It's easy to make a longer B screw from an M4 button head screw with the head ground down, but too much gap will foul up the 10-11 shift.. The gap needs to be about 3mm instead of 5mm. On my bikes, the screw in all the way creates too much gap. Unless the axs chain won't work with your crank, it's the best for the cassette.
If shifting isn't good, blame the 11-36 cassette - the sprocket spacing is not correct. A sram 10-36 will work.
Last edited by DaveSSS; 11-20-21 at 07:59 PM.