Trash Panda Works “Special Projects”
So the folks in the front office scheduled another project to run concurrently with this one so now I feel compelled to work on this rather than wait until after the holidays.
I already cleaned up the frame, installed a new HS and found a seat binder. I have some small parts on order like cables etc. I had this bar/stem combo, Kalloy hybrid style and Nitto B115, earmarked for another bike but it will go on the mystery bike instead. https://cimg2.ibsrv.net/gimg/bikefor...497892d6e.jpeg Mono planer brakes wif fresh Kool Stop blocks. https://cimg0.ibsrv.net/gimg/bikefor...9baf548f0.jpeg https://cimg4.ibsrv.net/gimg/bikefor...175e546a6.jpeg https://cimg6.ibsrv.net/gimg/bikefor...a9b79ac81.jpeg https://cimg8.ibsrv.net/gimg/bikefor...9702af6e5.jpeg |
And of course there is a snag. Who would have thought a frame built in Xxxxxx out of Xxxxxxx tubing would have an Italian thread BB shell. Of course I only have and English BB to fit the cranks I want to use.
so now I have to hunt down a 112 ISO symetrical Italian BB. https://cimg3.ibsrv.net/gimg/bikefor...f3c0509a7.jpeg I’m not sure this Centaur is going to stay on here. https://cimg1.ibsrv.net/gimg/bikefor...6febc56b2.jpeg https://cimg4.ibsrv.net/gimg/bikefor...a6bd60ba6.jpeg |
So of course 10 minutes after we move the mystery bike off the line Amazon drops off some packages including the brake cables. :bang:
Now on the line is the Red Proto to get a major reworking https://cimg6.ibsrv.net/gimg/bikefor...6a5746ec2.jpeg https://cimg8.ibsrv.net/gimg/bikefor...76f148349.jpeg https://cimg9.ibsrv.net/gimg/bikefor...7d6f69d2e.jpeg https://cimg0.ibsrv.net/gimg/bikefor...5d2475402.jpeg https://cimg2.ibsrv.net/gimg/bikefor...90e4d539b.jpeg |
I swear all of these people's spare parts or beater bikes are nicer than any bike I will ever own.
|
Welcome to the Emerald Green/British Racing Green bicycle club. ✌️ And if you really hate that Centaur, I'll take it. 😁😉
|
Originally Posted by Bianchigirll
(Post 22727775)
:popcorn
|
Originally Posted by grant40
(Post 22727779)
I swear all of these people's spare parts or beater bikes are nicer than any bike I will ever own.
I always look for deals but when I found something I wanted that I knew enough about when i started here, I didn't hesitate, got after it and got it done. Sure I paid a bit for many of them but glad I did, I have several bikes I would never find again, especially the Merz's that are each custom one of a kind. Also have plenty that were a great deal, maybe some of it evens out, or not, no matter, again I have several that can't be found for less than crazy $$$$$$ and I didn't pay crazy for any of these IMO. The other key thing IMO is the prowess that can come along with this journey, a lot of the knowledge to be had is a bargain for the often meager POA. You have to work at it too, know your limits but don't cheap out to your detriment, sometimes it is expensive but there is always something to be learned. 90% of this bike thing is really a pretty good deal especially when you consider the fitness aspect that you often can't buy for several times the cost of this deal. ;) |
Originally Posted by stardognine
(Post 22727906)
Welcome to the Emerald Green/British Racing Green bicycle club. ✌️ And if you really hate that Centaur, I'll take it. 😁😉
|
Originally Posted by grant40
(Post 22727779)
I swear all of these people's spare parts or beater bikes are nicer than any bike I will ever own.
|
Originally Posted by Bianchigirll
(Post 22728091)
Well I only buy stuff I like and right now a lot of what’s in the spares bin is from frames I sold a few years ago.
All good, BT |
Trying to hide it is a Medici built frame?
the seat and head lugs are telling. |
Originally Posted by Bianchigirll
(Post 22727774)
And of course there is a snag. Who would have thought a frame built in Xxxxxx out of Xxxxxxx tubing would have an Italian thread BB shell. Of course I only have and English BB to fit the cranks I want to use.
so now I have to hunt down a 112 ISO symetrical Italian BB. https://cimg3.ibsrv.net/gimg/bikefor...f3c0509a7.jpeg I’m not sure this Centaur is going to stay on here. https://cimg1.ibsrv.net/gimg/bikefor...6febc56b2.jpeg https://cimg4.ibsrv.net/gimg/bikefor...a6bd60ba6.jpeg What crankset will be adorning it? I can look in the stash if you wish. |
Originally Posted by jdawginsc
(Post 22728177)
What crankset will be adorning it? I can look in the stash if you wish.
thank you that would be nice of you. 1st Gen Chorus. |
Originally Posted by Bianchigirll
(Post 22728090)
It kinda a fit British Racing Green on a frame built in…..oooops.
|
Originally Posted by Bianchigirll
(Post 22728236)
thank you that would be nice of you. 1st Gen Chorus.
I am doinking around with the Ochsner build and have yet to decide whether it will get the chrome treatment from Shelbyville Polishing & Plating. But it came with a Shimano sealed bearing BB that is being replaced with the NR from my last Ochsner bike. I can send it out priority and from Bloomington, to Ft. Wayne it should be one day in transit. I tried a NR set of arms on and it has about 1/2" clearance on both arms at 170 length. 115 overall spindle length, 20mm spindle on drive side and 23mm on non-drive side. It will only take a few moments to pull it out and put in a box. Send me shipping addy and I'll get it out right away. PO closes at 3 today so it may have to wait until Monday to go out. Lemme know, smiles, MH |
Columbus pipes, Italian threaded BB shell, and built in 'Merica - **** yeah!!
Is that original paint? DD |
Originally Posted by Bianchigirll
(Post 22728236)
thank you that would be nice of you. 1st Gen Chorus.
|
Originally Posted by Oldairhead
(Post 22728332)
Wait, is this a test?
Originally Posted by Drillium Dude
(Post 22728410)
Columbus pipes, Italian threaded BB shell, and built in 'Merica - **** yeah!!
Is that original paint? DD |
Originally Posted by Bianchigirll
(Post 22728090)
British Racing Green. I’ve been trying to fit a name to this color. It kinda a fit British Racing Green on a frame built in…..oooops.
|
Originally Posted by squirtdad
(Post 22728551)
next project should be a MG Midget with spoke wheel in british racing green
If only I had an extra Harley laying around to trade. 🤔😁 |
Dark Green, Red... out to lure Sandy Claws
|
Originally Posted by repechage
(Post 22728709)
Dark Green, Red... out to lure Sandy Claws
|
Been a slow week, being back at work and all, but a few parts and some bling have been trickling in. The skewers have a metal gripper surface.
https://cimg5.ibsrv.net/gimg/bikefor...b60b9bb39.jpeg It’s interesting that these Ti single key releases came with no instructions. The last set I bought, from Speed Metal around ‘91ish, came with instructions telling you to not use the bolts to actually tighten or remove the cranks because they can stretch. So much for single key release. I didn’t weigh the collar but the bolts are 8 grams each on my kitchen scale. https://cimg6.ibsrv.net/gimg/bikefor...789216547.jpeg OH I got some yellow cork ribbon too. |
:popcorn
Looking forward to this one. ..er.. these two! |
Originally Posted by Bianchigirll
(Post 22727774)
so now I have to hunt down a 112 ISO symetrical Italian BB.
EDIT: It's 112mm from the vertical face of one side of the spindle to the vertical face of the other. It's... kinda... symetrical? One side is a mm longer than the other. I'm assuming it is ISO, as I don't think O.M.A.S. made a JIS tapered BB. |
All times are GMT -6. The time now is 08:04 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.