Originally Posted by
squirtdad
if you take the lever off and look inside, isn't there a hex bolt or screw that loosens and tightens the expander bolt? I am guessing that it is getting in the way.....and is probably needs to be loosened. can you take the lever off and show pic of the inside?
I only snugged up the internal expander bolt AFTER I took the assemble off of the handlebar. I didn't want to lose anything.
The problem is that I can't get the circular section of the shift lever to slide far enough into the body so that I can put the bolt through the body and into the shift lever to keep the shift lever in place. Look at the image and you can see that the round hole for the shift lever bolt to screw into is not lined up with the hole in the body and thus I can't insert the bolt into the shift lever.
Cheers