I don't even know how to pronounce SRAM. Can someone help me?
|
Originally Posted by GlennR
(Post 21007892)
A few more topic like this and you'll catch up.
|
Originally Posted by indyfabz
(Post 21007895)
I don't even know how to pronounce SRAM. Can someone help me?
|
Originally Posted by indyfabz
(Post 21007895)
I don't even know how to pronounce SRAM. Can someone help me?
|
Originally Posted by Seattle Forrest
(Post 21005775)
Shimano in the lead, fluffy clouds #2 , SRAM dead last.
Of course, one also has to look at the difference between Road and MTB groupsets, and perhaps cross. The MTB SRAM groupsets may have much greater favor. |
Originally Posted by indyfabz
(Post 21007900)
Stick with it and one day you will eventually go far.
|
Originally Posted by GlennR
(Post 21007950)
I did 72 miles today. Is that far enough?
|
Bikes hanging in my garage :
5 Sram Road 2x10 2 Sram MTB 2x10 1 Sram Road 2x11 2 singlespeeds Parts in my junk pile: 3 sets of broken Shimano road shifters assorted Shimano derailleurs |
Originally Posted by indyfabz
(Post 21007955)
Pfft. The penultimate day of my just-concluded tour in Montana and Idaho was longer than that. Ride more and post more, and one day you will achieve greatness.
|
Originally Posted by glennr
(Post 21007964)
you know there's always someone who posts more. So in reality your only competing against yourself.
|
Originally Posted by GlennR
(Post 21007892)
A few more topic like this and you'll catch up.
I was told when I signed up that once you hit 10K posts you get a free toaster ;) |
Unless it is etap I will take Shimano, at least at 105 level and up.
In mountain bikes I do like sram shifting and their high end guide brakes don't completely suck. I got tossed over the bars on a bike with XTR braking because they were so freaking grabby...and that cost me two broken ribs. You have to watch that Shimano mtb braking. |
Originally Posted by sdmc530
(Post 21008008)
LMAO....fair play!
I was told when I signed up that once you hit 10K posts you get a free toaster ;) |
I have been swapping back and forth between Shimano STI and Campagnolo Ergopower. Ergopower wins. Ultrashift.
|
If you have your important brake on the same side as your important shifter, not only does it make more sense when you're using a hand to do something else, but on Shimano you can brake and downshift with one move. That's pretty sweet.
Related to why I think Etap blows - you need both hands on the bars to use it. |
Originally Posted by Kimmo
(Post 21008311)
If you have your important brake on the same side as your important shifter, not only does it make more sense when you're using a hand to do something else, but on Shimano you can brake and downshift with one move. That's pretty sweet.
Related to why I think Etap blows - you need both hands on the bars to use it. |
Originally Posted by rjones28
(Post 21008551)
Just the FD
|
Originally Posted by Kimmo
(Post 21008828)
You need both hands if you want to shift the RD both ways...
|
Sram for me without question. I used Shimano for years but now have my two main bikes on Sram (Red and Force 10 sp.). The ergonomics of the shifters just work so much better for me. I have arthritic elbows (old injury on radial bone head) and the double tap can be done more-or-less with finger movement, without as much arm twisting of the whole arm required to shift with the Shimano brake lever. I doubt if most people have this issue, but I do. The hoods work well for me too. I do have a Shimano group on my gravel bike, but it's 9 speed with bar end shifters - which also work very well for my elbows issue. Sounds crazy, but I'd go with good Cane Creek levers and bar end shifters if I was forced to go with Shimano.
Functionality? All my and my wife's bikes (Shimano Ultegra 9 and 10 speed) work flawlessly with minimal adjustment and maintenance, so that's a wash. Oh, I also have a Campy 8 speed Record. It uses indexed 8 speed downtube shifters. I might switch to Campy 8 speed Ergos, but having one downtube bike is fun. I've never used the Campy Ergos, so can't comment on the ergonomics. Ergonomics trumps all other considerations, because IMHO, they all work very, very well. |
Originally Posted by Kimmo
(Post 21008311)
Related to why I think Etap blows - you need both hands on the bars to use it.
|
Bike component choice is not binary, despite the fact we are living in the digital age. So, I have 2 great road bikes equipped with Campagnolo components. I have a touring bike that has Shimano derailleurs and shifters only, I have a mountain bike that uses SRAM shifters, and rear derailleur(front derailleur is Shimano). I also have a beautiful older road bike with a full Mavic groupset. 5 years from now maybe we will be talking about Microshift vs FSA or maybe Rotor. I am agnostic in this debate, I simply look for stuff that works for me and my bikes
|
Originally Posted by OneIsAllYouNeed
(Post 21007960)
Bikes hanging in my garage :
5 Sram Road 2x10 2 Sram MTB 2x10 1 Sram Road 2x11 2 singlespeeds Parts in my junk pile: 3 sets of broken Shimano road shifters assorted Shimano derailleurs |
Campy Chorus!
2 bikes with 8 speed 3 with 11 My MTB (which I never use) has Deore, the POS on my trainer has Tiagra 10. |
I just rode my Sram i 9 IGH bike its in , around town the last few days..
|
Originally Posted by fietsbob
(Post 21010513)
I just rode my Sram i 9 IGH bike its in , around town the last few days..
|
All times are GMT -6. The time now is 09:48 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.