Originally Posted by
datlas
Agree. It took me some time to learn about the cable tension screw (make two white lines align) and the top cap that cable runs through is interesting but good once you thread it properly. If you have a braze on don’t forget about that inner plate thingy!
The old unit had that stand-off screw and the “braze-on” has its own pressure plate. Sticking that thing onto the tube with the derailleur mounted would have been a bit fiddly. My cable is frayed from the clamp on the old one and needs to be replaced, but I got the end through the cap and put an end cap on it. I was afraid I’d lose it otherwise.