Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Road Cycling (https://www.bikeforums.net/forumdisplay.php?f=41)
-   -   Addiction 2021.3 (https://www.bikeforums.net/showthread.php?t=1233876)

ls01 09-07-21 10:27 AM


Originally Posted by datlas (Post 22218061)
I bit the bullet and bought a new groupset for the Habanero for next year. I chose Ultegra R8000 as it has a good proven track record and the cable activated shifters and brakes should be simple and easy for me to install. I went with 34/50 chainrings and would have preferred 12-28 cassette but not an option so got 11-28. Plan is to strip Habanero completely down after the holiday season and do the build over the winter. Really the only item I am unsure about is the headset. It’s a standard Cane Creek and 12 years old, never serviced but still smooth as butter. I don’t know whether to just leave it alone or ask LBS to replace bearings. Thoughts?

Service it. If it's smooth it's good.

ls01 09-07-21 10:31 AM


Originally Posted by bampilot06 (Post 22218168)
I know right.

Have to make sure the next bike is not a BB90……

won't matter unless you can get a threaded b.b. most new bb are press fit of some kind. They all have one thing in common. They all suck. Bb30, of 30, bb86 , bb90. Bb Dub of my ass. Garbage!
Threaded b.b. with bearing cups are still problematic at times but by far the best for those of us without personal mechanics.

ls01 09-07-21 10:33 AM


Originally Posted by bampilot06 (Post 22218245)
this sums up exactly how I feel. It’s so strong of a feeling, that I almost feel crippled by how much I care about my surroundings. Meanwhile 90 percent of the people today seem to only be interested in themselves.

People who get on a moving walkway at an airport and stand on it like it’s an amusement ride. Because they have a three hour lay over everyone else in the airport must have one too.

Tldr, because it most likely doesn't effect me.

ls01 09-07-21 10:36 AM


Originally Posted by LAJ (Post 22218178)
Cane Creek is live forever stuff.

If you have the normal spacer that comes with a Shimano cassette, which very well be a .6mm, then that's not the 10/11 speed one. That one is 1.8mm. If you don't have that, you have a 10 speed body.

. Now I have to tear one of mine apart. I can't remember if there's a spacer in either of mine or not....

ls01 09-07-21 10:39 AM


Originally Posted by Mojo31 (Post 22218247)
Question that came up in discussion recently - if you ride two 50 mile segments in one day (midnight to midnight, but they were broken up by a meal or two is that a century? Or, does it have to be a fairly continuous ride with breaks of shorter intervals.

Some people can ride 98 miles and claim they rode a century. Some can put on a century ride that's only 98 miles long.
I would say if you didn't change clothes, it's a century.

ls01 09-07-21 10:40 AM


Originally Posted by Mojo31 (Post 22218256)
No, it won’t. But, is there anything that will at your age?

mass transit?

ksryder 09-07-21 10:41 AM


Originally Posted by ls01 (Post 22219178)
Some people can ride 98 miles and claim they rode a century. Some can put on a century ride that's only 98 miles long.
I would say if you didn't change clothes, it's a century.

My latest amusement has been riding to increments of ALMOST a whole number, like 59.9 miles, and deliberately stopping my computer so I can show my wife the ride and infuriate her. Good times.

ls01 09-07-21 10:42 AM


Originally Posted by Mojo31 (Post 22218266)
How about the self-important middle manager who wears ear buds and talks into a phone held at arms length loud enough for the entire terminal to hear his every word.

Yeah....you gotta stop doing that...it's not cool bro...

ls01 09-07-21 10:42 AM


Originally Posted by bampilot06 (Post 22218268)
Hope.

Hope is not a plan.

indyfabz 09-07-21 11:54 AM


Originally Posted by Bah Humbug (Post 22217346)
Y'all want to know why I feel #bahhumbug all the time? I live my life trying to be as considerate as possible of everyone around me, and somehow am frequently surrounded by people who care about nothing and no one but themselves. Whether that's pushing their music on everyone, hogging the path, drafting without asking, weaving around, stopping in the middle of the grocery store aisle, or the thousand and million other things people do all the time without thinking about it. And this is why I want my moat.

+100.

Saw another grocery cart parking garage leave-behind a couple of weekends ago. The cart corral was literally about 15' away.

I wants my cabin in rural Montana. Thing is, prices have gone through the roof since the pandemic. This place sold for around $158K in 2918. Asking price today is $550K. Even if the renovations were after the last sale, that's still insane.

899 Cedars Dr, Troy, MT 59935 | MLS #22101736 | Zillow

genejockey 09-07-21 12:00 PM


Originally Posted by ls01 (Post 22219157)
won't matter unless you can get a threaded b.b. most new bb are press fit of some kind. They all have one thing in common. They all suck. Bb30, of 30, bb86 , bb90. Bb Dub of my ass. Garbage!
Threaded b.b. with bearing cups are still problematic at times but by far the best for those of us without personal mechanics.

What about the 'thread-together' sort, where the cups thread into each other rather than depending on press fit working?

indyfabz 09-07-21 12:05 PM

Cue sheets are done and copied.
Kitchen is packed.
Tonight it's laundry and fresh rubber.

Mojo31 09-07-21 12:15 PM


Originally Posted by ls01 (Post 22219185)
Hope is not a plan.

Sure it is. Just might not be one that has a high probability of success.

Eric F 09-07-21 12:18 PM


Originally Posted by ls01 (Post 22219178)
Some people can ride 98 miles and claim they rode a century. Some can put on a century ride that's only 98 miles long.
I would say if you didn't change clothes, it's a century.

That sounds like a valid qualifier to me.

Eric F 09-07-21 12:22 PM

Very impressed with the shipping speed of a package from Lordgun (Italy) - shipped Friday, delivered today. Got me some skinwall Pirelli P-Zero TLs for my Storck. I'm hoping I get the opportunity to mount them tonight.

MoAlpha 09-07-21 12:48 PM


Originally Posted by genejockey (Post 22219304)
What about the 'thread-together' sort, where the cups thread into each other rather than depending on press fit working?

...or one-piece, the ultimate brute force solution?

genejockey 09-07-21 01:06 PM


Originally Posted by indyfabz (Post 22219314)
Cue sheets are done and copied.
Kitchen is packed.
Tonight it's laundry and fresh rubber.

You realize those are single-use, right? :roflmao2:

phrantic09 09-07-21 01:49 PM


Originally Posted by ksryder (Post 22219181)
My latest amusement has been riding to increments of ALMOST a whole number, like 59.9 miles, and deliberately stopping my computer so I can show my wife the ride and infuriate her. Good times.

Everything in this post happens to me unintentionally

genejockey 09-07-21 01:58 PM


Originally Posted by phrantic09 (Post 22219447)
Everything in this post happens to me unintentionally

Yeah. "54.9 miles. Do I go around the block to bring it up to 55? Or is that cheating?"

Mojo31 09-07-21 02:25 PM


Originally Posted by ksryder (Post 22219181)
My latest amusement has been riding to increments of ALMOST a whole number, like 59.9 miles, and deliberately stopping my computer so I can show my wife the ride and infuriate her. Good times.

Why would your failure make your wife mad? Mine would just laugh.




Unless I fail to please her in some way.

ls01 09-07-21 02:28 PM


Originally Posted by big john (Post 22218409)
Because it's fun? Try something different? No cars?

But, its....dirty...

ls01 09-07-21 02:31 PM


Originally Posted by ksryder (Post 22219181)
My latest amusement has been riding to increments of ALMOST a whole number, like 59.9 miles, and deliberately stopping my computer so I can show my wife the ride and infuriate her. Good times.

Lol thats hilarious..! I like it! I just need a wife..... ugh wait......nevermind...

ls01 09-07-21 02:37 PM


Originally Posted by genejockey (Post 22219304)
What about the 'thread-together' sort, where the cups thread into each other rather than depending on press fit working?

nah, they still waller, (technical term) around in the cup and cause noises. I had aIToken on my '16 Tarmac and it made the same noises it's making now ...tick...tick tick...tick. Argh! Maddening. As a matter of fact the drive side bearing had fretted the cup of the insert to the point it fell out on disassembly. I glued it back in but the decided to use the brand new Dub bb I had instead. No change.

Velo Vol 09-07-21 02:38 PM


Originally Posted by ls01 (Post 22219178)
Some people can ride 98 miles and claim they rode a century. Some can put on a century ride that's only 98 miles long.

Even people here.

It doesn't count as a century.

Originally Posted by ksryder (Post 22219181)
My latest amusement has been riding to increments of ALMOST a whole number, like 59.9 miles, and deliberately stopping my computer so I can show my wife the ride and infuriate her. Good times.

The joke's on you.

Velo Vol 09-07-21 02:41 PM


Originally Posted by indyfabz (Post 22219298)
This place sold for around $158K in 2918. Asking price today is $550K.

B.C.? If so, that's a really good buy, given 5000 years of inflation.


All times are GMT -6. The time now is 05:09 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.