Next installment. I finished the fork and did a little more work on the main triangle.
The fork with tips brazed to the blades fitted up in the jig. Set for 42mm of rake.
Fluxed and ready to braze....
Brazed and cooling in the fixture....
Checking alignment with the Campy "bells". Came out of the fixture needing no coldsetting.
Nice....Finished except for polishing the crown and paint.
I also face milled the headtube. I'll ream the tube for the headset cups when all the brazing is done
...Nice and square...Now on to the rear triangle, chainstays first.