Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Classic & Vintage (https://www.bikeforums.net/forumdisplay.php?f=181)
-   -   For the love of English 3 speeds... (https://www.bikeforums.net/showthread.php?t=623699)

BigChief 11-16-17 08:36 AM


Originally Posted by johnnyspaghetti (Post 19996393)
The bike is actually a Raleigh Sports & is essentually the same as a Herc. I mis read the hub stating it was 62'. it is actually a 64'. Oddly I did have my eyes examined for a Tuesday appt. The fender cleaned up well but my pin striping attempt is not the greatest. The phone pic sucks. I'll repaint the white tail.

You're doing pin striping? I had a chance to play with a Beugler pinstriper a while back and loved it. I think half the reason I want to do a total restore is to have an excuse to buy one.

johnnyspaghetti 11-16-17 09:21 AM


Originally Posted by BigChief (Post 19996699)
You're doing pin striping? I had a chance to play with a Beugler pinstriper a while back and loved it. I think half the reason I want to do a total restore is to have an excuse to buy one.

I did the mudguard pictured but this is the first time & may be good enough for now. I used a Testors paint pen & shadow the old stripe using vinyl elec. tape had a better edge as a guide or hook the tip on the tape edge. I am not pretending to be a pinstriper. I did practice on a fender prior tried out some different paint pens. Paint flow needs to be managed.
This one is pretty good about $5
https://mail.google.com/mail/?ui=2&i...4160-local1&zw

plympton 11-16-17 01:03 PM

I have one of those computers that can't spell so please forgive the type o's.

Salubrious 11-16-17 01:52 PM

I'm type AB+ myself.

BigChief 11-16-17 04:26 PM


Originally Posted by johnnyspaghetti (Post 19996801)
I did the mudguard pictured but this is the first time & may be good enough for now. I used a Testors paint pen & shadow the old stripe using vinyl elec. tape had a better edge as a guide or hook the tip on the tape edge. I am not pretending to be a pinstriper. I did practice on a fender prior tried out some different paint pens. Paint flow needs to be managed.
This one is pretty good about $5
https://mail.google.com/mail/?ui=2&i...4160-local1&zw

Don't know if you're familiar with these, but I've been wanting one for a long time. They're pretty easy to use and do a slick job.


johnnyspaghetti 11-16-17 08:20 PM


Originally Posted by BigChief (Post 19997822)
Don't know if you're familiar with these, but I've been wanting one for a long time. They're pretty easy to use and do a slick job.

https://www.youtube.com/watch?v=tXXFzhszDf0

Looks like easy professional results with a little practice. I have seen a devise similar and observed guys that do it by hand. 1 for the tool bucket list.

SirMike1983 11-16-17 09:54 PM

A Bikesmith English pin with standard rather than Raleigh cut works with the Yellow Jersey spindle and stock Raleigh cranks. The Raleigh cut sink in too deeply, but standard cut works.

BigChief 11-16-17 11:17 PM


Originally Posted by SirMike1983 (Post 19998301)
A Bikesmith English pin with standard rather than Raleigh cut works with the Yellow Jersey spindle and stock Raleigh cranks. The Raleigh cut sink in too deeply, but standard cut works.

Glad you got the BB sorted. Beautiful roadster. Also good to know there's a work a round to the scarcity of 08GC spindles.

johnnyspaghetti 11-17-17 05:23 PM

This 67' Sprite Dropped the price from $250 to $150
https://minneapolis.craigslist.org/w...327230948.html

https://images.craigslist.org/00F0F_...20_600x450.jpg

Charmlessman 11-18-17 12:02 AM

Getting my sports tomorrow
 
I am finally driving to pick up my raleigh sports tomorrow. Can't wait to ride it. Already looking for YouTube videos about cleaning it.

BigChief 11-18-17 06:32 AM


Originally Posted by Charmlessman (Post 20000388)
I am finally driving to pick up my raleigh sports tomorrow. Can't wait to ride it. Already looking for YouTube videos about cleaning it.

That's great. Beautiful bike. Don't judge it by the way it rides at first. There's a good chance that it hasn't seen proper servicing in many years. I can see that it has old, maybe original brake pads that will be hard and work very poorly. You will be amazed at what a difference a set of salmon Kool Stops will make. The cables might be dry or rusty making them feel sticky .The bottom bracket, head set and wheel bearings will likely have old dried up grease in them making the bike feel stiff and not roll and pedal as smoothly as it should. The shifter and cable might be sticky and out of adjustment. Don't worry if there's problems shifting. Those AW hubs are pretty indestructible and problems are usually just cable adjustments. Just keep in mind that she's almost 50 years old, but getting these old timers running like new is something we do all the time.

gster 11-18-17 12:03 PM

Red Raleigh
 
4 Attachment(s)
Another local Toronto bike for sale. $180.00 asking.
Not sure of the year or model but does have the eye stamping on the heron (pre 1961), a dynohub and those proprietary calipers and cables.
Interesting paint scheme.
Attachment 589329

Attachment 589330

Attachment 589331

Attachment 589332

clubman 11-18-17 12:05 PM

Pretty sure it's a 61' Superbe. Singular paint job to that year.

Maybe, the forks usually have painted or chrome sox. 59-60?

johnnyspaghetti 11-18-17 12:28 PM


Originally Posted by clubman (Post 20000957)
Pretty sure it's a 61' Superbe. Singular paint job to that year.

Maybe, the forks usually have painted or chrome sox. 59-60?

That one has all the candy of a Superbe and the paint highlights of the 61' in amazing condition.

dweenk 11-18-17 01:04 PM

Camel Back Sports
 
3 Attachment(s)
I rescued this one a while back. It has been cleaned up, but the rims are rough (as in flaking chrome, after an OA bath). The frame has "patina". I was going to make it a scorcher for someone smaller than me, but no one in the family is interested. I think it will go on CL in the spring.

gster 11-18-17 04:18 PM


Originally Posted by dweenk (Post 20001066)
I rescued this one a while back. It has been cleaned up, but the rims are rough (as in flaking chrome, after an OA bath). The frame has "patina". I was going to make it a scorcher for someone smaller than me, but no one in the family is interested. I think it will go on CL in the spring.

I like to see bikes in this early stage of assembly.
Keep the photos coming, please.

clubman 11-18-17 04:40 PM

You don't see a lot of those 19" camelback frames. Interesting that it has Superbe stlye braze-ons for the chainguard. Never seen that before.

BigChief 11-18-17 06:42 PM


Originally Posted by dweenk (Post 20001066)
I rescued this one a while back. It has been cleaned up, but the rims are rough (as in flaking chrome, after an OA bath). The frame has "patina". I was going to make it a scorcher for someone smaller than me, but no one in the family is interested. I think it will go on CL in the spring.

Although...You could find an alloy stem with more forward reach and a tall seat stem. It is a nifty looking scorcher.

SirMike1983 11-18-17 09:26 PM

Warm, breezy day. Weather was dry enough to ride this Raleigh DL-1 export model.

https://4.bp.blogspot.com/-COK-HqS9k...118_141013.jpg

johnnyspaghetti 11-19-17 08:19 AM


Originally Posted by dweenk (Post 20001066)
I rescued this one a while back. It has been cleaned up, but the rims are rough (as in flaking chrome, after an OA bath). The frame has "patina". I was going to make it a scorcher for someone smaller than me, but no one in the family is interested. I think it will go on CL in the spring.

It looks like its coming together nicely. Someone will want it.
I had a AMF/Herc camelback, they are small for a 6 footer It was very clean I rode to an event downtown & gave it to a complete stranger that was impressed with it. My only investment in it was elbow grease.

Charmlessman 11-19-17 08:55 AM

Well, she is home now. I took several pictures and wanted to upload a few but I get a message saying there is an authorization error. Which is weird cause I already posted pics in one of my past posts.

I can confirm its a 69 bike. 10 years before I was born!

The front brake is not working and I believe the tires are deflated but not sure if flat. I will check that later today. I have tried reading the sides of the tire. It reads Dunlop Champion made in Great Britain but I cant find the recommended pressure. Any idea on what that should be?

clubman 11-19-17 08:57 AM


Originally Posted by Charmlessman (Post 20002346)
Well, she is home now. I took several pictures and wanted to upload a few but I get a message saying there is an authorization error. Which is weird cause I already posted pics in one of my past posts.

I can confirm its a 69 bike. 10 years before I was born!

The front brake is not working and I believe the tires are deflated but not sure if flat. I will check that later today. I have tried reading the sides of the tire. It reads Dunlop Champion made in Great Britain but I cant find the recommended pressure. Any idea on what that should be?

Dunlop Champions often say INFLATE HARD on the sidewall. Probably 50 psi would more than do it.

(you're supposed to have at least 10 posts, don't know how you managed pics before.)

Charmlessman 11-19-17 09:01 AM

5 Attachment(s)
Ok I realized I cant post pics greater than 2 MB, I will fix the rest then

BigChief 11-19-17 09:04 AM


Originally Posted by SirMike1983 (Post 20001892)
Warm, breezy day. Weather was dry enough to ride this Raleigh DL-1 export model.

That looks nice! We've had lousy weather in New England this week. Haven't been riding at all. There is something special about these heavy roadsters. I never thought I would enjoy riding them as much as I do. My preconceptions of what makes a good bike were shattered when I realized how nice these bikes ride. I spend most of my riding time on one these days.

BigChief 11-19-17 12:55 PM


Originally Posted by Charmlessman (Post 20002358)
Ok I realized I cant post pics greater than 2 MB, I will fix the rest then

Beautiful. This bike will clean up very nicely. I see only light rusting that could be removed easily. The paint and transfers look to be in great shape too. You have a choice with the paint. Enamel develops a thin dull surface over time. You could just clean and wax the finish and leave the more aged look or buff with a fine polish to give a shiny deeper color for a newer look before you wax. The chrome can be restored by using a soft abrasive like aluminum foil or copper cleaning pads like Chore Boy. Be careful of fake copper pads! some are steel with just a copper flashing. Or you could soak then in something like Evapo-Rust. So, what's your plan? Are you going to do a quick clean up and ride for a while or start on a complete teardown? BTW, those John Bull brake pads ARE likely original to the bike. They will be hardened from time and very ineffective.

Charmlessman 11-19-17 02:47 PM


Originally Posted by BigChief (Post 20002700)
Beautiful. This bike will clean up very nicely. I see only light rusting that could be removed easily. The paint and transfers look to be in great shape too. You have a choice with the paint. Enamel develops a thin dull surface over time. You could just clean and wax the finish and leave the more aged look or buff with a fine polish to give a shiny deeper color for a newer look before you wax. The chrome can be restored by using a soft abrasive like aluminum foil or copper cleaning pads like Chore Boy. Be careful of fake copper pads! some are steel with just a copper flashing. Or you could soak then in something like Evapo-Rust. So, what's your plan? Are you going to do a quick clean up and ride for a while or start on a complete teardown? BTW, those John Bull brake pads ARE likely original to the bike. They will be hardened from time and very ineffective.

Thanks for the advice, my plan is to fix whatever is needed to get on the road as soon as possible. This bike will take me to my new job and back home everyday. About 8 miles each way. I want to start working on the brakes since the rear one is stuck. I will check tires later today. I am 220 lbs so I am thinking after doing some research to inflate around 90psi and see how that goes. I will check the forum for advice on working on brakes once I am in my laptop and will start cleaning the chrome with aluminum foil and see if that's enough. Thanks for the advice

clubman 11-19-17 03:34 PM


Originally Posted by Charmlessman (Post 20002837)
I am 220 lbs so I am thinking after doing some research to inflate around 90psi and see how that goes. I will check the forum for advice on working on brakes once I am in my laptop and will start cleaning the chrome with aluminum foil and see if that's enough. Thanks for the advice

I'm also 220 and you can't put 90 lbs in those tires, the rims aren't designed for it and the rubber is old. Seriously, try 50 psi, you''ll be surprised how firm they are.

BigChief 11-19-17 03:41 PM


Originally Posted by Charmlessman (Post 20002837)
Thanks for the advice, my plan is to fix whatever is needed to get on the road as soon as possible. This bike will take me to my new job and back home everyday. About 8 miles each way. I want to start working on the brakes since the rear one is stuck. I will check tires later today. I am 220 lbs so I am thinking after doing some research to inflate around 90psi and see how that goes. I will check the forum for advice on working on brakes once I am in my laptop and will start cleaning the chrome with aluminum foil and see if that's enough. Thanks for the advice

I'm pretty sure your rear brake problem is a common one on step throughs. Since the cable comes up to the rear caliper instead of down, water can drip down into the cable housing and rust. You could try spraying some penetrating oil like Kroil or liquid wrench in there and let it sit for a while and see if you can free it up with the lever. Even if you do end up replacing the cable, don't throw away the original housing. More than likely, it could be used again. They don't make that style of housing anymore and having the correct part is always a nice feature to have on a vintage bike. +1 on the tire pressure

Charmlessman 11-19-17 04:10 PM


Originally Posted by clubman (Post 20002888)
I'm also 220 and you can't put 90 lbs in those tires, the rims aren't designed for it and the rubber is old. Seriously, try 50 psi, you''ll be surprised how firm they are.

Thanks, I will follow your advice.

johnnyspaghetti 11-19-17 04:56 PM

It's a 69' yr model. Don't be surprised if one of these old tires have a age related failure and just blows out just sitting there. I put lower PSI in them just because they didn't look good and maybe 40+yr's old 30-40psi.
Some just blow and they don't do it right away it may take a couple days or more. when this happens, you loose a good tube. You may still have tubes with steel valve stems and they won't degrade w/age like the ozone exposed.tires.
On the other hand the tires maybe good to go at 50-55 PSI. The tread does look ok on the frt tire.


All times are GMT -6. The time now is 08:41 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.