Originally Posted by
SlimAgainSoon
...
I decided to shift the gear range lower by installing a larger cog on the hub...I couldn’t figure out how to remove the original cog (a 20-tooth). With some help via a YouTube video ... I got the 20-tooth off the Alfine and installed a 22-tooth cog.... I’d recommend this to others who find the gear range pushed a bit to the high side for a commuter...Once you get the hang of it, swapping cogs is easy. I found the larger cogs online, and they were not expensive ($8 or so)...For me, swapping the gears allows dialing in a range that works better than stock.
Good info. Thanks.
Someday I expect to go with an internally geared hub. This advice may come in handy.