View Single Post
Old 05-23-20, 08:31 PM
  #4  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 17,960

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4153 Post(s)
Liked 3,751 Times in 2,245 Posts
What is the ft der? If a matching series one is the cable correctly routed about the anchor bolt? Is the crankset also a matching one? Is there much loose cable when in the default position (the small ring)? If the cable was disconnected from the der and held by hand and then the shift lever cycled through it's range what happens? Will it pull the cable and hold it's large ring index position? Is there a barrel adjuster in the system? Have you followed any instructions and base lined the system? Andy
__________________
AndrewRStewart
Andrew R Stewart is offline