Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,107
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4217 Post(s)
The rim's outer most diameter is important for tire retention (as well as a few other design factors). I would not sand it down. Now the rim's well, the lowest diameter between the bead seat beds, is very important to tire mounting ease.
To answer the simple question. Yes, we see rims that have been ridden with no tire, on paved surfaces, resulting in the same effect of sanding every so often. (Keep working in the LBS field for years and you'' see a lot of...) Now the "sandpaper" is rather coarse and the rim's side walls tend to also have some pressure "molding" (to put in mildly). Please believe me when I, and others have said, suggest you don't do this even with hardware store bought sand paper. Andy
__________________
AndrewRStewart