![]() |
Addiction 2021.4
|
Ooohhh
|
Rutro
|
|
Originally Posted by Velo Vol
(Post 22252573)
I have not
|
How does SRAM Rival eTap AXS compare to Ultegra Di2?
|
Originally Posted by Mojo31
(Post 22252605)
How does SRAM Rival eTap AXS compare to Ultegra Di2?
|
Originally Posted by WhyFi
(Post 22252603)
fify
|
Originally Posted by Mojo31
(Post 22252605)
How does SRAM Rival eTap AXS compare to Ultegra Di2?
|
|
Today marks the end of single-use plastic shopping bags (a/k/a Philadelphia tumble weeds) in Philly.
That was one odd thing I encountered during my recent tour. They were nearly impossible to get at stores. I typically don't use them a home, but they come in handy as trash bags when bike camping. To address that problem, I would try to remember to grab a produce bag whenever possible. |
Originally Posted by WhyFi
(Post 22252535)
Geez - what did lumberjacks ever do to you? :(
|
Originally Posted by rjones28
(Post 22252621)
Why quit before 40 miles?
|
Originally Posted by BillyD
(Post 22252582)
It's coming.
And by the end of this quarter this image will be perfectly seasonal. And while I'm here, what's with the threaded, Ultregra BB on the commuter? Every few weeks it develops an awful click on both power strokes. I take it apart, look at it critically, finger it amorously, lube it randomly, reassemble it, and the click is gone for a while. |
|
Originally Posted by BillyD
(Post 22252637)
I've just always hated plaid flannel. I remember as a kid when the plaid shorts fashion came around, I was like "ewww".
I'm not much for plaid flannel shirts, either, but in a jacket or vest, they've got a heft and coziness that I like. |
Originally Posted by WhyFi
(Post 22252655)
If you weren't dawdling you would have finished in under 2 hours. HTFU.
|
Hi! What's this thread about?
|
Originally Posted by datlas
(Post 22252701)
Hi! What's this thread about?
|
I got the GPS file for tomorrow's "Savage Century" ride. The amount of climbing is only 7800 feet. Not so savage after all.
My friend told me about a "Hilier than Thou" ride in NJ that is about 12000 feet of climbing for 100 miles. Must investigate.... |
I-24 traffic alert!
|
Wheels are in motion for Habanero re-build. Wheels ordered from Psimet. Tires ordered from PBK. Groupset sans chain arriving this weekend (chain is backordered).
|
Originally Posted by datlas
(Post 22252701)
Hi! What's this thread about?
|
Originally Posted by datlas
(Post 22252701)
Hi! What's this thread about?
|
Originally Posted by datlas
(Post 22252701)
Hi! What's this thread about?
|
Originally Posted by indyfabz
(Post 22252805)
Not drinking water.
|
Originally Posted by indyfabz
(Post 22252805)
Not drinking water.
|
I went back and looked through the measurements on my bikes, and decided that 2 of them needed an adjustment in bar reach. One was easy - replace a 120mm threadless, 31.8mm clamp, 6 degree stem with a 110mm threadless, 31.8mm clamp, 6 degree stem.
The other one is the Cannondale, though. It's got a threadless headset, but it's a 1" steerer and a 26mm bar. Current stem is a 130mm, 0 degree 3T Forge Ahead I got back in 1995. I thought, "Oh, I'll just get a 120mm version" Yeah, right. I have been looking for one for MONTHS, and all I ever see are 130 or longer. Or 10 degree, which I don't want. Or 25.4 clamp, which I also don't want. Oh, the pain of too many bikes. |
Originally Posted by datlas
(Post 22252808)
That's really dumb.
|
Originally Posted by sbxx1985
(Post 22252824)
Bragging about it is dumber.
|
All times are GMT -6. The time now is 07:29 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.