Originally Posted by
philpeugeot
That's all I really have patience for, I hope to get some more work done over the weekend. I do have some worries though concerning the freewheel and crankset. After reinstalling the Suntour freewheel the rear wheel now makes some kind of noise akin to dry ball bearings. I tried putting some oil in there to see if anything would change, but only the ratcheting noise got quieter; the rough sound is still there. Anyone have any idea why I'm getting this noise after reinstallation? I'm also concerned about removing the cranks; some of you here mentioned that the cranks are Campy Victory and from my understanding the drive side requires a special tool to remove since it's left hand threaded. Is it true of this crankset? Any advice would be greatly appreciated.
If I understand correctly, since they are self extracting cranks the thread is left handed in the extraction area. If the hole extractor thing is there, then you simply remove the arm by turning the 7mm allen bolt with a socket and wrench. If the extractor thingy is missing then the special reverse threaded extractor is needed.
People can correct me if I am wrong.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super