Thread: Torch Leak
View Single Post
Old 07-22-21, 06:28 AM
  #7  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,084

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4205 Post(s)
Liked 3,863 Times in 2,311 Posts
Unrelated to the OP's question but of passing interest- I bought a used torch handle a few years ago off EBay. I forget the brand but was one of the small "aircraft" types we seek. I hooked it up and tried to pass gas, through it. But a funny thing was happening in that when I would open one gas line's valve the regulator for the other gas was showing a pressure change. After a few experiments I decided there was an internal leak between the two passages, between the valves and the outlet. I returned the handle for a refund. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline