Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,100
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4212 Post(s)
And these cartridge press fitted bearing BBs is what I thought the OP was referencing. IIRC the shells of these early MtBs were close to the same OD as threaded shells are. So a 42OD bearing won't come anywhere near close to fitting, of an adaptor made for this 42mm press fit shell won't come close. Andy
__________________
AndrewRStewart