Originally Posted by rlong
May I ask where you found the plans (if any) for the home built dual 26?
There weren't any formal plans. I just cut the seat tube and top tube on the first donor bike, and went from there, pulling the seat stays down and adding a downtube from another donor as the seat mounting tube. The boom was from new chromoly. Plans on the seat mounting clamp were found at recumbents.com, and the riser and handlebars are 7/8" aluminum tubing. Building a seat would have complicated the project, but I was able to use an old hardshell that was lying around.
Due to the junkyard-quality donor bikes, it's pretty clunky; but in spite of it all, it is almost as fast as my faired V-Rex.