![]() |
2 Attachment(s)
Hi guys
Just an update on progress. 1. I removed the old tires and tubes. Cleaned and waxed the rims. The new tires should arrive tomorrow. 2. Removed the brake assemblies, cleaned and waxed them. I added the new continental kool stops pads. 3. Removed the brake levers (even though one screw just wont come out) and cables. I will wait a bit to put the bike together until I go out to a bike shop and ask how much would it be for them to cut the cable. I still cant get the rear fender off the bike. I am getting frustrated and I am adding more pictures and see what advice you can share. As soon as the fender comes off I will use dawn to wash the whole bike and be ready to put verything back together. Thanks |
That spring clip on the fender can be a bit tight. I sometimes have to pry it up with a very small screwdriver. You do need to remove the kickstand first, however.
|
Originally Posted by clubman
(Post 20019524)
That cap for the clutch spring might be hard to find short of scavenging one from another hub. I'm not sure which washer you've got a problem with, can you provide a link to an exploded view of the AW with said part?
|
So the the spring cap is the way to go. I've never seen one for sale but then again I've never looked for one.
|
It helps if you google search with the part number. In this case Sturmey Archer HSA 129 clutch spring cap. Some clutch springs are smaller than the hole in the driver and poke right through and others won't fit through and you have to push down the driver and compress the spring to screw on the cone.
|
I have a Raleigh Superbe and am in the process of getting it put back together. I repacked with 11 1/4" Bearings in each side. I went to adjust the bottom bracket and am getting binding when rotating the spindle. When adjusted with no play I'm getting a loose spindle, Im not sure if the spindle is bent or not. Does anyone have a suggestion or a spare spindle they are wanting to get rid of.
Here is the one I currently have. https://c1.staticflickr.com/5/4516/3...8e91b882_c.jpg https://c1.staticflickr.com/5/4575/3...a2efc6df_c.jpg Here is also a video of what it looks and feels like. https://www.flickr.com/gp/jameslovesyou/N636F5 |
1 Attachment(s)
Thanks [MENTION=45088]nlerner[/MENTION] , that helped me get a better reach once I removed the kickstand.
I am now waiting for the tires to get here tomorrow and start putting the bike together. I have encountered a screw on one of the brake levers that keeps turining around but wont come out, I think I damaged the thread when I tried to unscrew it because it felt very stiff and I kept aplying force. I have added a picture, any advice? |
Originally Posted by Charmlessman
(Post 20020676)
Thanks @nlerner , that helped me get a better reach once I removed the kickstand.
I am now waiting for the tires to get here tomorrow and start putting the bike together. I have encountered a screw on one of the brake levers that keeps turining around but wont come out, I think I damaged the thread when I tried to unscrew it because it felt very stiff and I kept aplying force. I have added a picture, any advice? |
Originally Posted by CasualBikerJay
(Post 20019199)
But I have some pictures on the forum, on this here thread..!
Yes, oiling with plain old 30 weight (lawnmower, sans additives) oil? I did sense the need to pause slightly during the shift. 30 weight is on the heavy side for oil. ATF works, sewing machine oil, Phil Wood Tenacious, 3 in 1 in the BLUE can not the red. FWIW I use Rotella 15W-40 in my hubs... it is what is left over after changing the oil on 3 trucks and 2 tractors. :roflmao2: The key thing, initially, is to get some lubrication in there. Eventually you are going to want to pull the hub at least partially down for a bit of cleaning and to grease the bearings. At that point you will want the grease and the oil to be compatible. I use the old cheap brown soap based grease, the oil in the hub keeps it pliable. When I was riding regularly I would put a single squirt of motor oil in the hub about once a month. You can listen to the hub and tell the difference in the sound when it needs oil vs when it doesn't. The ticking is more muted when it is properly oiled. Aaron:) |
"proper" position of SA shifter on handlebars?
I just got my feet wet, got two 1960-61 "Popular Sports", lady and gent pair.
The SA shifters are set at different locations on the handlebars - right, left, above, below. Is there a "proper", or factory position, also in relation to the ergonomics of shift lever? |
1 Attachment(s)
Originally Posted by CasualBikerJay
(Post 20021206)
I just got my feet wet, got two 1960-61 "Popular Sports", lady and gent pair.
The SA shifters are set at different locations on the handlebars - right, left, above, below. Is there a "proper", or factory position, also in relation to the ergonomics of shift lever? Attachment 590638 |
Originally Posted by jamesj
(Post 20020663)
I have a Raleigh Superbe and am in the process of getting it put back together. I repacked with 11 1/4" Bearings in each side. I went to adjust the bottom bracket and am getting binding when rotating the spindle. When adjusted with no play I'm getting a loose spindle, Im not sure if the spindle is bent or not. Does anyone have a suggestion or a spare spindle they are wanting to get rid of.
Here is the one I currently have. https://c1.staticflickr.com/5/4516/3...8e91b882_c.jpg https://c1.staticflickr.com/5/4575/3...a2efc6df_c.jpg Here is also a video of what it looks and feels like. https://www.flickr.com/gp/jameslovesyou/N636F5 One problem is that there were after market spindles made to replace the 16GC, but they have different identification numbers. So buying one sight unseen is a gamble unless it's from somebody who knows these things. Can't go wrong with a Raleigh stamped 16GC. |
Are all the bearings staying put in there proper position when tightening?
If you roll the bottom bracket axle on a piece of thick glass or a granite counter top you may see a wobble if the axle is bent. |
No look at the axle at the right side. Big Chief nailed it, it's been totally gouged/scooped out (can't remember correct term). Likely too many balls or not enough and then ridden for a long time. New axle for certain.
|
Finally got the stuck stem out of the fork - I gave it about 7 rounds of soaking, heating and spraying and then took it to the guy who corrected the curve on one of the DL-1 fork blades. He had a purpose built pipe vice in a stand that was able to clamp onto the steerer really securely. Another 3 rounds of heat/spray and a pipe wrench and it started to move. I think part of it was as the stem started to get squished it allowed some lube to get in between the steerer and stem. No damage to the steerer or fork paint, woohoo!
|
I have put the bike together, everything was looking good but when I tried to ride it the front wheel makes a weird noise. I can see the fender is rubbing the tire. If I pick up the fender the noise is gone. The back tire is OK. Tomorrow I will remove the fender and try to ride it and see if that works. Any ideas?
|
Arty Dave. I know when anything like your frustration happens to me and I'm able to resolve it I feel like I'vewon the lottery.
To those of you who have rebuilt many AW hubs I need your opinions and comments. I have just rebuilt two AW hubs,1949 and 1959 [still have 1952 waiting for spring cap]. The 1959 runs real smooth in my hand as I spin the sprocket in reverse and seems to engage nicely. But, with the 1949 although it spins freely in reverse and seems to engage correctly, the sprocket dust cap rubs [I don't know how else to describe it] within the R H ball ring. It's a uniform rub not a cross thread rub. |
Originally Posted by Charmlessman
(Post 20024662)
I have put the bike together, everything was looking good but when I tried to ride it the front wheel makes a weird noise. I can see the fender is rubbing the tire. If I pick up the fender the noise is gone. The back tire is OK. Tomorrow I will remove the fender and try to ride it and see if that works. Any ideas?
Just the sound of a tire rubbing a fender drags me down. There are an unusually large amount of nubs on the tires I bought. |
Originally Posted by Charmlessman
(Post 20024662)
I have put the bike together, everything was looking good but when I tried to ride it the front wheel makes a weird noise. I can see the fender is rubbing the tire. If I pick up the fender the noise is gone. The back tire is OK. Tomorrow I will remove the fender and try to ride it and see if that works. Any ideas?
Make sure the mudguard is ideally positioned when you tighten the securing nuts and bolts. Move the stays in and out and straighten any kinks especially if theres any distortion, and there almost always is. Sometimes you can change the arc of the mudguard if you look at it's section, pushing or pulling the outside edges with hands or non marring tools. Maybe the wheel can shift forward or back in the dropouts as well. |
Originally Posted by clubman
(Post 20024759)
Massaging fender lines is a black art ;)
Make sure the mudguard is ideally positioned when you tighten the securing nuts and bolts. Move the stays in and out and straighten any kinks especially if theres any distortion, and there almost always is. Sometimes you can change the arc of the mudguard if you look at it's section, pushing or pulling the outside edges with hands or non marring tools. Maybe the wheel can shift forward or back in the dropouts as well. I don't think removing the molding nubs would make a big difference, the fender was touching the tire to the extent of not spinning freely. |
I'm not familiar with those tires but it's not unusual to have to tweak the mudguards to get the just right fit. And yes, removing the wheels can be really tight. Just one of the idiosyncrasies of these bikes so assume that it's a problem that can be solved and try again.
|
Originally Posted by clubman
(Post 20024879)
I'm not familiar with those tires but it's not unusual to have to tweak the mudguards to get the just right fit. And yes, removing the wheels can be really tight. Just one of the idiosyncrasies of these bikes so assume that it's a problem that can be solved and try again.
|
Originally Posted by plympton
(Post 20024690)
Arty Dave. I know when anything like your frustration happens to me and I'm able to resolve it I feel like I'vewon the lottery.
To those of you who have rebuilt many AW hubs I need your opinions and comments. I have just rebuilt two AW hubs,1949 and 1959 [still have 1952 waiting for spring cap]. The 1959 runs real smooth in my hand as I spin the sprocket in reverse and seems to engage nicely. But, with the 1949 although it spins freely in reverse and seems to engage correctly, the sprocket dust cap rubs [I don't know how else to describe it] within the R H ball ring. It's a uniform rub not a cross thread rub. I've seen 2 kinds of dust cap and I have the same experience - a more flared type that doesn't rub, and a much closer fitting dust cap that makes a very light scraping noise. I guess you could put a thin washer in there if you have the space for one, some hubs do, and some hubs come with one. You could file/sand down the height of it a little. I don't think it's the closeness of the fit, I think it's the height of it - the bottom of the dust cap rubbing on the ball ring. My theory is that they're such thin metal even a small distortion will make them rub on the ball ring. That makes sense if its an older hub and the dust cap may have been pryed off with a screwdriver at some stage. I've had the rear wheel on and off my bike so many times for other issues that I'm just putting up with the rubbing for now - it's fairly quiet. But next time I have the wheel off I should check for distortion or sand a little height off the dust cover. |
Having to "adjust" the fenders and chainguard is typical for these bikes. You pretty much just have to bend them around until you get it right. I do this with the wheel on. Sometimes I can just bend the stays a bit in the middle to get it to clear the tire and sometimes I'll have to put something flat like a chisel between the tire and stay to bend it out away from the tire.
|
Originally Posted by BigChief
(Post 20025048)
Having to "adjust" the fenders and chainguard is typical for these bikes. You pretty much just have to bend them around until you get it right. I do this with the wheel on. Sometimes I can just bend the stays a bit in the middle to get it to clear the tire and sometimes I'll have to put something flat like a chisel between the tire and stay to bend it out away from the tire.
|
All times are GMT -6. The time now is 07:20 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.