Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Road Cycling (https://www.bikeforums.net/forumdisplay.php?f=41)
-   -   Addiction 2021.3 (https://www.bikeforums.net/showthread.php?t=1233876)

DougRNS 07-16-21 07:19 PM


Originally Posted by Velo Vol (Post 22144965)

Luka is from ~87. I'm shocked and rightfully surprised you like the song given your limited appreciation of music.
there may be hope for you yet.

DougRNS 07-16-21 07:21 PM


Originally Posted by 2manybikes (Post 22144971)
wow!

Yes, wow is correct.

Velo Vol 07-16-21 07:21 PM


Originally Posted by DougRNS (Post 22144976)
Luka is from ~87. I'm shocked and rightfully surprised you like the song given your limited appreciation of music.
there may be hope for you yet.

Incorrect.

rjones28 07-16-21 07:23 PM


Originally Posted by zymphad (Post 22144954)
Was it one of those ISP?

Nope. Standard seat post for a short rider. Just needed to get about an inch lower.

DougRNS 07-16-21 07:23 PM


Originally Posted by Velo Vol (Post 22144978)
Incorrect.

Incorrect.

bampilot06 07-16-21 07:24 PM

did everything but pull the cranks. Noise is still there.

Def. Louder when the right foot is pushing down, and the more force the louder it is.

Will investigate further tomorrow.

New stem height felt fine but I think I need a shorter stem now.

Velo Vol 07-16-21 07:26 PM

datlas do you use this? (Excluding the stuff under 10).


LesterOfPuppets 07-16-21 07:46 PM

Woohoo, Amazon Prime has the Mariners game on!

:bday:

Velo Vol 07-16-21 07:53 PM


Originally Posted by LesterOfPuppets (Post 22144886)
​​​​​​
#thewestisthebest

No. Unless you mean the west east coast.

Mojo31 07-16-21 08:03 PM


Originally Posted by datlas (Post 22144793)
Went for a post-work swim. Daughter #1 lives in an apartment complex that has a pool. It was very refreshing.

I jumped into ours this afternoon. Temp was 95. Was refreshing.

DougRNS 07-16-21 08:06 PM


Originally Posted by LesterOfPuppets (Post 22145004)
Woohoo, Amazon Prime has the Mariners game on!

:bday:

Every game is free on MLB.TV today.

DougRNS 07-16-21 08:08 PM


Originally Posted by LesterOfPuppets (Post 22144886)
​​​​​​I'll stick to Spences Bridge, thank you very much.

https://en.m.wikipedia.org/wiki/Spences_Bridge

#thewestisthebest

Reminds me of this:

DougRNS 07-16-21 08:13 PM


Originally Posted by Velo Vol (Post 22144985)
datlas do you use this? (Excluding the stuff under 10).

https://twitter.com/RogueWPA/status/1416090144591925252

this is a real pain scale. I live in 4-7 since last September. At least I'm still awesome. Which is nice. :thumb:
https://cimg8.ibsrv.net/gimg/bikefor...c19c2e5e49.jpg

bampilot06 07-16-21 08:16 PM

The moment park tool informs you, you need a special tool to take you crank arm off. You donít have the special tool, and said special tool cost 15.00. SMH.

Looks like trek has the tool in stock so will pick it up tomorrow.

Park tool video shows just putting grease on the spindle, I am assuming I put grease on the bearings.

But my BB has the caps on either side, so I am not sure I will even see my bearings once I pull the arm.

abshipp 07-16-21 08:23 PM


Originally Posted by WhyFi (Post 22143826)
fast kids ride that happens weekly at the crack o' dawn

I've got a colleague that rides with a group like that.

His ability to be out of the house before 5am consistently is big reason why he's fast and I'm not.

abshipp 07-16-21 08:24 PM


Originally Posted by bampilot06 (Post 22144984)
did everything but pull the cranks. Noise is still there.

Def. Louder when the right foot is pushing down, and the more force the louder it is.

Will investigate further tomorrow.

New stem height felt fine but I think I need a shorter stem now.

What kind of pedals do you have?

LesterOfPuppets 07-16-21 08:27 PM


Originally Posted by bampilot06 (Post 22145044)
The moment park tool informs you, you need a special tool to take you crank arm off. You donít have the special tool, and said special tool cost 15.00. SMH.

Looks like trek has the tool in stock so will pick it up tomorrow.

Park tool video shows just putting grease on the spindle, I am assuming I put grease on the bearings.

But my BB has the caps on either side, so I am not sure I will even see my bearings once I pull the arm.

​​​​​​A thin film on the bearings is nice, just so they don't stick to other metal parts - you don't want to have to get out the torch to take things apart again in a couple years, after a bunch of rain rides.

LesterOfPuppets 07-16-21 08:29 PM


Originally Posted by DougRNS (Post 22145032)
Every game is free on MLB.TV today.

I should've settled in front of the TV much earlier in the day.

bampilot06 07-16-21 08:29 PM


Originally Posted by abshipp (Post 22145061)
What kind of pedals do you have?


a pair of really old spd sl

and pair of brand new spd sl.

Just put the brand new pair on, didnít change anything.

LesterOfPuppets 07-16-21 08:36 PM


Originally Posted by DougRNS (Post 22145036)
Reminds me of this:
https://youtu.be/NOW7i7aWQoE

That's what I was thinking of.

Was about to respond to VV's protest with "The Lizard King is always right!"

DougRNS 07-16-21 08:38 PM


Originally Posted by LesterOfPuppets (Post 22145068)
I should've settled in front of the TV much earlier in the day.

Life's too short to have regerts - A. Lincoln

DougRNS 07-16-21 08:44 PM


Originally Posted by LesterOfPuppets (Post 22145068)
I should've settled in front of the TV much earlier in the day.

Depending on how hard-core you are, this might be of interest.

https://cimg2.ibsrv.net/gimg/bikefor...8566d17aaf.jpg

big john 07-16-21 08:57 PM


Originally Posted by bampilot06 (Post 22145044)
The moment park tool informs you, you need a special tool to take you crank arm off. You donít have the special tool, and said special tool cost 15.00. SMH.

Looks like trek has the tool in stock so will pick it up tomorrow.

Park tool video shows just putting grease on the spindle, I am assuming I put grease on the bearings.

But my BB has the caps on either side, so I am not sure I will even see my bearings once I pull the arm.

What special tool? Can you link a pic of the BB or the Park video?

rjones28 07-16-21 08:59 PM


Originally Posted by LesterOfPuppets (Post 22145066)
​​​​​​A thin film on the bearings is nice, just so they don't stick to other metal parts - you don't want to have to get out the torch to take things apart again in a couple years, after a bunch of rain rides.

There was a LeMond with a stuck seat post in the shop today.

LesterOfPuppets 07-16-21 09:03 PM


Originally Posted by DougRNS (Post 22145089)
Depending on how hard-core you are, this might be of interest.

https://cimg2.ibsrv.net/gimg/bikefor...8566d17aaf.jpg

Oh I could watch some minor league baseball this weekend!

DougRNS 07-16-21 09:08 PM


Originally Posted by LesterOfPuppets (Post 22145112)
Oh I could watch some minor league baseball this weekend!

Beer tastes just as good when watching the minors.
#truth

big john 07-16-21 09:28 PM


Originally Posted by rjones28 (Post 22145107)
There was a LeMond with a stuck seat post in the shop today.

A steel frame? Did you get it out?

LesterOfPuppets 07-16-21 09:35 PM


Originally Posted by rjones28 (Post 22145107)
There was a LeMond with a stuck seat post in the shop today.

Oh dear, I'd better go check my Lemond's seatpost.

LesterOfPuppets 07-16-21 09:36 PM

Holy Moley!!!


https://cimg9.ibsrv.net/gimg/bikefor...dfe1bace8d.png

WhyFi 07-16-21 09:37 PM


Originally Posted by abshipp (Post 22145059)
I've got a colleague that rides with a group like that.

His ability to be out of the house before 5am consistently is big reason why he's fast and I'm not.

Careful selection of parents helps quite a bit, too. :(


All times are GMT -6. The time now is 06:38 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.