Originally Posted by
first trip
in this pic we see that the piece cannot turn around the axle cause i has the same form (a rectancircle)
is this what you want me to check?
https://imgur.com/vlRBqlR
https://imgur.com/vlRBqlR
what do you mean by standart piece?
some said not to put the weight of the trailer on the axle , is it because it would eventually bend it?
it would be safer and more versatil if i could have a piece in wich i can screw the regular screws that the trailers send in de facto.
i could acces a grinder. is your second drawing stil relevant?
where it is written
two holes for existing screw cap, those holes have threads how can i exactly drill hole in face of them, and do those screws need to have thread too?
You do not need a torque arm. The piece in the photo takes care of that.
The standard pieces would be the parts that came with the trailer that you want to use and yes the second drawing is still relevant.
You do not need threads in the pieces you are going to make. The treads are already in the framed. The holes need to be large enough for the bolts to go through.