
dude, youre livin the good life :thumb:
|
Wow the scenery…I am
so jealous. My wife and I want to go visit there some time. |
https://cimg7.ibsrv.net/gimg/bikefor...2d3cd4bb04.jpg
Other Brazilian hybrid bike, this with a exclusive superligth frameset. The Sense Activ urban 700 (12Kg). Your geometry are strange, with 55mm of bb drop, and your wellbase is very long and actualy stay with 0,6111 reduction and 3.63 of top speed. |
A 1993 Caloi Aluminium SuperCross
cromo fork alloy frame 19” over steering. Shimano group original 700 rims like a Brazilian trek 7500. https://cimg3.ibsrv.net/gimg/bikefor...382929849.jpeg https://cimg0.ibsrv.net/gimg/bikefor...6fdfecf9d.jpeg Alignment test https://cimg0.ibsrv.net/gimg/bikefor...7140f97f7.jpeg About tri-cell tecnology from Caloi https://cimg5.ibsrv.net/gimg/bikefor...be8631a03.jpeg With pedals and water bottle suport |
on the subject of frame alignment -
I had a couple early 90's Cannondale road bikes - including a R800 (with 2.8 frame) One thing I noticed when riding the R800 was it was a challenge to ride with hands off the bars A frame builder checked the frame - and both frame and fork were bad / not aligned |
Originally Posted by t2p
(Post 22511677)
on the subject of frame alignment -
I had a couple early 90's Cannondale road bikes - including a R800 (with 2.8 frame) One thing I noticed when riding the R800 was it was a challenge to ride with hands off the bars A frame builder checked the frame - and both frame and fork were bad / not aligned I'm a perfectionist, maybe I have ocd. I found that by taking pictures of this rear angle of the bikes it is possible to analyze the frame alignment without the help of a professional. Using this technique, I collect photos of bikes out of alignment. The Sense Activ 2021 above was not fully aligned, I sent it in for warranty and they sent me an equally crooked one, I gave up on the model and sold it, but I had a 2020, with old geometry, identifiable because it was matte black, and it was good, but it was stolen from me (Brazil). If you want, I'll post pictures of new bikes with bad alignment, I have some. Unfortunately I lost the photo of the Gary Fisher Marlin 1994 cromoly with a slightly crooked headtube, but I have other examples (maybe this photo is in the backup of the old cell phone at my in-laws house). It's also sold. The only problem with this technique of detection through photos is that, depending on the background of the photo, it is difficult to come to a conclusion, the ideal is a light background. Sometimes I buy the bike and I can only be sure at home, but I always try to find out at the time of purchase if the alignment is good using my cell phone. PS: even crooked, it's possible to pilot without hands without realizing it, to affect that, it has to be a serious case https://cimg8.ibsrv.net/gimg/bikefor...c985c3944b.jpg https://cimg8.ibsrv.net/gimg/bikefor...ad5db13dd6.jpg I spun the wheel, changed the tires, checked the spoke alignment, and the result is always the same. When this happens, even changing the fit of the axis in the frame, a perfect result is impossible. And that way I don't like it. https://cimg4.ibsrv.net/gimg/bikefor...80aea3000.jpeg https://cimg8.ibsrv.net/gimg/bikefor...3e68984a7.jpeg https://cimg0.ibsrv.net/gimg/bikefor...d6a5be6e9.jpeg now a 15” city tour 2021 crooked https://cimg7.ibsrv.net/gimg/bikefor...f44593215.jpeg https://cimg8.ibsrv.net/gimg/bikefor...d9e5bd983.jpeg https://cimg2.ibsrv.net/gimg/bikefor...ff719aad6.jpeg |
A tire that's slightly off-center with the seat post doesn't necessarily mean the frame is tweaked or out of alignment. It may just mean that the dish of the wheel does not perfectly center the rim and tire in that specific frame, and some tweaking of the dish (with spoke tension) is required. This is not all that uncommon. I think it's fair to say that there's much more to frame alignment than rear tire alignment and I'd even say that some clever dishing of the rear wheel could hide true alignment issues with the frame.
|
Originally Posted by hokiefyd
(Post 22512058)
A tire that's slightly off-center with the seat post doesn't necessarily mean the frame is tweaked or out of alignment. It may just mean that the dish of the wheel does not perfectly center the rim and tire in that specific frame, and some tweaking of the dish (with spoke tension) is required. This is not all that uncommon. I think it's fair to say that there's much more to frame alignment than rear tire alignment and I'd even say that some clever dishing of the rear wheel could hide true alignment issues with the frame.
I spend money and time, in these two cases mentioned above, nothing worked: the center the rim and tire was verified with professional tool, the tire was changed to confirm, if was possible take the perfect photo, i would make. In my opinion, is hard to find a perfect frame than we think, here in Brazil at least. I take more than 200 photos by bike, i try anythink. Some bikes is easy, some bikes is impossible to find the alignment, for me, its results in a good conclusion about the alignment of the frame. |
Originally Posted by Dragum
(Post 22512294)
"I spun the wheel, changed the tires, checked the spoke alignment, and the result is always the same. When this happens, even changing the fit of the axis in the frame, a perfect result is impossible. And that way I don't like it."
If the tire/rim is currently aligned to the left of the seat post, then you would need to adjust the spokes to move the rim to the right. That is, tighten the drive side spoke nipples and/or loosen the non-drive side spoke nipples. It's not difficult to do, but it's also possible to really mess up how true the wheel spins, so some care must be used. You said you checked the spoke alignment, but I don't understand quite what that means. You (or a bike shop) should be able to change the dish of a wheel by a moderate amount by using spoke tension alone. Park Tool has a great video on this: |
Originally Posted by hokiefyd
(Post 22512365)
I guess it would help to understand what your goal is.
Originally Posted by hokiefyd
(Post 22512365)
Are you looking to have the tire/rim perfectly aligned with the seat post, as you look at the bike from behind?
Originally Posted by hokiefyd
(Post 22512365)
Based on the photos you've posted so far, that seems to be your measure of perfect alignment, so I'll presume this is your goal.
Originally Posted by hokiefyd
(Post 22512365)
If the tire/rim is currently aligned to the left of the seat post, then you would need to adjust the spokes to move the rim to the right.
Originally Posted by hokiefyd
(Post 22512365)
That is, tighten the drive side spoke nipples and/or loosen the non-drive side spoke nipples. It's not difficult to do, but it's also possible to really mess up how true the wheel spins, so some care must be used. You said you checked the spoke alignment, but I don't understand quite what that means. You (or a bike shop) should be able to change the dish of a wheel by a moderate amount by using spoke tension alone. Park Tool has a great video on this:
https://www.youtube.com/watch?v=FqeEBih8kx0 |
Originally Posted by Dragum
(Post 22512413)
If I try to compensate for the wheel misalignment with the frame, the wheel doesn't be ok in the parktool tool. And even trying to compensate, it's not perfect, because the problem is in the alignment of the frame, really. If looks ok after compensate, but the wheel dont't be aligned in the parktool tool, I dont like, because wasn't realy ok.
|
Actual set:
Frame: Caloi Aluminum SuperCross 19” 1993 tricell tecnology 700c Fork: Caloi SuperCross 1993 oversize quill cromoly 700c (950g) Handlebar: three heads 580mm 6261 t6 Steam: Trek Matrix 88mm reach cromoly (305g) Grips: silicon chinese democracy like esi Breakes: Shimano V-brake T4000 with T4000 levers Shifters: 3x9 Shimano M3100 SeatPost: TranzX 26.8 alloy 350mm (320g) Saddle: DDK 3166 (350g) Crank: Shimano M4050 22-30-40 175mm 27v Botom Bracket: Shimano BB-52 Chain: Shimano Hg 9v Hub: Shimano Claris 2400 32h Cassete: Shimano 11-36 9V Front Derailleur: Shimano M2000 Rear Derailleur: Shimano M3100 Rim: HJC Da-21 6061 32h Double hall Spokes: inox Tires: 2 x Bontrager Lt2 Expert kevlar (485g) 38C Pedals: Caloi plastic 1993 (320g) weight with pedals: 11,790 kg https://cimg4.ibsrv.net/gimg/bikefor...7ba7accc6.jpeg https://cimg6.ibsrv.net/gimg/bikefor...353d42439.jpeg https://cimg1.ibsrv.net/gimg/bikefor...b6b325cf0.jpeg |
Returning to 72mm bb drop with mosso m5 and below 11kg liquid weight with wellgo m20 pedals
https://cimg0.ibsrv.net/gimg/bikefor...0803cf42e.jpeg https://cimg0.ibsrv.net/gimg/bikefor...bd72d91df.jpeg https://cimg1.ibsrv.net/gimg/bikefor...20a168637.jpeg |
|
https://cimg4.ibsrv.net/gimg/bikefor...2ad9f49dd.jpeg
Front hub tx505 to m4050 Crow Sunrace to Made in BR Notable 12v Grips rubbler original Caloi to CranckBrothers Cobalt (-100g) Chain kmc x12 to Shimano XTR RD m6100 to RD m7100 SLX New k7 SLX Brakes MT200 to M6100 New weight ~10.9kg (less than previous 10.99kg) Front hub tx505 to m4050 Chainring Sunrace mx 36d to Made in BR Nottable 12v 36d Grips rubber original Caloi to CranckBrothers Cobalt (-100g) Chain kmc x12 to Shimano XTR RD m6100 to RD m7100 SLX New k7 SLX Brakes MT200 to M6100 New weight 10.86Kg. Frame: 17" Triple Butted 6061, conformed, mono seatstay (Same than Schwinn Super Sport) (1680g) Fork: Mosso M5 (445mm atc) Triple Butted 7075 with 21,5cm of steerer (785g*) Seat Clamp: (25g) Steerer spacer: 3 x 5mm Alloy (15g) Steering Box: (150g) FH: Alivio M4050 cup/cone 32h (260g*) RH: MT500 cup/cone 32h (510g) Rims: Sentec 32h X2 (1100g) Air Chamber: Pirelli 45c X2 (270g) Rim Tape: Zéfal coton X2 (40g*) Spokes: 14g stainless X64 (500g) Niples: (20g) Tires: Maxxis Refuse dual compound 700x40C X2 (1050g) Brakes: M6100 with fluid and cutted lines (605*) Rotors: Sm-RT10 160mm X2 (400g) Chainring: NW Nottable 36D 12V (60g*) Crank: Mt300 175mm (755g*) BB: Shimano MT500 (95g) Chain: XTR M9100 (245g) K7: SLX 10-51 (535g*) RD: M7100 (315g) Shifter: M6100 with panel with cable (140g) Conduit: (55g) Stem: Uno Advanced Project Super Light 90mm 6º Alloy with stell fuse (105g) Steatpost: UNO SP700 advanced project 27,2mm X 350mm (cutted) Alloy with Stell fuse (275g*) Handbar: UNO Hb-Fb12l advanced project 620mm (cutted) Alloy (235g) Saddle: Sele Italia trans am ldy magnesium trails (305g*) Grips: CrankBrothers Cobalt (70g*) Pedals: Wellgo M20 (260g*) TOTAL: 10860g About geometry: BB drop 71mm https://cimg0.ibsrv.net/gimg/bikefor...3f9a333551.png |
All times are GMT -6. The time now is 02:47 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.