Originally Posted by
Moe Zhoost
Are you sure that you have a 10 x 1mm axle? There is some chance that it could be 3/8" x 26 tpi. They are pretty close and some folks have attempted to force an incorrect cone or nut onto them. Have you measured?............
A 1mm thread pitch is 25.4 TPI. Mighty close to 26 TPI.
10mm is .394" vs .375" for 3/8".
ISTR that cones from one will screw on to the other, but not the opposite way?
A 3/8"x 24 (SAE) bolt screws into a 10mm x1mm nut no problem, but not the other way.
