Steve B.

Here's a few photo's. #1 attempts to show the fender at the bottom bracket mount, Not a ton of clearance and no way to install the bolt back to front, which is the easiest access method. i also installed some rubber spacers to position the fender away from the tire. #2 shows the bolt head on the b-bracket side of the vertical mount. I had to trim the fender to fit it forward of the mount. #3 shows that there is reasonable clearance at the brake bridge on the seat stays. #4 is the view of the lower fender mount at the b-bracket area. Miyata installed a bracket welded between the chainstays to have a vertical mount for the lowest fender mount position.