Stem above steerer
1” threadless steel steerer tube
1” threadless brake cable hanger
1” to 9/8” spacer
9/8” stem
right now the steerer tube is flush with the top of the stem. I realize that the top pinch bolt of the stem needs to be below the top of the steerer tube.
I would like to raise the handle bars a 1/2” or so, though I cannot flip the stem for decaleur reasons.
can I get a taller 1” to 9/8” spacer that comes over the top of the steerer tube, add 10 or so mm of spacers and still maintain a safe level clamping?