Origami Bull
What do you all think? Aluminum frame, 9-speed gear set, 20 x 2.125 tires
https://cimg1.ibsrv.net/gimg/bikefor...721c8f4cf7.jpg |
I like it Pinigis!
|
Originally Posted by BikeLite
(Post 22366716)
I like it Pinigis!
|
Very impressive.
What's the price point? Could use the better crankset, perhaps the hollow type. Missing the mounting for brompton front pig nose block. |
Originally Posted by kwantani
(Post 22366820)
Very impressive.
What's the price point? Could use the better crankset, perhaps the hollow type. Missing the mounting for brompton front pig nose block. |
Originally Posted by Pinigis
(Post 22367027)
$499, but We are allowing pre-orders for the next few weeks at 399. On the next go round we could use a hollow bottom bracket and a two piece crank but that will just post the price a little bit
|
Originally Posted by tds101
(Post 22371677)
I see it's got a 260lb weight limit,...NICE!!! (It's BEAUTIFUL!!! :love:)
|
1) The "thick" rim looks like it would need extended versions of schrader or presta.
2) The number of spokes and being so close to the valve can make it hard to use some chucks for air. |
Originally Posted by Pinigis
(Post 22371890)
Thank you. I am very happy with the way it turned out.
|
Originally Posted by BikeLite
(Post 22372048)
1) The "thick" rim looks like it would need extended versions of schrader or presta.
2) The number of spokes and being so close to the valve can make it hard to use some chucks for air. 2. Actually, there is plenty of space for even a larger chuck. The angle is a little deceiving. |
Originally Posted by tds101
(Post 22377351)
If this was also available with a rear hub motor and small battery, I'd have bought it in an instant. 350 watts, and not too much wattage, and it wouldn't even have been all that expensive. Especially since I'm not fond of the boat anchor, fat tire ebikes. This is a perfect ebike canvas.
|
Originally Posted by Pinigis
(Post 22377584)
OK, I have to admit, that is a pretty good idea. I will look into battery options.
|
Seconded for the hub motor and small battery. This looks like a solid platform for it.
|
Originally Posted by Pinigis
(Post 22367027)
$499, but We are allowing pre-orders for the next few weeks at 399. On the next go round we could use a hollow bottom bracket and a two piece crank but that will just post the price a little bit
|
Originally Posted by jdogg111
(Post 22388823)
whats the total weight of this bike, thanks
|
Originally Posted by Pinigis
(Post 22388904)
We are at 28.7 lbs. The 2.125" tires add comfort, and a little weight.
|
Originally Posted by jdogg111
(Post 22389264)
thanks, any plans for a single speed, ala vilano urbano, super light, pedal brake ,no cables?
I should have some photos of the final product in two weeks. It is an aluminum frame, very simple, and very light. |
awesome,be sure to post the pictures, i'm sure that baby will sell.....
|
Originally Posted by Pinigis
(Post 22389277)
You must be a mind reader!! Yes, we have a single-speed, coaster-brake model coming in April. Since we name our bikes after origami paper figures, we considered the simplicity of the bike and went with a snake name (what could be simpler than rolling up a piece of paper and calling it a snake?), so it will be out Cobra.
I should have some photos of the final product in two weeks. It is an aluminum frame, very simple, and very light. |
Originally Posted by tds101
(Post 22390077)
Killin it!!! :thumb: (Hopefully it'll have a high weight limit,... :p)
|
Originally Posted by Pinigis
(Post 22390098)
220lb limit
|
Originally Posted by Pinigis
(Post 22389277)
You must be a mind reader!! Yes, we have a single-speed, coaster-brake model coming in April. Since we name our bikes after origami paper figures, we considered the simplicity of the bike and went with a snake name (what could be simpler than rolling up a piece of paper and calling it a snake?), so it will be out Cobra.
I should have some photos of the final product in two weeks. It is an aluminum frame, very simple, and very light. |
Originally Posted by jdogg111
(Post 22432455)
did you ever get the photos of the cobra you mentioned earlier this year?
https://cimg2.ibsrv.net/gimg/bikefor...05ae72d10f.jpg https://cimg3.ibsrv.net/gimg/bikefor...a6e20a8611.jpg https://cimg4.ibsrv.net/gimg/bikefor...9fe518fa49.jpg |
Originally Posted by Pinigis
(Post 22432460)
yes
https://cimg2.ibsrv.net/gimg/bikefor...05ae72d10f.jpg https://cimg3.ibsrv.net/gimg/bikefor...a6e20a8611.jpg https://cimg4.ibsrv.net/gimg/bikefor...9fe518fa49.jpg |
Originally Posted by jdogg111
(Post 22432940)
awesome ! whats the price. when is it available. weight of the bike? thanks so much.
|
All times are GMT -6. The time now is 11:12 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.