Originally Posted by
chaadster
That one does not look like it can adjust fore/aft and tilt independently. It’s a one-piece top clamp with bolts on either side. It’ll micro-adjust, but I do not see how it could hold the rails while tilt is adjusted or hold tilt while fore/aft is adjusted.
The bolts are actually front and rear. To adjust the tilt down in front, loosen the rear bolt 1/2-1 turn, then tighten the forward bolt. Reverse the direction to raise the nose. You haven't loosened the clamp enough for the fore-aft adjustment to slip. If you want to adjust fore-aft, loosen either bolt enough for the saddle to move, locate the saddle where you want it on the clamp, and tighten the same bolt -- tilt will return to the same place it started.