Originally Posted by
juvela
-----
the pivot pins, part nr. 359, were changed ~1968 to these from the previous brass examples
iirc the cable anchor in the lever also changed at this epoch from steel to dural (not illustrated in parts drawing below)
one thing ran into with them is that in some cases the pins are wont to walk out of their billeting with use
when they do so the heads can damage costly hoods
if have occasion to replace hoods or have levers apart for other reason like to place a drop of loctite on the threads to encourage them to remain home
-----
Thanks for the tip. I’ll check them occasionally and add loctite if I notice any movement.