The clicking in my saddle/seatpost is finally gone!
Praise the cycling gods, my bike is once again silent.
In 2020 I started to hear a clicking sound when I would shift on the saddle or stand up. Taking the saddle and seatpost off and regreasing everything would silence the clicking for a bit. Early 2021 I bought a new Brooks c17 thinking it was my rails that were clicking. The saddle was worn anyways so it was a needed buy. That solved the clicking for a little but it returned. Mid 2021 I bought a carbon 400mm Whisky seatpost to replace my Easton 350mm seatpost thinking the issue could be that the 350mm seatpost was basically right at the limit. That resolved the clicking for a short bit, bit it returned. This year, a new seatpost clamp has finally solved the clicking. The Hope seatpost clamp was creating the click for some reason. A Wolftooth clamp is now in the bike. Its been a 3 outdoor rides and a 5 zwift rides and there is no sound. Simple silence is incredible. I should have just replaced everything at once. I wear ear buds on all solo rides so the clicking was largely muted which is why I slowly figured out the issue. https://cimg8.ibsrv.net/gimg/bikefor...9f8e587ed8.jpg |
There's a lot to be said for a quiet ride. Congrats!
|
Clicking, ticking, squeaking and creaking is the worst.
|
Hope seatpost collars have that aluminum bolt that does not like to be over-torqued or it will break. I broke 2 of them! I had a recurrent ticking sound with my 350mm Ritchey Flexlogic 27.2 post in a sleeved titanium frame. I now have a titanium bolt in the Hope collar (with the standard aluminum teardrop shaped nut) and a U.S.E. Delrin sleeve and everything is quiet and has stayed quiet for 2 years. My post is at the limit line BTW.
|
Prolly not directly same region of issue, but I have a Spec CF post which specifically states/requires the seatrail holder cups to be lubricated where they contact the post...
I currently use a silicone all-purpose lub. It works for a time, 3 mos., this bike ridden 2x a week; then the 'clicking' returns as the lub loses effectiveness. Anyone have same issue? What lube do you use? How long before clicking returns? Ride On Yuri |
Everyone, at one time or another, has had an annoying click, tick or squeak that seemed impossible to find.
The funniest one was my most recent annoying squeak on a newly built gravel bike. I was chasing everything, seat, seat post, bars, cables, etc. Finally, when riding on a dirt road, I laid my hand on top of my helmet in frustration at the noise, and the noise stopped. Turns out that the fit band in my helmet, at a certain tension, will squeak when I wear a certain cycling cap. |
It's back.
Ugh. |
I don't want to insult you by asking if you've gone over everything in the area with the proper torque specs. Something coming loose over time methinks. I went through an similar issue that I tracked down to my B17's tension bolt.
|
Originally Posted by mstateglfr
(Post 22673890)
It's back.
Ugh. |
All times are GMT -6. The time now is 09:42 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.