|
Originally Posted by BigChief
(Post 21127604)
Just an update on my experiment with replacing Sturmey Archer's zinc (or whatever it is) plating on a thoroughly rusted surface. I discovered Action Magic dry lubricant back in my tool and die maker days. I noticed that besides lubricating, it prevented rust. I had been using it to cover rust spots on trigger shifter cases, but there it was usually only small rusty spots starting to poke through the finish. On this guide wheel, the plating was completely gone leaving nothing but a brown rusted surface. I didn't remove the surface rust. The silver Action Magic powder is so fine that it sinks into the rust and bonds with it. I lightly burnished it it with a wooden match stick. At first, the finish looked new and bright, but now after almost a year, it has darkened and shows no sign of rust. I'm pleased with it. Even looking closely, you would never guess this finish had been restored.
last summer and today: |
Originally Posted by thumpism
(Post 21128654)
My wife has killed several writers by binge-reading all their books.
|
Originally Posted by gster
(Post 21129191)
Serial number 4757 RC
You've got a great bike there. Red Raleigh Sports were definitely a thing up here, I've had 4 of them, still have 2. |
Originally Posted by clubman
(Post 21129818)
RC's are almost always Canadian market at least in the 50's and early 60's. RA's for the US and RB's for the UK imo.
You've got a great bike there. Red Raleigh Sports were definitely a thing up here, I've had 4 of them, still have 2. good words and advice. I'm starting to realize that these EA1 equipped bikes were/are something special. Whoever bought this bike back in 1955, was very serious about riding/racing and chose this bike for a reason. Probably more expensive than the other bikes on display or, maybe a special custom order from the factory.... Ridden for many years and then put away until the 70"s. More to follow. |
Originally Posted by Ged117
(Post 21128978)
Hi fellows,
Please see the culprit in the photo. I've managed to find and fix all of the rattles on the '50 Superbe. Everything is nice and tight now. However the ornament end of the front fender rattles loudly. Has anyone else had this problem? It's only a little loose. How to tighten it? A tiny bit of glue underneath perhaps? |
Originally Posted by paulb_in_bkln
(Post 21129797)
What are you gonna do? I've lost count of the number going derelict around here. Recently discovered another on Dekalb Ave. I'm debating whether to take the back wheel. (I probably will.) How many AW hubs do I need? (No need to answer.)
Sports https://cimg5.ibsrv.net/gimg/bikefor...12beeddc4d.jpg Condorhttps://cimg2.ibsrv.net/gimg/bikefor...4c17d737a4.jpg If I knew a couple of sisters who needed bikes I would gladly get the two Hercs and fix them up for a new life of service but priced as they likely are (at least $50 each would be my guess based on previous inquiries--not outrageous but an extravagant expenditure on spec) I'd just have to stash them in the rafters until I decided what to do. I'm afraid the two little Hercs will be left to the elements. I wish the junk shop did not regard them as junk and leave them all outside. |
1955 Humber Club
This bike cleaned up remarkably well in a day and a half https://cimg2.ibsrv.net/gimg/bikefor...9298d32357.jpg Not sure why the focus is off.... I'll probably keep it in the club style (thanks to Clubman's praise). https://cimg8.ibsrv.net/gimg/bikefor...c9bf516671.jpg NOS GB stem. The drop bars will limit my riding the bike but I think it deserves to maintain it's heritage. I'll have to find some later style Raleigh calipers for it. I have some NOS cables in the garage. Saddle and chain installed https://cimg6.ibsrv.net/gimg/bikefor...d3264aebed.jpg |
For all you Humber fans.
https://richmond.craigslist.org/bik/...983036996.html Vintage Humbler Women's Bike - $100 (Woodland Heights) bicycle frame material: other/unknown bicycle type: cruiser condition: fair electric assist: none frame size: 21" make / manufacturer: Humbler suspension: none (rigid) wheel size: 24 in Selling a 1950s British bicycle by the Humbler company. Brakes work but not sure if shifter functions correctly. $50 or best offer. |
Originally Posted by thumpism
(Post 21131810)
For all you Humber fans.
https://richmond.craigslist.org/bik/...983036996.html Vintage Humbler Women's Bike - $100 (Woodland Heights) bicycle frame material: other/unknown bicycle type: cruiser condition: fair electric assist: none frame size: 21" make / manufacturer: Humbler suspension: none (rigid) wheel size: 24 in Selling a 1950s British bicycle by the Humbler company. Brakes work but not sure if shifter functions correctly. $50 or best offer. Spell Check got the seller? I cannot think of any other reason to add the L, turning Humber, to Humbler? :lol: |
1955 Humber Update
A good few hours yesterday https://cimg0.ibsrv.net/gimg/bikefor...a09bf47ee1.jpg A visit to George at Parts Unknown yielded two Raleigh calipers. Rusty but a good vinegar/brass brush treatment cleaned them up. https://cimg2.ibsrv.net/gimg/bikefor...9b3d8f8aea.jpg Vintage trigger from the parts bin is not quite period appropriate but will do for now. https://cimg8.ibsrv.net/gimg/bikefor...80115323ce.jpg Brake cables and clips are NOS from Hoop Rider in Owen Sound. https://cimg6.ibsrv.net/gimg/bikefor...829ac028b5.jpg https://cimg0.ibsrv.net/gimg/bikefor...1d1cb0d499.jpg Shifter cable is used and should be replaced. Front hub needs some adjustment . Current costs Bike $110.00 Saddle $50.00 Stem $40.00 Brake cables and pads $20.00 Calipers $10.00 Clips $5.00 Supplies $10.00 Trigger and chain from stock 19T cog from stock as well. |
|
Originally Posted by gster
(Post 21132022)
Nice work on the clean up! |
Your Humber cleaned up really nicely - looks great! Humbers seem uncommon, any idea if it was sold here new?
|
Originally Posted by Bomarc
(Post 21132808)
Your Humber cleaned up really nicely - looks great! Humbers seem uncommon, any idea if it was sold here new?
to Canada. |
Originally Posted by gster
(Post 21132862)
Yes, as Clubman pointed out, the serial number ending with RC indicates a bike shipped
to Canada. |
Originally Posted by Bomarc
(Post 21132892)
So no backstory/insight from the seller?
he's a bit of a hoarder and finds bikes/vintage stereos at garage sales. I bought a vintage turntable as well. I've made up my own story about the bike. The bike was purchased by a young man in the mid 1950's who was very serious about cycling. The bike was more expensive that the other 3 speeds on the floor but he decided it was worth it. The bike was ridden and raced for several years but as his life got more complicated he rode it less and less and it was relegated to the basement. Over time some of the original parts went missing. The trigger, the saddle and one of the brake calipers. By now it was the mid 1970's and the bike was either sold or given a makeover for his son. A new vinyl saddle was installed, new tires as well as a Norco speedometer. The bike was ok but it was old and wasn't a 10 speed. Back it went to the basement.... Forty years later, the man died and his family had to clear out his house. By now the bike had been sitting for so long that it really looked like a piece of junk and it was sold at a garage/estate sale for $10.00. The buyer, Gary, knew it was worth something but didn't have the skills to restore it. He placed an ad on Kijiji and that's how I found it. https://cimg1.ibsrv.net/gimg/bikefor...bf6b63a0da.jpg We are not so much owners of all this stuff but custodians. All in all a very nice project. I stopped in to see George at Parts Unknown yesterday to show off the bike and also got a pump clamp to finish it off. Despite being a large frame, the size is deceptive as the angles are quite slack. |
Originally Posted by gster
(Post 21132950)
No,
he's a bit of a hoarder and finds bikes/vintage stereos at garage sales. I bought a vintage turntable as well. I've made up my own story about the bike. The bike was purchased by a young man in the mid 1950's who was very serious about cycling. The bike was more expensive that the other 3 speeds on the floor but he decided it was worth it. The bike was ridden and raced for several years but as his life got more complicated he rode it less and less and it was relegated to the basement. Over time some of the original parts went missing. The trigger, the saddle and one of the brake calipers. By now it was the mid 1970's and the bike was either sold or given a makeover for his son. A new vinyl saddle was installed, new tires as well as a Norco speedometer. The bike was ok but it was old and wasn't a 10 speed. Back it went to the basement.... Forty years later, the man died and his family had to clear out his house. By now the bike had been sitting for so long that it really looked like a piece of junk and it was sold at a garage/estate sale for $10.00. The buyer, Gary, knew it was worth something but didn't have the skills to restore it. He placed an ad on Kijiji and that's how I found it. https://cimg1.ibsrv.net/gimg/bikefor...bf6b63a0da.jpg We are not so much owners of all this stuff but custodians. All in all a very nice project. I stopped in to see George at Parts Unknown yesterday to show off the bike and also got a pump clamp to finish it off. Despite being a large frame, the size is deceptive as the angles are quite slack. |
Originally Posted by Bomarc
(Post 21132974)
And now its in the care of an enthusiast that realizes its value and can enjoy it as much as the original owner. Well done.
really suit my geometry..... I may put it on display at a bike shop up the street. |
I love a good bike story even a made up one, I once went to a garage sale and a nice but over priced ladies Schwinn world sport and made up a story about Wanda the World sport and her adventures as a college bike, I posited that it was over priced because she told her husband it could go in the sale but she didn't really want to part with a happy piece of her past
|
A little different.
https://cimg3.ibsrv.net/gimg/bikefor...f1600e1ae6.jpg
Got a new toy! https://cimg6.ibsrv.net/gimg/bikefor...4a648439f8.jpg Hmmm. What could it be? https://cimg3.ibsrv.net/gimg/bikefor...6d3745a5c5.jpg Oooo! Purdy! https://cimg9.ibsrv.net/gimg/bikefor...e1b6d9035d.jpg Some assembly required, batteries not included.... https://cimg0.ibsrv.net/gimg/bikefor...65b78ccfdd.jpg All done! Raleigh Tourist 2018 https://cimg6.ibsrv.net/gimg/bikefor...2378d08683.jpg Sturmey Archer powered. https://cimg2.ibsrv.net/gimg/bikefor...eb58157d8e.jpg These were a challenge to set up, having never done disk brakes before. https://cimg5.ibsrv.net/gimg/bikefor...5bd0a32eb0.jpg Nice leather seat. https://cimg3.ibsrv.net/gimg/bikefor...83563a946d.jpg And name brand bell. I realize this is neither vintage or collectable, but it looked cool, so I bought one. It is a three speed, and "english," so thought I would share and post here. My apologies if out of place. Shakedown ride was tonight after 2 weeks of off and on assembly. Items noted. It needs to be geared down some. Not as bad as traditional AW geared hubs, but just a bit. I can cruise in high gear on the flats, but it's a workout. Any hill at all, and you are downshifting. The frame is too tall for me. Zero clearance standing over the frame. Bike shop was the one who suggested getting this size frame. Oh well, I'll just have to be careful. Bike looks to have originally designed with a one piece crank and changed to a sealed bottom bracket as an afterthought. It weighs about as much as my 69 sears three speed, so not too bad. Regearing will take care of most of that. Having never messed with disk brakes before, this was a bit of a challenge. I ended up after much fiddling and growling using a small dim flashlight held betwixt my toes shining up through the disk so that I could make small adjustments (make too big of adjustments, and the thing moves all over the place...grrr.) and get the allen screws tight with there still being light shining through on either side of the disk. Hey, it worked... The cables all need to be shortened by around 6 to 8 inches or so, but that is easy enough to do. One neat thing, the pedals are overhaulable! They were waaaay tight, so I took off the threaded aluminum caps to find a jam nut, washer and cone with 6 sides on the top for a socket. Sweet! All better now with a little adjustment. Anyhoo, thought I would share my new toy with everyone. Hope everyone had a good weekend! |
I like that shade of green. It looks very similar to my bike painted the Raleigh Green of 1950.
https://cimg8.ibsrv.net/gimg/bikefor...cdf0fe81fa.jpghttps://cimg9.ibsrv.net/gimg/bikefor...fe6f8652f7.jpg |
Humber Sports
I think my bike https://cimg5.ibsrv.net/gimg/bikefor...84800e7f39.jpg is essentially this bike with Humber specific fittings https://cimg4.ibsrv.net/gimg/bikefor...f2ca36049f.jpg |
Originally Posted by Iron Horse
(Post 21133640)
<-------->
I realize this is neither vintage or collectable, but it looked cool, so I bought one. It is a three speed, and "english," so thought I would share and post here. My apologies if out of place. <--------> Anyhoo, thought I would share my new toy with everyone. Hope everyone had a good weekend! |
I see they have the shifter mounted under the brake lever. I wonder how well that worked.
|
Originally Posted by gster
(Post 21134396)
Humber Sports
I think my bike https://cimg5.ibsrv.net/gimg/bikefor...84800e7f39.jpg is essentially this bike with Humber specific fittings https://cimg4.ibsrv.net/gimg/bikefor...f2ca36049f.jpg I love the way they mounted the front headlights on the Club bikes. If I decide on a generator hub for the Peugeot front wheel build, maybe I'll try and do that with a modern lighting system. |
| All times are GMT -6. The time now is 07:38 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.