Update on my 1000W E+ kit warranty repair.
I picked up the parcel with repaired kit from post office yesterday.
EMS /E+ maker/ delivered on promise - as Rick promised motor is brand new, rims are still mostly black on sides where brake pads work - indication that wheel run less than like 10km maybe.
I install it on my frame with E+ wheel battery and tried it.
Much, much better than original the first I had,cogging/jerking is gone even at 50% discharge.
Display is the original one I bought with kit, they programmed it to new motor.
I did 2 tests to make sure is OK and I am going to do another one and after that wheel must be trued.
My E+ bearly reaches 30mph for just a moment at the time without pedalling.
Acceleration when battery fresh is fenomenal, the best of any bike I tested, motor bearly get warm after 15 minutes of power level 8 riding, power drawn rearly approach 1000W usually around 900W even near top speed, but that's according to EMS display, of course I will be installing Cycle Analist from ebikes.ca.
I will write more about spped and distance reading from display, I am veryfying it.
Last edited by miro13car; 08-05-11 at 07:09 AM.