The frame/fork are done, or all but the paint is done. Since this is for no person i won't deal with paint until it's worth my while. I might play with this later in the summer... For now the sanding and blasted finish with Phosphate rust inhibitor applied will do. I was pretty happy how most all of this came out. There are a few small brazing surface contours that could have been nicer but it's relatively straight with very little after brazing tugging. The old Cyclery North jigs with my mods worked well although I did run the mitering and fit up of tubes "past" my Anvil jig.
Here's a few shots. next up is a Rey 531 smaller frame in the style of the early/mid 1970s Raleigh Pros. If any one has any insight with these iconic rides I'm all ears. Andy
