Originally Posted by
datlas
Hey I was looking at my CX bike yesterday and noticed the front brake was rubbing on one side. It has cable-activated disc brakes. Is there an easy way to re-center this?? I know next to nothing about disc brakes. The rub is very slight. I pulled the brakes several times in the vain hope that it would self-center, but no dice. Looking down over the brake, I can see that the right side has 1mm clearance but the left side is touching the rotor.
I'm only guessing that it's the same as hydro discs...
Loosen caliper bolts. Squeeze brake lever and hold. Tighten caliber bolts (progressively). Release brake lever.
BTW - The kids are calling those bikes "gravel bikes" now.