Originally Posted by
cyrano138
The non-drive side of the bottom bracket was pretty loose so I snugged it down a bit. But i did it at the same time that I pulled the cranks and lubed them (just a dab if grease) and retightened the crank bolts, so I'm not sure which one it was but my money is on the crank arms against the spindles.
Hard to say, since you addressed three things at once (I would have done the same), but since the NDS BB cup was "pretty loose," I would guess that was the culprit. My crankarms always go on bone dry, and I've never had one make a peep unless the bolt was loose. Glad you got it sorted, regardless.
