Bike mounting solutions for truck bed rail -- need help figuring something out.
I'm looking for something a bit different and hope you folks can help. I've got a bed cover with integrated T-slot rails. Yes, I can run crossbars and mount up a tray. The problem is that when I need to transport the bike, I'm also hauling a horse trailer and need to load stuff in/out of the bed, which means the crossbars/bike would be in the way. Yes, I know I could get roof-mounted crossbars, but I'd really rather not spend the money on that when I've got a perfectly good slotted rail, I just need a unique mounting solution.
So, what I want to do is figure out a way to mount a bike on the bed rail, in parallel with the T-slot. If I could do that, then the bike would be out of the way and I could still load stuff in/out of the bed. Unfortunately, everything I can find is setup to mount perpendicular (not parallel) to crossbar T-slots. Here are some pictures of what I'm working with. What are your ideas? https://cimg0.ibsrv.net/gimg/bikefor...684cdac0a.jpeg https://cimg1.ibsrv.net/gimg/bikefor...5173bc89e.jpeg |
To clarify, are you asking for a way to essentially mount your bike on top of the bed sides?
If that is the case, why not get use some bolts and washers to run a 2x4 or 2x6 up the length of your bed rails then use fork mounts and a velcro strap for the rear wheel? Of course, I would be concerned that such a set up would not be particularly stable and could fall over. A cross beam or two would help add stability. |
I know there are side-mount options for my Toyota Tacoma, for trucks fitted with a bed rack, tent platform, etc:
Side Mount Bike Rack But I think your retractable cover makes that a no-go. Does your cover manufacturer offer any accessory mounts? |
How many bikes you carrying? Open the cover, lay the bike down inside the bed. Close the cover. Easy Peasey!
|
Originally Posted by topflightpro
(Post 22198310)
To clarify, are you asking for a way to essentially mount your bike on top of the bed sides?
|
Originally Posted by redcon1
(Post 22199494)
I know there are side-mount options for my Toyota Tacoma, for trucks fitted with a bed rack, tent platform, etc:
Side Mount Bike Rack But I think your retractable cover makes that a no-go. Does your cover manufacturer offer any accessory mounts? |
Originally Posted by Iride01
(Post 22199782)
How many bikes you carrying? Open the cover, lay the bike down inside the bed. Close the cover. Easy Peasey!
|
Yakima makes 2 systems that install on a truck T rail system, Overhaul and Outpost. Overhaul puts cross bars at roof level (30"), Outpost is 19" above side rails and also has cross bars. Both can then take assorted bike trays, (Frontloader as example).
Looks like you've a retractable Tonneau cover so either of these work. They are also very pricey at around $1000 for the towers, plus the T rail fit kit, plus the HD crossbars, then add the cost of the bike trays, the Frontloader is about $250. This design does let you get full access to whatever is stored in the bed. The Yak stuff is the only stuff that works with T rail as far as I could determine when I was exploring the options for a Frontier I purchased last Feb. By the time I looked at a Pace Edwards cover, plus the Yak gear, it was near the price of a Leer cap with T rails, which was the route I chose. |
Originally Posted by RNAV
(Post 22200554)
Who makes the rack you pictured? The cover manufacturer does offer accessories, but they're crossbars and will get in the way.
Square One Creations |
Mount on the front of the horse trailer?
|
Originally Posted by RNAV
(Post 22200553)
Correct. I'd thought about a 2x4, but was hoping for something more substantial with a finished look -- preferably made out of metal.
I think the challenge is going to be that you need some lateral stability. I question whether one T-Rail could support a bicycle on it's own? |
Originally Posted by topflightpro
(Post 22201306)
What's your budget? Many small machine shops are willing to take on small projects like this and may already have a solution you could use. That said, one-off products tend to be expensive.
I think the challenge is going to be that you need some lateral stability. I question whether one T-Rail could support a bicycle on it's own? |
Originally Posted by seypat
(Post 22201289)
Mount on the front of the horse trailer?
|
Something that bolts on like the SideRide above but has a hitch receiver sitting above the bed. Plug in a hitch carrier as needed. The receiver would face inward and the hitch carrier would be parallel with the bed.
|
Originally Posted by RNAV
(Post 22201375)
Hoping to be around $100. It's not really a t-rail . . . it's a bedrail that has a t-slot machined into it, and it's secured with bed rail clamps and is pretty sturdy. I've got a bed rack that installs into the bedrails (for rooftop tents, kayaks, etc.) and the system is rated to 500 pounds. I could use my bed rack, but I was hoping to come up with a solution that I could leave installed most of the time. I only use the bed rack a handful of times a year.
Or go with just a roof tray. Many have a t-rail like your bed. I'm just not sure how you would tighten it down (you could drill holes in the tray)/ |
Originally Posted by topflightpro
(Post 22201536)
In that case, maybe try to find a piece of black extruded aluminum tubing in a 2x4 or 2x6 size that you could attach to the T-rail and then bolt on a fork mount and rear wheel strap./
|
I know I wouldn't be trusting my bikes to a $100 home brew solution. I would be installing Yakima/Thule or Rock Mount 58" cross bars with a T rail adapter on the towers, then how ever many bike trays as needed. I would get parts if possible on Craigslist (except the T rail kit), and install the bikes as far towards the center of the bed as possible to allow side access into the bed. This system would only be maybe 4" above the truck side rails so easy to lift bikes into the trays.
|
Seems like you need something like this guy has. Doesn't your bed cover mfr offer anything similar? Even if it's just the rails going from left to right side of the bed over the cover, then you can DIY something.
https://renegadecovers.com/wp-conten...v=7516fd43adaa https://renegadecovers.com/wp-conten...v=7516fd43adaa |
Originally Posted by Iride01
(Post 22203107)
Seems like you need something like this guy has. Doesn't your bed cover mfr offer anything similar? Even if it's just the rails going from left to right side of the bed over the cover, then you can DIY something.
https://renegadecovers.com/wp-conten...v=7516fd43adaa https://renegadecovers.com/wp-conten...v=7516fd43adaa |
Originally Posted by Steve B.
(Post 22203153)
I think all 3 major rack system manufacturers - Yak/Thule and Rocky Mounts make T rail adapters, I have one on my truck cap, so I can use my Yak system. They are not particularly cheap, I think about $120, for a set of T nuts (the T on a bolt plus a nut), and custom feet for the towers. Mine are the Yakima units that have a quick clamp release so the rack goes on and off the truck in about 30 seconds. It's a nice system, better than Thule, IMO, but essentially similar to what's in your photo.
At least that's what my wife told me. I don't remember doing so! |
Originally Posted by Iride01
(Post 22203177)
I was dropping pretty hefty amounts of change into the ocean.
! |
All times are GMT -6. The time now is 01:27 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.