From what I've read, 1959 or 60 was the last of the Birmingham built Hercs. I haven't had the chance to work on a Herc hub, but I do have another "under license" hub made by Brampton. The parts are interchangeable with SA, so I'm pretty sure you could swap the threaded driver with a circlip type if you wanted to change cogs. Pics...we wants pics!

Thanks, I will get some pics soon. I date to around 55 to 59. it is Birmingham built, Tourist model.

Unrelated, but what is the proper down angle of the North Road bars? Level to earth or what?

LC

Pricey Tourist
 

This showed up today on Kijiji, Toronto. Seller is asking $800.00.

how reasonable....800 huh?
A quick scan of what everybody else is asking will tell him maybee NOT!

I've seen some silly asking prices for roadsters too. With such a tall frame, you would think they would be a harder sell than a Sports.

It's most common to have the ends tipped down slightly, but "proper" is too strong a word. It is how I like them, but it is up to you. I find it is comfortable for my wrists in the common position.

It's probably the bike that Brigitte Bardot rode naked in the deleted scenes from 'Et dieu crea la femme', that has been sought after for decades.

A pair of my Superbes
 

'71 & '73 Raleighs all kleened and polished for the upcoming thanksgiving weekend here in Canada.
It was so beautiful outside today, I had to ride at lunch, and talked two guys from work to join me.

well.. I switchd the rims on my '73 to the original endricks with kenda rubber. I must say, I am happier with them than i was when I hung 'em on the flipper bike...not sure why though... maybe the whole CCM bike just sucked, and I blamed the Kendas!

Wow , I don't think any of my bikes have been that clean and bright even when they were brand new. Exquisite!

My new Raleigh 3 speed
 

I just pulled a Raleigh 3 speed from the trash pile and am not sure what to do with it.

I looked up the serial no. and it is a Nottingham 1978 model . The only decals say Raleigh on each side of the down tube, 20 / 30 Steel, and a decal on the top of the top tube that says made in England


I stripped it down yesterday. I was surprised to find that both the seat post and stem were easy to get out. Also the non drive (left) side crank cotter came right out. Must have been changed at some point and never tightened. I took the frame to the bike shop where we have a cotter press and the drive side cotter came out with no drama either. I will be reusing both unless I change the crank to square tapered. The brakes are side pull Weinman 730 front and 810 rear.

So now I need to decide what to do with it.

As found it was very rusty but not structurally unsound. I have cleaned off a lot of rust from the frame using navel jelly , sand paper, steel wool, Brasso , and tinfoil. The original silver paint is basically poor to dismal but the Raleigh Decals are still good as is the Green at the head and seat tubes The frame tubes are now grey semi metallic, with rust staining coming through the paint but I have succeeded in getting rid of about 75% of the original rust.

As for the wheels, both black wall tires look new or very little use with no cracking in the side walls. The rear rim was not very rusty except what was under the rim tape. I used navel jelly and a wire brush to remove almost all the corrosion. The front wheel is much worse . the exterior still feels like a cheese grater even after hitting with a wire brush . The inside under the rim tape is also corroded. I am not sure it is going to clean up very well.

So now what should I do ?


Totally stock ,
Frame as is , spray over the rust and bad paint with semi gloss clear? lube and oil , cables, brake pads . later maybe, new front wheel .

Beautify and lighten
Sand blast and repaint frame, fenders .(I can do both myself)
Aluminum handle bars ( I have a north road style bar with the ends going straight back )
Brooks seat, B17
new wheels
replace cranks and spindle with square taper , with forged alum arms and aluminum pedals.
new decals

Any other interesting possibilities?

I will definitely replace the stock drive sprocket with a bigger one to give me a low gear.

For now while I am building it I will keep the Brooks mattress seat and be on the lookout for a B17 or maybe a Springer seat.

Are the Weinman side pulls any good? Are they forged?


Jonny

You could either just repack the bearings, clean it up and leave it an almost free upright townie or, if it's fun for you, do a restore or customization. The Raleigh stem clamp is 15/16" so your alloy northroads won't fit. It wouldn't be hard to find a 22.2 quill stem for the 1" bars. Me, I like project bikes. It's fun for me rescue un-rideable wrecks and turn them into something fun and usable. There's all sorts of approaches you could take.

I bought the SA hub from England and shipped it to Jamaica where the bicycle is.

http://i1053.photobucket.com/albums/...psos2kseoh.jpg

The modified SA 3 speed hub:
- more dog pawls
- gear block added

http://i1053.photobucket.com/albums/...pstetyyg4k.jpg
http://i1053.photobucket.com/albums/...psyyn5pfhy.jpg
http://i1053.photobucket.com/albums/...psjltwf3z3.jpg
http://i1053.photobucket.com/albums/...psyp9pnfct.jpg

*Double post*

That is impressive... in a mad scientist kind of way. :lol:

What does it do?

This is awesome, I must know more

http://i.imgur.com/IbasKGsh.jpg

http://i.imgur.com/z9uhxFFh.jpg
http://i.imgur.com/sSpHiIMh.jpg
http://i.imgur.com/D3Zcgbxh.jpg

With the exception of a 16T cog (the 28T will arrive next week) all of this was with stuff that had laying around.

Going to take it for a testdrive first to see how this feels but it feels fast. :D

Moved around some of the cables and stripped them where the original braze-ons would make more sense. Looks really good to just have cables running around.
Took some fiddling around to make sure the rear derailleur didn't commit suicide. It had a tendency to dive into the spokes. :twitchy:

EDIT: Felt really good. Quite smooth most of the time and it is fun having a bit more top speed. Only thing that needs some work is the chain. I didn't shorten it yet so when I hit a bump it fell off and the bike tried to eat it.
I'll be sure to shorten it when the 28T cog arrives.
That and perhaps I need a taller stem. This one is a bit aggressive.

Maybe you could just flip the handlebars?

I owned one myself, probably a slightly younger model, a 5 speed derailleur with upright handlebars. 20 years before my dad used to have one simular to that, also a model a couple of years younger and probably called a 'trimfiets' back then, and I did the maintenance and repairs. Not much, because Gazelle were so well made back then, especially considering the low weight they are extremely durable. And fast, very low internal drag, good geometry for a high cruising speed, handlebars were a bit low for my personal preference and head tubes can't be too slack for me, but that's personal and this design had me doubting that preference.

headset washer?
 

Can some one tell me if there is supposed to be a big 1 inch washer/spacer on the headset?

the top race on my superbe has none.......just the bird light bracket and then the top nut.

IF i recall correctly the fork wasnt keyed for a washer of that type.

It just seems odd that it would together........top race........bird bracket.....top nut. The bird bracket is a bit rounded and doesnt seem to sit flush with the top rack which makes me think there is supposed to be a spacer in between there.

It is making it really tricky to get the play out of the headset and get it adjusted properly. I am wondering if the previous owner had it apart and missed a piece putting it back together.

@Utech22, why did you add more pawls?

The models without headlight brackets had washers in their place, but there's no washer otherwise. If you're having trouble adjusting, the headset, there's some other problem.

See anything familiar in this photo? Did not know their expertise extended to motorcycles.
https://upload.wikimedia.org/wikiped...lve_engine.jpg

How did you add the the gear bloc? What is the chain widthon your added gear block?

I'm guessing you had something like a Gazelle Tour de France:
http://i.imgur.com/xzuKURNh.jpg
As far as I can tell that is the sister model. Same color and everything, just different front fork and gearing.

http://i.imgur.com/TM26quqh.jpg
I replaced the original seatpost with a taller one so I have been playing with the right angle. Kind of like the look of the flipped bars but I just need it to be a bit higher and a bit more forward.

Two possible methods:
My guess is he used an old-style threaded driver (Part K507) and screwed on a derailleur.

They dog pawls gives a ticking sound, to increasing the amount increases the sound, creating a melody.

I will create a video and upload it for a better idea;

I removed the entire inner section of the block, cut the inner section that is screwed-on, to a size that is suitable for the hub and welded it to the block itself - all done at the machine shop. The reason for the to not allow the gear block to spin just as before.

Hope that you understand.

See my previous answer :thumb:

Looking forward to the video. :thumb:

So the only difference is in the sound? It doesn't give you any more points of engagement or any kind of performance improvement?