Old 10-15-21, 08:32 AM
  #1002  
m@tty
Newbie
 
Join Date: Dec 2020
Posts: 62
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 28 Post(s)
Liked 34 Times in 21 Posts
Originally Posted by Godsight
Really nice, is there good clearance between the chainstay and the chainring if you want to go with bigger chainring like 60+ ?
I don’t have any chainrings that size to try but there looks to be enough clearance for 60+ using my maths which might not be correct? there appears to be about 25mm extra radius clearance at the chainstay with a 53T on so that would equate to 50mm extra diameter and each tooth increases diameter by roughly 4mm
So 50/4 = 12.5 and 53+12 = 65 so you might squeeze a 65T on but anything more might require spacing.
m@tty is offline  
Likes For m@tty: