Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Classic & Vintage (https://www.bikeforums.net/forumdisplay.php?f=181)
-   -   For the love of English 3 speeds... (https://www.bikeforums.net/showthread.php?t=623699)

nlerner 01-03-18 09:54 AM

Given what shows up for re-sale, it does seem that Raleigh produced far more 21" Sports models than 23"--or perhaps the 23" are far less likely to go into circulation, i.e., they're keepers?! But Raleigh could be a bit odd in its sizing: The 1948-51 Clubman only came in a 22" frame. I guess they figured that size would capture enough of the possible riding market to make it worthwhile. I suppose that keeps manufacturing costs down.

rustymetal 01-03-18 01:53 PM

2 Attachment(s)
I pulled this out of a dumpster a few months back. Its a 24" framed Robin Hood, complete with center stand.
The wheels are near perfect, the thing rides like a new bike. The only issue I had to deal with was that the chain guard was bent into the chain pretty good, most likely from its toss into the dumpster.

I was sitting across the street from the place eating my lunch when I watched a guy wheeling out several bikes from his apartment and tossed them into a dumpster on the other side of the fence.
I wheeled my truck around and pulled out this, plus a pair of cheap full suspension no name mountain bikes.
I took them all, gave the two mountain bikes to a buddy with kids. All three were in ridable condition other than a pair of flat tires on the one mountain bike.

I'll snap a few better pics once I get it cleaned up, I snapped these the night I brought them home with my cell phone.

thumpism 01-03-18 02:25 PM

Good save. I hate seeing bikes being thrown away.

browngw 01-03-18 03:50 PM

1 Attachment(s)
There ought to be a law against tossing old bikes in the bin, especially a Robin Hood!

SirMike1983 01-03-18 09:17 PM

My experience is mainly in men's frames, and is that 21 inch frames are more common than 23. When the 23 turns up, it's usually a mid-1960s or later bike (bike boom era, late 60s-mid 70s seems most common).

With the US-spec DL-1 it's the opposite: the larger 24 inch frame turns up more often than the smaller 22 inch frame. The 22 inch frame is usually a 1970s-era bike, often late 1970s.

I absolutely love the 23 inch frame on the 26 Sports wheels in terms of fit and ride.

68sd 01-04-18 05:28 AM


Originally Posted by thumpism (Post 20088220)
Good save. I hate seeing bikes being thrown away.

funny how it seems my best bikes were found after somebody decided to discard them as opposed to sell them .

BigChief 01-04-18 06:05 AM

My DL-1 research is limited to catalog scans. As far as I can tell, the 24" gents frame was the standard for many years. It's roots seem to be the Popular Model 1. When extras like the enclosed chaincase were standard, they gave it a different name and model number instead of the DL (deluxe) designation. In 1950, "Tourist model 2" By 1958, It only appears in 24" and a hockey stick guard as the Police Model 4. So far, I haven't found any reference to this bike with a 22" gents frame until the 1977 catalog. Very confusing

mirfi 01-04-18 12:42 PM

For those of us in the snowy Chesapeake area.


Raleigh Sports Classic Vintage 1974 3Speed - $40 (Pasadena)


https://baltimore.craigslist.org/bik...443668354.html

nlerner 01-04-18 01:21 PM


Originally Posted by mirfi (Post 20090033)
For those of us in the snowy Chesapeake area.


Raleigh Sports Classic Vintage 1974 3Speed - $40 (Pasadena)


https://baltimore.craigslist.org/bik...443668354.html

Hmm, kinda odd that it has a Shimano-type bell-crank on the rear hub:

https://farm5.staticflickr.com/4733/...9579a00804.jpg

clubman 01-04-18 02:00 PM

Yes and then you re-read the cleverly worded ad, 'classic' 'many original parts' 'extra wheels', TLC & cables'. It all amounts to a tragic mess.

Brinksmanship, phooeey

SquidPuppet 01-04-18 02:21 PM


Originally Posted by browngw (Post 20088386)
There ought to be a law against tossing old bikes in the bin, especially a Robin Hood!

Oh my.... that color..... :love:

arty dave 01-04-18 03:36 PM


Originally Posted by BigChief (Post 20089259)
My DL-1 research is limited to catalog scans. As far as I can tell, the 24" gents frame was the standard for many years. It's roots seem to be the Popular Model 1. When extras like the enclosed chaincase were standard, they gave it a different name and model number instead of the DL (deluxe) designation. In 1950, "Tourist model 2" By 1958, It only appears in 24" and a hockey stick guard as the Police Model 4. So far, I haven't found any reference to this bike with a 22" gents frame until the 1977 catalog. Very confusing

Interesting, thanks BC. I thought DL must have stood for 'dealer line' or something like that... should have just asked here of course :) I'd like to try the 22" DL-1 some day.
From what I can tell there seems to have been a change at some point in time from 7" cranks to 6 1/2" cranks - not just for Roadsters but more as a general thing. I wonder why this was done?

browngw 01-04-18 04:33 PM

Woe is me. You fellas did not warn me that the DL-1 has a longer axle in the AW than others like my sports. I spent the afternoon carefully inserting the innards of a 77 AW into the 77 DL1 hub and wheel only to find its too short and not spaced correctly. Both bikes are spaced at 110mm but the mudguard stays and adjusters on the DL1 take up more space. Now all I have is two piles of parts! Looks like about 15mm longer (6 1/4"?)

BigChief 01-04-18 07:10 PM

Yup, the DL-1 uses a 6 1/4" axle. It's an easy swap.
edit
Do you already have a 6 1/4 axle? If not don't worry. Easy to find on eBay. Unlike the bottom bracket spindle. That one is a bear to find. Guard it jealously!

clubman 01-04-18 07:26 PM


Originally Posted by browngw (Post 20081859)
Recently I acquired a "pail 'o parts" from a fellow collector of CCM bikes. He thought some of it might be SA. A lot of it was cones axles nuts washers etc that did not appear British. I found some definitely Sturmey Archer parts but have no idea what to do with it. The axles seem long at 6 1/4" Any help is appreciated and if someone needs a part pictured, please let me know.


Originally Posted by BigChief (Post 20090791)
Yup, the DL-1 uses a 6 1/4" axle. It's an easy swap.
edit
Do you already have a 6 1/4 axle? If not don't worry. Easy to find on eBay. Unlike the bottom bracket spindle. That one is a bear to find. Guard it jealously!

So, I think you've got the axle yes?;)

gster 01-04-18 07:47 PM


Originally Posted by nlerner (Post 20090120)
Hmm, kinda odd that it has a Shimano-type bell-crank on the rear hub:

https://farm5.staticflickr.com/4733/...9579a00804.jpg

Yeah, bit of a mess. Tall frame though.
Might be worth it for the frame and some useable parts.

gster 01-04-18 09:39 PM


Originally Posted by Velognome (Post 20084898)
Haven't been active for a while and missed the British motors back on page 599....he's my Triumph to add to the posts
https://i.imgur.com/yvYKoea.jpg

And to stay on topic, here is my 30's era Hercules 3spd clubman still sporting Dunlop tires or rather tyres
https://i.imgur.com/XZAS0jM.jpg

https://i.imgur.com/VMYIS3x.jpg

https://i.imgur.com/zJkcyxP.jpg

Both those bikes really look like they want to go somewhere.

browngw 01-04-18 10:12 PM


Originally Posted by clubman (Post 20090816)
So, I think you've got the axle yes?;)

You are right of course, I do have a longer axle. I had hoped to just slip out the whole assembly and not have to rebuild. I guess I'll be doing my first rebuild of an AW. I am amazed at how much rust were in both hubs.

BigChief 01-05-18 02:15 AM


Originally Posted by browngw (Post 20091096)
You are right of course, I do have a longer axle. I had hoped to just slip out the whole assembly and not have to rebuild. I guess I'll be doing my first rebuild of an AW. I am amazed at how much rust were in both hubs.

This is good, you're going to have fun with this. A couple of tips. There's an English guy and an American guy showing AW rebuilds on youtube. Watch both of em.
Some people use OA for rust removal. The trick is knowing how strong to make it for each application. Personally, I like to use Evapo-Rust because it works well and never wrecks anything. An overnight soak usually does it.
And...tools! You will need a cone wrench to get a good bearing adjustment. In fact, it's best to have 2 so you can do a final adjustment while the wheel is mounted on the bike. I have 2 of those little Sturmey Archer spanners, love em. Good luck!

JaccoW 01-05-18 03:16 AM

Anyone care for a Reynolds 531 3-speed?
Gazelle 'Superlicht' Reynolds 531
https://i.imgur.com/VriyCPZ.jpg

thumpism 01-05-18 08:27 AM


Originally Posted by clubman (Post 20090191)
Yes and then you re-read the cleverly worded ad, 'classic' 'many original parts' 'extra wheels', TLC & cables'. It all amounts to a tragic mess.

Brinksmanship, phooeey

Never seen a yellow one in the metal, so it might be worth it if all the metal were there. Shame the fenders are missing.
https://images.craigslist.org/00o0o_...EI_600x450.jpg

Phamilton 01-05-18 10:43 AM

2 Attachment(s)

Originally Posted by nlerner (Post 20067557)
Not an English-made 3-speed but one on the spirit that I picked up today for relatively small money: Taiwanese-made Schwinn Collegiate with Shimano rear hub (and bell crank on the non-drive side w/ coaster brake), 26 x 1 3/8" wheels, and a funky front basket. Front fork looks a bit tweaked but it tracked straight on my test ride. Finish is in quite good shape:

https://farm5.staticflickr.com/4726/...93834ed9_c.jpg[/url]

https://farm5.staticflickr.com/4642/...9c496f31_c.jpg

https://farm5.staticflickr.com/4595/...ba6d726b_c.jpg

https://farm5.staticflickr.com/4593/...9692e936_c.jpg

Nice! I have that same bike. Also 590mm wheels. Shortly after I got it a few years ago, and a psuedo-current photo (since then I've upgraded the handlebars, saddle, and installed some plastic fenders). It's an okay bike. I loved it at first, but since I started commuting it just feels heavy and slow, so it is now my backup ride.

plympton 01-05-18 11:19 AM

Hope you all made it thru the cyclone blizzard. Stay warm.

johnnyspaghetti 01-05-18 01:44 PM

Sunny & -10F south of the border. The dogs feet can only handle 2 minutes. This looks to be 50's
https://www.ebay.com/itm/Vintage-Haw...-/222780813607

johnnyspaghetti 01-05-18 01:52 PM


Originally Posted by thumpism (Post 20091454)
Never seen a yellow one in the metal, so it might be worth it if all the metal were there. Shame the fenders are missing.
https://images.craigslist.org/00o0o_...EI_600x450.jpg

Here is a yellow being sold locally in the lakes region.

https://minneapolis.craigslist.org/h...405533201.html
https://images.craigslist.org/00y0y_...wG_600x450.jpg

thumpism 01-05-18 02:21 PM


Originally Posted by johnnyspaghetti (Post 20092136)

Damn, dude, you had to go and post that, didn't you? My size, too.

johnnyspaghetti 01-05-18 06:11 PM

The James Cycle England is a new brand to me. States it won't shift, asking $250

https://images.craigslist.org/00m0m_...7_1200x900.jpg
https://images.craigslist.org/00Y0Y_...h_1200x900.jpg

gster 01-06-18 08:54 AM

2 Attachment(s)

Originally Posted by johnnyspaghetti (Post 20092666)
The James Cycle England is a new brand to me. States it won't shift, asking $250

https://images.craigslist.org/00m0m_...7_1200x900.jpg
https://images.craigslist.org/00Y0Y_...h_1200x900.jpg

More than likely a poorly adjusted hub but for $250 I'd expect a bike that works properly.
The last non shifting hub bike that I bought was $50.00. The hub had been adjusted so poorly that the sun gear was completely stripped.
Attachment 594612
Mangled sun gear

Attachment 594613
proper sun gear

BigChief 01-06-18 12:41 PM

That cable routing might have something to do with the shifting problem. Even if it was straightened out, I never liked the way Raleigh did away with the guide pulley and ran a housed cable all the way to a cable stop on the chain stay in the 70s on some of the bikes. The guide pulley system has a much nicer feel to it IMO. $250 is way too high for this one. James was yet another motorcycle/bicycle manufacturer that got snapped up by Raleigh at some point. It may be rare, but it is still just a Raleigh light roadster with budget fittings.

gster 01-06-18 12:45 PM

1 Attachment(s)

Originally Posted by johnnyspaghetti (Post 20092666)
the james cycle england is a new brand to me. States it won't shift, asking $250

https://images.craigslist.org/00m0m_...7_1200x900.jpg
https://images.craigslist.org/00y0y_...h_1200x900.jpg

Attachment 594641


All times are GMT -6. The time now is 02:35 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.